• 대한의용생체공학회:의공학회지
• /
• 제31권5호
• /
• pp.401-406
• /
• 2010

Recently, many implantable medical devices have been developed and manufactured in many countries. In these devices, generally, energy is supplied by a transcutaneous method to avoid the skin penetration due to the power wires. As the most transcutaneous power transmission methods, the electromagnetic coupling between two coils and resonance at a specific frequency has been used widely. However, in case of a transcutaneous power transmitter with a fixed switching frequency to drive an electromagnetic coil, inefficient power transmission and thermal damage by the undesirable current variation may occur, because the electromagnetic coupling state between a primary coil and a secondary coil is very sensitive to skin thickness of each applied position and by person. In order to overcome these defects, a transcutaneous power transmitter of which operating frequency can be automatically tracked into the resonance frequency at each environment has been designed and implemented. Through the results of experiments for different coil surroundings, we have been demonstrated that the implemented transcutaneous power transmitter can track automatically into a varied resonance frequency according to arbitrary skin thickness change.

• 한국안전학회지
• /
• 제35권4호
• /
• pp.84-91
• /
• 2020

The Korean nuclear industry developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code and this code adpots two-phase flows, two-fluid, three-field models which are comprised of gas, continuous liquid and droplet fields and has a capability to simulate three-dimensional model. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for accident management plan of nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification work for separate and integral effect experiments is required. In this reason, the goal of this work is to verify calculation capability of SPACE code for multiple failure accident. For this purpose, it was selected the experiment which was conducted to simulate a Multiple Steam Generator Tube Rupture(MSGTR) accident with Passive Auxiliary Feedwater System(PAFS) operation by Korea Atomic Energy Research Institute (KAERI) and focused that the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The MSGR accident has a unique feature of the penetration of the barrier between the Reactor Coolant System (RCS) and the secondary system resulting from multiple failure of steam generator U-tubes. The PAFS is one of the advanced safety features with passive cooling system to replace a conventional active auxiliary feedwater system. This system is passively capable of condensing steam generated in steam generator and feeding the condensed water to the steam generator by gravity. As the results of overall system transient response using SPACE code showed similar trends with the experimental results such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it could be concluded that the SPACE code has sufficient capability to simulate a MSGTR accident.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.189-195
• /
• 1999

We have studied the vortex dynamics in YBa$_2Cu_3O_7$ single crystals with columnar defects using micro Hall-probe array. The Hall-probe array technique allowed a simultaneous measurement of the time and spatial dependence of the vortex density so that more detailed information on flux dynamics could be obtained. We found that field profiles inside sample were similar to the Bean's critical state model from the magnetic hysteresis measurement. Normalized relaxation rates were maximum near the center and decreased toward the edge if applied field H$_{app}$ is greater than the penetration field H. But applied magnetic field H$_{app}$ is less than H, relaxation rates were minimum near the center and increased toward edge. We found that glassy exponent ${\mu}$ has the value of ${\sim}$ 1 whose corresponding vortex motion is half-loop excitation. However, single vortex creep, ${\mu}$ ${\sim}$ 1/7, was also found at 30 K and H$_{app}$ ${\cong}$ H'. Calculation of activation energy, U, was possible from direct analysis of the local relaxation data using the basic diffusion equation. From these results, we found that U increases logarithmically with time and U around center was lower than that at the edge.

• 문화기술의 융합
• /
• 제3권3호
• /
• pp.31-36
• /
• 2017

본 연구는 보습상태에서 피부의 각질층에 변화상태를 구조적으로 모델링한다. 피부구조에 따라 진행되는 형태는 세포사이와 세포횡단의 조건으로 조절 할 수 있도록 하였고, 구조적인 모델링으로 시스템의 변화상태를 확인하였다. 보습조건에서 크기 형태 조합의 모형을 구성하고, 결과적으로 보습상태의 피부 임피던스는 각층에 따라 피부에 측정 임피던스가 ${\xi}-R-SC-RH$, ${\xi}-R-SL-RH$, ${\xi}-R-SG-RH$, ${\xi}-R-SS-RH$ 와 ${\xi}-R-SB-RH$ 로 다른 형태로 나타났다. 보습조건에서 S-Corneum, S-Lucidum, S-Granulosum, S-Spinosum 과 S-Basale의 변화의 차가 있고, 변환을 제어하는 전달시스템을 구성과 변환모델을 세분화하여 구축하였다. 이를 통하여 보습상태에서 피부의 기능적 효능조절이 가능한 보습조절시스템이 구성되어 지속적인 피부의 개선효과가 진행 될 것으로 예상된다. 투과 조절시스템이 구성되어 지속적인 피부의 개선효과가 진행 될 것으로 예상된다.

• 대한치과교정학회지
• /
• 제47권4호
• /
• pp.238-247
• /
• 2017

Objective: The aim of this study was to compare recycled and unused orthodontic miniscrews to determine the feasibility of reuse. The comparisons included both miniscrews with machined surfaces (MS), and those with etched surfaces (ES). Methods: Retrieved MS and ES were further divided into three subgroups according to the assigned recycling procedure: group A, air-water spray; group B, mechanical cleaning; and group C, mechanical and chemical cleaning. Unused screws were used as controls. Scanning electron microscopy, energy-dispersive X-ray spectrometry, insertion time and maximum insertion torque measurements in artificial bone, and biological responses in the form of periotest values (PTV), bone-implant contact ratio (BIC), and bone volume ratio (BV) were assessed. Results: Morphological changes after recycling mainly occurred at the screw tip, and the cortical bone penetration success rate of recycled screws was lower than that of unused screws. Retrieved ES needed more thorough cleaning than retrieved MS to produce a surface composition similar to that of unused screws. There were no significant differences in PTV or BIC between recycled and unused screws, while the BV of the former was significantly lower than that of the latter (p < 0.05). Conclusions: These results indicate that reuse of recycled orthodontic miniscrews may not be feasible from the biomechanical aspect.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.47-54
• /
• 2008

컴포넌트에서의 비정상적인 금속간화합물 성장이 보드 레벨 기계적 신뢰성에 미치는 영향을 연구하기 위하여, 전기 도금된 Ni/Au UBM과 Sn2.5Ag0.5Cu 솔더의 리플로우 횟수 및 고온 시효 시간에 따른 금속간 화합물 성장거동을 관찰하였다. 각 조건별로 처리된 컴포넌트에서 솔더 접합부의 기계적 특성을 비교하기 위하여, 전단 속도 변화에 따른 볼 전단 시험을 실시하여 전단에너지 값을 측정하였다. 마지막으로, 보드 레벨에서의 기계적 신뢰성 시험을 위하여 조건별로 처리된 컴포넌트를 PCB 보드에 실장하여, 3점 굽힘 시험 및 충격 시험을 실시한 후 파괴모드를 분석하였다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.345-352
• /
• 2017

중량 콘크리트는 고파랑에 대한 저항성 상승을 위해 해양 구조물에 사용될 수 있다. 그러나 중량 콘크리트를 제조하기 위해 필수적인 재료인 중량 골재는 대량 공급이 어려우며, 고가이므로 사용이 제한되고 있다. 따라서 본 연구에서는 산업부산물인 동슬래그 및 제강슬래그의 해양 콘크리트용 중량 골재로써 활용성을 평가하였다. 실험 결과 동슬래그는 수침팽창 및 알칼리 실리카반응성이 안정적인 것으로 나타나 해양 콘크리트용 중량 골재로서 활용이 가능할 것으로 판단된다. 그러나 제강슬래그는 수침팽창 및 ASTM C 1260 시험에서 높은 팽창율을 보였다. 또한 콘크리트 내 제강슬래그가 위치한 곳에서 염화물 이온이 깊게 침투한 것이 발견되었다. 따라서 제강슬래그는 해양 콘크리트 구조물의 골재로서는 부적합한 것으로 사료된다.

• 한국방사선학회논문지
• /
• 제11권4호
• /
• pp.177-181
• /
• 2017

방사선 생물학적 효과(Radio biological effectiveness, RBE)를 선량에 대부분 의존하는 X선과 달리 탄소빔의 경우 LET의 변화량은 반드시 고려되어야할 사항이다. 이는 X선 과는 극히 대조적인 선량 분포도를 갖고 있기 때문이며 LET의 변화량이 중요한 이유가 된다. 따라서 기존의 LQ 모델이나 회복생존모델의 경우 이러한 점이 감안되지 않아 탄소빔의 분할 조사 시 문제점을 보이며 오류를 보이고 있다. 본 연구에서는 약 $75keV/{\mu}m$의 고LET 탄소빔 분할 조사 시 Potentially Lethal Damage Repair (PLDR)의 발생양을 확인하고 약 $13keV/{\mu}m$ 저LET 조사와 비교하여 현저히 감소하였음을 확인하였다. PLDR의 감소에 따라 생존율 또한 감소하였다. 따라서 탄소빔의 생물리학적 모델 개발에 LET의 변화량은 반드시 고려되어져야 할 것으로 보인다.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1793-1799
• /
• 2003

An optimal design of a multi-layered plate structure to endure high-velocity impact has been suggested by using size optimization after numerical simulations. The NET2D, a Lagrangian explicit time-integration finite element code for analyzing high-velocity impact, was used to find the parameters for the optimization. Three different materials such as mild steel, aluminum for a multi-layered plate structure and die steel for the pellet, were assumed. In order to consider the effects of strain rate hardening, strain hardening and thermal softening, Johnson-Cook model and Phenomenological Material Model were used as constitutive models for the simulation. It was carried out with several different gaps and thickness of layers to figure out the trend in terms of those parameters' changes under the constraint, which is against complete penetration. Also, the measuring domain has been shrunk with several elements to reduce the analyzing time. The response surface method based on the design of experiments was used as optimization algorithms. The optimized thickness of each layer in which perforation does not occur has been obtained at a constant velocity and a designated total thickness. The result is quite acceptable satisfying both the minimized deformation energy and the weight criteria. Furthermore, a conceptual idea for topology optimization was suggested for the future work.

• 한국전산구조공학회논문집
• /
• 제33권1호
• /
• pp.17-23
• /
• 2020

본 논문에서는 인공섬 형식의 방호공을 구성하는 수중사면에 선박이 충돌하는 경우 발생하는 선박과 지반의 거동을 해석하기 위한 모델을 Coupled Eulerian-Lagrangian(CEL) 기법을 이용하여 구성하였다. 충돌에서 발생하는 지반의 전단파괴를 포함하는 대변형을 고려하기 위하여 지반과 해수는 Eulerian 영역으로 구성하고 충돌체를 Lagrangian 영역으로 구성되었다. 해석의 효율성을 향상시키기 위해서 mass scali기법을 충돌체의 모델링에 도입하였으며, 지반은 Eulerian영역에서 Eulerian Volume Fraction(EVF)값을 설정하여 구성하였다. 작성된 모델의 적용성을 검증하기 위하여 동적관입앵커에 대한 해석을 수행하였다. 또한 컨테이너선의 외부형상에 따라 고체요소로 모델링된 선수가 수중사면에 충돌하는 경우의 해석을 수행하고, 그 때 발생하는 변위, 속도, 소산에너지 등의 거동을 평가하였다. 그 결과로 매개변수해석에 대한 추가적인 연구 필요성이 도출되었다.