• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.256-261
• /
• 2004

This study grafts geophysics on modem archaeology and approaches with scientific and systematic methods to an excavation plan or archaeological study by means of GPR exploration which can assist archaeologists to study Wolseong fortress without excavating it. We investigated the areas in front of Seokbinggo (ice storage facility built of stone) and in the eastern corner of the castle with GPR. As a result, we detected 7 large squared building foundations, stone walls, an entrance for the fortress, many other foundation stones, a road and a garden.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1159-1164
• /
• 2006

Broadband antennas have late-time ringing by multi-reflections between feed points and 0pen ends of the antennas, which indicates the narrowband nature of the antenna. The resistive loading has been used to reduce the late time ringing that is important for ground penetrating radar and resonance detection systems in order to prevent masking of target. In this paper, we design an ultra wide band antenna with resistive loading technique to reduce the internal reflections within the antenna.. The designed antenna is implemented and tested to show inIproved characteristics.

• Journal of Surface Science and Engineering
• /
• v.46 no.6
• /
• pp.264-270
• /
• 2013

Effects of preoxidation on high temperature wear of piercing plug tool steel sliding against SA210C steel used for production of seamless tube have been studied using a pin-on-disc CETR tribometer, under applied normal load of 20 N at $900^{\circ}C$ in air. It was found in the preoxidized pin specimens of piercing plug tool steel that the coefficient of friction decreased to about 0.4 at an initial stage followed by showing nearly constant value of about 0.4 during high temperature wear testing. On the other hand, it was also found in the pin specimens without preoxidation that the coefficient of friction increased and fluctuated, ranging from about 0.3 to 0.6 during the tests until the running period of about 800 sec. The compact and continuous Fe-oxide layer was formed on the contact surface of the preoxidized pin specimens after high temperature wear testing followed by penetrating along the grain boundaries of coarse ferrite in the decarburized region beneath the oxide layer due to the lower hardness of the region.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.808-811
• /
• 2010

Simultaneous occurrence of the trachea, esophagus, and spinal cord injuries due to stabbing is rare. The incidence is decreasing, but early diagnosis and surgical treatment is important because it can be life-threatening. We present one case of simultaneous trachea, esophagus, and spinal cord injury caused by self-stabbing complicated with paraplegia.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1871-1876
• /
• 2004

We demonstrate a novel fabrication technology for the microneedle array that can be used in the medical test field, which is transdermal drug delivery and blood analyte sampling. Previous researchers have used silicon-processed micromachining, a reactive ion etching, and molding techniques for the fabrication of microneedle array. However, these fabrication techniques have somewhat limitations apply to the microneedle array fabrication according to its application. Inclined LIGA process is suggested to overcome these problems. This process provides easier, sharper and longer out-of-plane microneedle array structure than conventional silicon-processed fabrication method did. Additionally, because of the advantage of the LIGA process based on mold fabrication for mass production, the polymer, PMMA(PolyMethylMethAcrylate), based microneedle array is useful as the mold base of nickel electroplating process; on the other hand, silicon-processed microneedle array is used in itself. In this research, we fabricate different types of out-of-plane microneedle array, which have different shape of tip, base and hole structure, using the inclined LIGA process. The fabricated microneedles have proper mechanical strength, height and sharpness to puncture human hand epidermis or dermis with less pain and without needle tip break during penetrating the skin.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.4
• /
• pp.383-396
• /
• 2000

Before the advent of early plastic or maxillofacial reconstructive surgery, facial features could only be replaced and mimicked by prosthetic, artificial means. Facial deformity or dysfunction, whether congenital or acquired by trauma or mutilating disease, has long been an area of constant research, development and innovation in many cultures of the world. One of the greatest contributors to the need for maxillofacial prosthetics has been physical conflict and warfare. The use of maxillofacial prostheses is not merely the replacement of a missing or disfigured aspect of the face, but the rehabilitation of that individual back into the society from which they originate. Rehabilitation includes the restoration of the person's self worth and confidence, not just physically but psychologically. In sixteenth century, Ambroise Pare, French military surgeon, first have tried many maxillofacial prosthetics for injured war soldiers with papier-mache, silver, gold and copper. According to patient's demand who lost their maxillofacial figures, maxillofacial personnel have increased and prosthetic's skill have been advanced all of the world. Over the last decade, there has been a very rapid development in technical possibilities to provide patients with facial prostheses retained by skin penetrating implants. This article will present overall history of maxillofacial prostheses and some background information on the materials used from the old world. And to overcome still many limitation of prosthetic, new minds and new ideas for technique and materials should be developed.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.217-231
• /
• 2015

A novel fuzzy learning framework that employs fuzzy inference to solve the problem of Multiple Instance Learning (MIL) is presented. The framework introduces a new class of fuzzy inference systems called Multiple Instance Mamdani Fuzzy Inference Systems (MI-Mamdani). In multiple instance problems, the training data is ambiguously labeled. Instances are grouped into bags, labels of bags are known but not those of individual instances. MIL deals with learning a classifier at the bag level. Over the years, many solutions to this problem have been proposed. However, no MIL formulation employing fuzzy inference exists in the literature. Fuzzy logic is powerful at modeling knowledge uncertainty and measurements imprecision. It is one of the best frameworks to model vagueness. However, in addition to uncertainty and imprecision, there is a third vagueness concept that fuzzy logic does not address quiet well, yet. This vagueness concept is due to the ambiguity that arises when the data have multiple forms of expression, this is the case for multiple instance problems. In this paper, we introduce multiple instance fuzzy logic that enables fuzzy reasoning with bags of instances. Accordingly, a MI-Mamdani that extends the standard Mamdani inference system to compute with multiple instances is introduced. The proposed framework is tested and validated using a synthetic dataset suitable for MIL problems. Additionally, we apply the proposed multiple instance inference to fuse the output of multiple discrimination algorithms for the purpose of landmine detection using Ground Penetrating Radar.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.56-63
• /
• 2014

To develop and understand dissimilar metals joining of Stainless steel and Copper, ultra-high speed laser lap welding was studied using single mode fiber laser in this study. SUS304 and Cu have large differences in materials properties, and Cu and Fe have no intermetallic compounds by typical binary phase of Cu and Fe system. In this study, ultra-high speed lap welds of SUS304 and Cu dissimilar metals using single-mode fiber laser was generated, and weldability of the weld fusion zone was evaluated using a tensile shear test. To understand the phenomenon of tensile shear load, weld fusion zone of interface weld area and fracture parts after tensile shear test were observed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) analysis system. And it was confirmed that Cu was easily melting and penetrating in the grain boundaries of SUS304 because of low melting temperature. And high thermal conductivity of copper occurred dissipate heat energy rapidly. These properties cause the solidification cracking in weld zone.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.108-115
• /
• 2016

In this paper, fluid-structure of interaction behavior of a fluid-filled cylindrical polymer container impacted by a high speed spherical projectile was studied using ALE(Arbitrary Lagrangian Eulerian) method. The hydrodynamic ram phenomenon occurred by the impact projectile penetrating through the container was investigated by examining time histories of projectile velocity and fluid pressure and density. The analysis results were agreed reasonably well compared to those by experiments.

• Journal of Korean Academy of Nursing
• /
• v.1 no.1
• /
• pp.95-102
• /
• 1970

Ascariasis symptoms penetrated into biliary tract are reported to be found much more in Korea than in foreign countries. And the present writer believes there are also many cases of biliary tract symptoms that are actually experienced but that are not reported. As a result of experiencing and nursing twenty cases of ascariasis symptoms of biliary tract, the present writer has got several conclusions, and reports them together with reference to sundry records. (1) The penetrating rate of ascariasis in male versus female was 1 to 1.5. Consequently the rate of female was higher than that of male. The highest age of the case was 67, the lowest 19, and the average age was 45.2. (2) As to symptoms, right upper quadrant abdomen pain and fat diet intolerance were the largest in number. By laboratory findings there were depressive pain on right upper quadrant abdomen in all the cases. (3) As to the location of ascariasis, choledochus occupied the largest part, and the longer illness history was, the more cases coexisting with calculus were found. (4) As to operative method, cholecystectomy and choledochotomy weres the largest in number, and choledochotomy T-tube was inserted in all cases. As to complication after operation, there were operative wound infection, excoriation through bile juice issue, etc. There were three cases of re-penetration of ascariasis and only one case of reoperation.