• 한국약용작물학회지
• /
• 제7권1호
• /
• pp.27-30
• /
• 1999

작약 수확후 건조과정중 양질의 약재 생산을 위한 기초자료를 얻고자 뿌리약초 박피기를 이용하여 껍질제거시 박피시간을 달리하여 시험한 결과를 요약하면 다음과 같다. 작약근의 기계박피시 표피 부분만 제거하고 피층부분의 수량손실과 paeoniflirin 함량의 손실을 방지하기 위한 적정 기계박피시간은 1회에 $10{\sim}30$분이 었다. 작약근 부위별 paeoniflorin 함량은 박피시간이 길어질수록 감소하였고, 상위부>하위부>중위부 순으로 노두부분과 인접한 상위부가 가장 높았다. 건조 작약 절단 전에 수처리시 박피 및 수침시간이 길어질수록 paeoniflorin의 유실량이 많았고, 색도 변화는 박피시간이 길어짐에 따라 적갈색의 표피 부분이 제거되어 명도가 증가하고 총 색도가 감소하였다.

• 한방안이비인후피부과학회지
• /
• 제36권3호
• /
• pp.140-149
• /
• 2023

Objectives : The purpose of this study is to present the effect of subcision, microneedle therapy system and herbal peeling therapy which is treatment of Korean medicine to atrophic acne scar patients. Methods : We administered subcision, microneedle therapy system and herbal peeling therapy to atrophic acne scar patients and tested the results by Qualitative Global Acne Scarring Grading System and Korean Acne Grading System as well. Results : After the treatment, all of the patients showed improvements in Qualitative Global Acne Scarring Grading System and Korean Acne Grading System as well. Qualitative Global Acne Scarring Grading System of patients changed from grade 2.71±0.71 to grade 1.14±0.86 along with the change of Korean Acne Grading System from grade 1.57±0.57 to grade 1.00±0.00. Conclusions : Subcision, microneedle therapy system and herbal peeling therapy may be effective in the treatment of moderate to severe acne scars, and could be applied in clinical practice.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.914-917
• /
• 2001

Single-shot laser damage of thin Cr films on glass substrates has been studied to understand the cracking and peeling-off mechanism. A numerical model is developed for the calculation of transient heat transfer and thermal stresses in Cr films during excimer laser irradiation and cooling, the transient temperature, and the stress-strain fields are analyzed by using a three-dimensional finite-element model of heat flow. According to the numerical analysis for the experimentally determined cracking and peeling-off conditions, cracking is found to be the result of the tensile brittle fracture due to the excessive thermal stresses formed during the cooling process, while peeling-off is found to be the combined result of films bulging from the softened glass surface at higher temperature and the tensile brittle fracture during the cooling process.

• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.351-357
• /
• 1993

Recently, a garlic peeler with high performance is being demanded due to increase of consumption of peeled garlic. Although the air type out of various types of garlic peelers is recommended to remove effectively skin of garlic, it has an important problem of large energy consumption. This study was performed to analyze performance of an air-type garlic peeler for its optimum design. Performance indices to represent performance of garlic peeler include peeling ratio, energy efficiency and peeling performance. The factors such as aperture of nozzle, angle and position of air injection, charge rate of garlic, peeling time and so on must be considered to design optimally an air-type garlic peeler.

• Advances in materials Research
• /
• 제8권1호
• /
• pp.1-10
• /
• 2019

Roll bonding (RB) process of bi-metal laminates as a new noble method of bonding has been widely used in the production of bimetal laminates. In the present study, asymmetric roll bonding process as a new noble method has been presented to produce Al/Cu bimetallic laminates with the thickness reduction ratios 10%, 20% and 30% together with mismatch rolling diameter ($\frac{R_2}{R_1}$) ratio 1:1, 1:1.1 and 1:1.2. ABAQUS as a finite element simulation software was used to model the deformation of samples. The main attention in this study focuses on the bonding properties of Al/Cu samples. The effect of the $\frac{R_2}{R_1}$ ratios was investigated to improve the bond strength. During the simulation, for samples produced with $\frac{R_2}{R_1}=1:1.2$, the vertical plastic strain of samples was reach the maximum value with a high quality bond. Moreover, the peeling surface of samples after the peeling test was investigated by the scanning electron microscopy (SEM).

• Advances in Computational Design
• /
• 제4권1호
• /
• pp.33-41
• /
• 2019

In this study, 2-mm Al/Cu bimetallic laminates were produced using asymmetric roll bonding (RB) process. The asymmetric RB process was carried out with thickness reduction ratios of 10%, 20% and 30% and mismatch rolling speeds 1:1, 1:1.1 and 1:1.2, separately. For various experimental conditions, finite element simulation was used to model the deformation of bimetallic Al/Cu laminates. Specific attention was focused on the bonding strength and bonding quality of the interface between Al and Cu layers in the simulation and experiment. The optimization of mismatch rolling speed ratios was obtained for the improvement of the bond strength of bimetallic laminates during the asymmetric RB process. During the finite element simulation, the plastic strain of samples was found to reach the maximum value with a high quality bond for the samples produced with mismatch rolling speed 1:1.2. Moreover, the peeling surfaces of samples around the interface of laminates after the peeling test were studied to investigate the bonding quality by scanning electron microscopy.

• 혜화의학회지
• /
• 제13권2호
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.335-338
• /
• 2003

Flexural test and parametric study by FEM analysis on 6.0m long reinforced concrete beams strengthened by GFRP are reported in these tests. The selected variables are strengthened plate length, plate thickness. The effects of these variables are discussed. The results generally indicate that the flexural strength of strengthened beams is increased. The results of FEM analysis show that the more strengthening GFRP is the more stress of GFRP is decrease when failure mode is peeling failure.

• 한국약용작물학회지
• /
• 제5권3호
• /
• pp.211-216
• /
• 1997

작약(芍藥) 수확후(收穫後) 조제과정(調製過程)과 관련하여 양질의 약재(藥材)를 생산하기 위한 기초자료를 얻고자 박피정도(剝皮程度)에 따라 건조방법(乾燥方法)을 달리하여 시험한 결과를 요약하면 다음과 같다. 1. 작약은 수확후 수세(水洗)만 거치고 껍질을 제거하지 않은 무박피가 박피기로 기계박피한 것에 비하여 박피노력절감 및 15%의 수량 손실 방지 효과를 나타내었다. 2. 작약(芍藥) 건조시(乾燥時) 수분함량 14%에 도달하기 위한 소요시간은 무박피가 박피보다 건조시간이 길어지는 단점이 있었다. 3. 주성분(主成分) Paeoniflorin 함량은 표피에 5.11%, 피층에 3.28%로 껍질부분에 다량 함유하고 있어서 무박피가 Paeoniflorin함량이 유실없이 그대로 보존되어 박피작약보다 높았고, 건조방법 간에는 상온 음건이 가장 높았다. 4. 박피작약(剝皮芍藥)의 경우 건조근(乾燥根)의 색상은 연탄불 건조후 열풍건조가 가장 양호하여 연 탄훈증 효과가 현저하였으나 무박피작약(無剝皮芍藥)에는 별다른 영향을 미치지 않았으므로 열풍만으로도 건조가 가능하였다.

• Journal of Biosystems Engineering
• /
• 제31권2호
• /
• pp.121-127
• /
• 2006

An Altari radish pre-processing system, which feasible to process automatically such operations as leaf and root tail cutting and root peeling, for kimchi production was accomplished based on the foregone serial studies. In this study, the performances of the developed prototype machine, considered as a commercializing level, were analyzed and evaluated. The prototype machine attached Tiny PLC automatic control system was performed the sequent function as the rate of successful peeling was more than 98% for the Altari radish less than 70 mm diameter of a radish. The operating efficiency of this was 9 see/each, 128 kg/h, and it means as much as $5{\sim}6$ times that of a woman labor's. The sanitation and taste of the mechanized-processed Altari radish kimchi was almost same as that of the handmade. And they were suitable for manufactory of kimchi as the both short term ripening and storing kimchi. Developed machinery with one peeling device and two peeling devices that compared with hand processing, it was analyzed that the break-even yearly working days were 28 days and 19 days, and the break-even yearly processing amount were 28,700 kg, 32,400 kg, respectively.