• The KSFM Journal of Fluid Machinery
• /
• v.17 no.4
• /
• pp.30-39
• /
• 2014

The cross flow turbine is economical because of its simple structure. For remote rural region, there are needs for a more simple structure and very low head cross flow turbines. However, in this kind of locations, the water from upstream always flows into the turbine with some other materials such as sand and pebble. These materials will be damage to the runner blade and shorten the turbine lifespan. Therefore, there is a need to develop a new type of cross flow turbine for the remote rural region where there is availability of abundant resources. The new design of the cross flow turbine has an inlet open duct, without guide vane and nozzle to simplify the structure. However, the turbine with inlet open duct and very low head shows relatively low efficiency. Therefore, the purpose of this study is to optimize the shape of the turbine inlet to improve the efficiency, and investigate the internal flow of a very low head cross flow turbine. There are two steps to optimize the turbine inlet shape. Firstly, by changing the turbine open angle along with changing the turbine inlet open duct bottom line (IODBL) location to investigate the internal flow. Secondly, keeping the turbine IODBL location at the maximum efficiency achieved at the first step, and changing the turbine IODBL angle to improve the performance. The result shows that there is a 7.4% of efficiency improvement by optimizing turbine IODBL location (open angle), and there is 0.3% of efficiency improvement by optimizing the turbine IODBL angle.

• The Korean Journal of Quaternary Research
• /
• v.16 no.1
• /
• pp.17-27
• /
• 2002

Analysis of No. 199∼145 cross-sections set up by the Ministry of Construction (1978) in the middle reaches of the Sumjin River around Sunchang, Daegang, and Goksung areas have been done for delineating the changes In fluvial geomorphic features. The entire river-bed in the study area has been considerably degraded since 1978. In some cross-sections, the thalweg shillings are observed. Two aspects are responsible for the erosion-dominant environment. First, flow velocity has been increased. Human activities including wetland destruction, ex-channel destruction and artificial levee construction reduced the channel width, and fixed the channel geometry. This has resulted in increase of the water velocity. Pebble and granule∼coarse sand are prevailing on the river-bed, indicate the high speed of the currents. Second, aggregate has been intensively mined during 1980s∼1990s around the areas. Especially, in the right side of the cross-sections No. 188∼187 and the left side of the cross-section No. 155, erosion toward under the artificial levee is remarkable. This can be led to bank failure in case of heavy rainfall.

• Korean Journal of Environmental Biology
• /
• v.30 no.2
• /
• pp.143-150
• /
• 2012

To determine the spatial distribution of marine invertebrate communities in intertidal rocky shore on Dokdo, 10 times investigation was carried out at 7 stations during the year of 2009~2011. The marine invertebrate community can be divided into three different groups based on cluster analysis of Bray-Curtis similarity. As a first group, the pebble beach community, Omphalius rusticus, Monodonta perplexa, and Chlorostoma lischkei which were movable gastropod with dominant occurrence. Secondly, the still rocky shore community, O. rusticus, Serpulorbis imbricatus and Aplysia kurodai occurred dominantly. Finally, the wave-exposed rocky shore community which dominantly occurred by two sessile arthropods, Barnacles, Chthamalus challengeri and Pollicipes mitella. The three groups were likely to be determined by texture of substrate and hydrodynamic conditions of rocky shore in Dokdo. The results indicated that diversity of marine intertidal invertebrate community around Dok do was mainly affected by habitat characteristics and the surrounding physical properties.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.133-149
• /
• 2000

The study area which contains the coastal terrace of the southeastern part of Korean peninsula, well developed the lineaments which are NNE, NE and WNW directions. The area crops out Cretaceous sedimentary rocks and granite porphyry, Tertiary conglomerate, tuffite and basalt and Quarternary deposits. Coastal terraces are subdivided into low, middle and upper terraces(LT, MT, UT) based on the topographic levels. Terrace gravels are deposited on these wave-cut erosional surface during the initial lowering stage of sea level fluctuation. Terrace gravels are typified by granule to pebble layers with slightly inclined beddings. These gravels are interpreted as beach gravels belonging to berm or swash zone based on the present distribution of beach gravels. The Suryum fault is characterized by the thrust which is gradationally changing the strike from ENE to NNE. The extension of the fault is about 200m and Maximum displacement is about 1.5m.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.437-446
• /
• 2004

To develop sewage treatment apparatus by natural purification method, the sewage treatment plant that consisted of aerobic and anaerobic plot was constructed. And then, the effects of treatment conditions on the removal of pollutants in the relation to sewage loading, sewage injection method and season according to the pebble kind. Removal rate of BOD and COD according to the sewage loading in effluent were over 95 and 77%, respectively. Removal rate of nitrogen in treated water by aerobic plot and effluent using sand were about 22~40 and 49~75%, respectively. Those of effluent using sand 75%+ oyster shell 25% and sand 50%+ oyster shell 50% as filter media in comparison with using sand were about 7~25 and 16~23%, respectively. Removal rate of phosphorus in treated water by aerobic plot and effluent using sand as filter media were about 30~36 and 52~56%, respectively. Those of effluent using sand 75%+ oyster shell 25% and sand 50%+ oyster shell 50% in comparison with using sand as filter media were about 11~40 and 12~45%, respectively. Removal efficiency of BOD and COD according to the intermittent injection method of sewage were slightly decreased, but those of nitrogen and phosphorus were little varied in comparison with continuous injection method. Removal efficiency of BOD and COD in winter in comparison with the others were little varied, but those of nitrogen and phosphorus slightly decreased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.415-415
• /
• 2011

국제핵융합실험로(ITER)에 장착되는 한국형 헬륨 냉각 고체형 증식(Helium Cooled Solid Breeder : HCSB) 시험 블랑켓(Test Blanket Module : TBM)은 ITER 참여국 중 유일하게 중성자 반사 재료를 채택한 것이 특징이다. 중성자 반사재료로는 지름 1 mm 내외의 흑연 페블을 사용 할 예정이다. 흑연은 중성자 반사특성은 우수하지만 기계적 특성이 비교적 좋지 않다는 단점이있다. 뿐만 아니라, 산화나 화재 등에 대해서도 취약하기 때문에 흑연이 노출된 상태로 사용하는 것은 위험부담이 클 수밖에 없다. 따라서 흑연을 코팅해서 사용하기 위한 연구개발이 진행 중이며, 코팅 후보물질로는 저방사화 및 고경도의 특성을 갖는 SiC가 유력시 되고 있다. 흑연위에 SiC를 코팅하는 방법은 여러 가지가 있으며, 그 중에서 비교적 간단한 RF Sputtering, PECVD를 이용해서 SiC를 코팅하고 그 특성을 평가했다. RF Sputtering에서 흑연의 온도를 상온으로 두었을 때는 SiC가 결정으로 성장되지 않는 것을 확인할 수 있었으며, $900^{\circ}C$ 이상의 온도에서 열처리과정을 거친 후 결정이 형성되는 것을 확인할 수 있었다. 그리고 열처리 온도가 $1200^{\circ}C$ 부근에서는 SiC nano-wire가 형성되는 것을 확인할 수 있었다. PECVD의 경우 전구체 물질로 사용된 $SiH_4$와 $CH_4$의 비율에 따라서 SiC의 형성비율이 다른 것을 알 수 있었으며, 결정 상태는 성장시 기판온도에 크게 의존하는 것을 확인할 수 있었다. 최근에는 보다 효율적으로 SiC를 코팅하기 위하여 흑연페블을 spouting시키면서 코팅할 수 있는 CVD 장치를 설계-제작했으며, 전구체 물질로는 $SiH_4$, $Si(CH_3)_4$, $CH_3$ $SiCl_3$ 등이 사용될 예정이다.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.5
• /
• pp.59-66
• /
• 2017

Preeminent water treatment plans are essential to preserve the water quality of aquatic biotopes. Previous studies have not been sufficient to provide cost-effective maintenance method since they focused only on the purification of deteriorated water that requires a continuous supply of clean water. This study proposes an economical method of water quality maintenance using water treatment media block constructed vertically using porous ceramics, zeolite, and river pebble. The water treatment media block does not require a separate purification area because it functions as a purifier within the ecological pond which can maximize the biotope area. To evaluate the performance of the water treatment media block, we longitudinally tracked the change of water quality indicators (pH, TDS, COND, DO, T-P, T-N, COD) suggested by Water Environment Standards, Ministry of Environment, Republic of Korea. We compared the water quality of one control (A: general ecological pond composition method of the laminated structure) and two experimental groups (B: a combination of aquatic plants and a water treatment media block, C: a water treatment media block only). As a result, we confirmed that the water treatment media block is an efficient and economical method to maintaining the water quality of the ecological pond for a long time. The water treatment media block will be a great help in providing a better aquatic biotope space for aquatic insects and fishes living in clear water.

• Journal of the Korean Ceramic Society
• /
• v.50 no.5
• /
• pp.333-340
• /
• 2013

To fabricate spherical lithium titanate ($Li_2TiO_3$) pebbles which are used for a breeder material in fusion reactor, titanium oxide ($TiO_2$) granules were used as a starting material. The granules were pre-sintered, and then aqueous lithium nitrate solution infiltrated into the granules at vacuum condition. The granules were crystallized to $Li_2TiO_3$ after sintering under the control of process parameters. In this study, the concentration of lithium in the solution, as well as the number of penetration times and sintering temperature affected the final crystallite phase and the microstructure of the pebbles. In particular, the sphericity and size of the pebbles were effectively controlled by a technical rolling process. The useful spherical $Li_2TiO_3$ pebbles which have 10~20% porosity and 60~120 N compressive strength were obtained through the sintering at $1000{\sim}1100^{\circ}C$ in the multi-times infiltration process with 50 wt% solution. The physical properties of pebbles such as density, porosity and strength, can be controlled by a selection of $TiO_2$ powders and control of processing parameters. It can be thought that the lithium penetration method is a useful method for the fabrication of mass product of spherical $Li_2TiO_3$ pebbles.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.107-112
• /
• 2007

To establish the reinforce region and technique through the embankment dike after identifying the region of seawater inflow, we carried out small-loop electromagnetic (EM) survey, electrical resistivity survey and refraction seismic method. We also analyzed the distribution of electrical conductivity in reservoir with depth every two month and monitored water level variations with tidal variation in four observation wells located at seaside and reservoir side in order to analyze the relationship with survey results. From both the cross-correlation between tidal and water level variation at four wells and the distribution of electrical conductivity in reservoir with depth, the major portion of seawater inflow are identified through the embankment dike. From electromagnetic and electrical resistivity survey results, it was found that the seawater inflow were happened through several small regions at seaside and became wider near reservoir side. The 2-D inversion sections of refraction seismic method showed that the pebble-bearing sand layer is spread over the whole region with two to four width. From the this study, small-loop EM, electrical resistivity and refraction seismic surveys accompany with the distribution of electrical conductivity in reservoir with depth and the monitoring results for water level variations are revealed to be effective to identify seawater inflow pathway through embankment dike and to establish the reinforce region and technique through the embankment dike.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2005

Hornblende $^{40}Ar/^{39}Ar$ age of $113.4{\pm}2.4(2{\sigma})$ Ma was determined from the volcanic pebble of the Silla Conglomerate which belongs to the Hayang Group of the Cretaceous Gyeongsang Supergroup. This age corresponds to the top of Aptian. Based on the reported age information, onset and duration of deposition of the constituting formations of the Hayang Group are constrained as follows; deposition of the Jindong Formation started from ca. 96~97 Ma and lasted for about 15 Ma. Therefore, Jindong Formation was deposited since Cenomanian to Santonian and it is likely to be extended to the early Campanian. We propose 81~80 Ma, which is in early Campanian, as the boundary between Hayang and Yucheon Groups. We suggest that the Silla Conglomerate was deposited during the early Albian and the Haman Formation was deposited during the rest of the Albian and also during the Cenomanian. The Chilgok Formation seems to be deposited during the late Aptian.