• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.583-585
• /
• 2004

In this paper we will deal with a calibration method for low cost motion capture system using psd(position sensitive detection) optical sensor. To measure the incident direction of the light from LED emitted marker, the PSD is used the output current ratio on the electrode of PSD is proportional with the incident position of the light focused by lens. In order to defect the direction of the light, the current output is converted into digital voltage value by opamp circuits peak detector and AD converter with the digital value the incident position is measured. Unfortunately, due to the non-linearly problem of the circuit poor position accuracy is shown. To overcome such problems, we compensated the non-linearly by using least-square fitting method. After compensated the non-linearly in the circuit, the system showed more enhanced position accuracy.

• ETRI Journal
• /
• 제28권1호
• /
• pp.115-118
• /
• 2006

In this letter, a simple model parameter extraction methodology for an on-chip spiral inductor is proposed based on a wide-band inductor model that incorporates parallel inductance and resistance to model skin and proximity effects, and capacitance to model the decrease in series resistance above the frequency near the peak quality factor. The wide-band inductor model does not require any frequency dependent elements, and model parameters can be extracted directly from the measured data with some curve fitting. The validity of the proposed model and parameter extraction methodology are verified with various size inductors fabricated using $0.18\;{\mu}m$ CMOS technology.

• 센서학회지
• /
• 제5권1호
• /
• pp.51-56
• /
• 1996

Structural properties of rf sputtered boron nitride films were studied as a function of deposition parameters such as nitrogen pressure, substrate temperature and substrate bias using X-ray photoelectron spectroscopy and Auger electron spectroscopy. Composition and information on chemical bonding of resultant films was determined by XPS. XPS core level spectra showed that ratio of boron to nitrogen varied from 3.11 to 1.45 with respect to partial nitrogen pressure. Curve fitting of XPS spectra revealed three kinds of bonding mechanism of boron in the films. XPS peak positions of both B 1s and N 1s shifted to higher energy with higher nitrogen pressure as well as increase in substrate bias voltage. AES was used to see possible contamination of films by carbon or oxygen as well.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.444-450
• /
• 2000

This study was performed to analyze the degree of consolidation by the dissipation of excessive pore water pressure and final settlement prediction methods of the very soft clay. Hyperbolic method, Asaoka method and curve fitting method were used to compute the degree of consolidation. The degree of consolidation with excessive pore water pressure were used to compute, which considered the dissipation time with embankment construction. The degree of consolidation that was obtained by the peak excessive pore water pressure was less than in the case of the dissipation excessive pore water pressure. And, the degree of consolidation by the total settlement was nearly the same value that of layer settlement. The degree of consolidation that was obtained by excessive pore water pressure was larger than in the case of the settlement.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.381-384
• /
• 2002

In speech signal processing, it Is very important to detect the pitch exactly in speech recognition, synthesis and analysis. but, it is very difficult to pitch detection from speech signal because of formant and transition amplitude affect. therefore, in this paper, we proposed a pitch detection using the spectrum flattening techniques. Spectrum flattening is to eliminate the formant and transition amplitude affect. In time domain, positive center clipping is process in order to emphasize pitch period with a glottal component of removed vocal tract characteristic. And rough formant envelope is computed through peak-fitting spectrum of original speech signal in frequency domain. As a results, well get the flattened harmonics waveform with the algebra difference between spectrum of original speech signal and smoothed formant envelope. After all, we obtain residual signal which is removed vocal tract element The performance was compared with LPC and Cepstrum, ACF 0wing to this algorithm, we have obtained the pitch information improved the accuracy of pitch detection and gross error rate is reduced in voice speech region and in transition region of changing the phoneme.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.131-138
• /
• 2000

This paper works on development of an algorithm for mapping of cerebral perfusion parameters using the gamma-variate curve fitting. The signal intensity variate curve according to time measured in each pixel of perfusion MRI is nonlinear, and various hemodynamic parameters are not computed accurately. Levenberg-Marquardt algorithm(LMA), nonlinear optimum algorithm with high convergent speed and stability, is used to compute them. That is, the signal intensity variate curve is fitted by the gamma-variate function. Various hemodynamic parameters - Cerebral Blood Volume(C.B.V), Mean Transit Time(M.T.T), Cerebral Blood Flow(C.B.F), Time-to-Peak(T.T.P), Bolus Arrival Time(B.A.T), Maximum Slope(M.S) - are computed using LMA.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.86-90
• /
• 2006

We prosed a distributed fiber-optic sensor system with 10 fiber Bragg gratings, for over temperature protection relay in power systems. We applied Gaussian line-fitting algorithm to compensate the distortion effects in the wavelength-scanned Farby-Perot filter demodulation scheme. Compared with the highest-peak-detection method, the proposed algorithm was proved to minimize the random errors of distorted PD profiles. From experimental results, the overall measurement error was within 1 % compared with the reference thermocouple and the linearity error was less than 0.37 %.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.192-200
• /
• 2021

In the mid of the December 2019, the virus has been started to spread from China namely Corona virus. It causes fatalities globally and WHO has been declared as pandemic in the whole world. There are different methods which can fit such types of values which obtain peak and get flattened by the time. The main aim of the paper is to find the best or nearly appropriate modeling of such data. The three different models has been deployed for the fitting of the data of Coronavirus confirmed patients in Pakistan till the date of 20^th November 2020. In this paper, we have conducted analysis based on data obtained from National Institute of Health (NIH) Islamabad and produced a forecast of COVID-19 confirmed cases as well as the number of deaths and recoveries in Pakistan using the Logistic model, Gompertz model and Auto-Regressive Integrated Moving Average Model (ARIMA) model. The fitted models revealed high exponential growth in the number of confirmed cases, deaths and recoveries in Pakistan.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.168-174
• /
• 1993

A new digital image processing method for measuring of the flank wear of cutting tool is presented. The method is based on computer vision technology in which the tool is illuminated by two halogen lamps and the wear zone is visualized using a CCD camera. The image is converted into digital pixel and processed to detect the wearland width. As a conclusion, it has been proved that the average wearland area and mzximum peak values of the flank wear width can monitored effectively to a measuring resolution of 0.01mm.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.13-29
• /
• 2001

주기적으로 변하는 압력이 loose 또는 tight fitting 상태의 콘택트렌즈와 같은 diaphragm에 작용하여 진동이 발생하는 경우 diaphragm의 가장자리(edge)는 단순지지(simply supported) 또는 고정(rigidly clamped) 상태로 가정할 수 있으며, 이러한 가정하에 diaphragm의 진동을 해석할 수 있는 미분방정식과 그 해를 구하는 컴퓨터 프로그램을 작성하였으며 이 컴퓨터 모델을 사용하여 진폭 및 출력을 예측하고 diaphragm의 반경 및 두께, damping, 작용하는 압력의 진동수 등 제반 변수가 진동에 미치는 영향을 모사하였다. 외부 압력의 진동수가 어떤 범위 이상에서는 diaphragm의 파형은 한 개의 peak를 가지는 원호형에서 2개의 peak를 가지는 파도형으로 전환되며 이 때 진동수가 증가함에 따라 diaphragm의 바깥 부분의 peak가 안쪽 peak보다 높아지는 것을 알 수 있다. 이러한 경향이 시작되는 진동수는 diaphragm의 가장자리가 단순지지된 경우가 clamped 된 경우보다 훨씬 낮다. 단순지지된 diaphragm의 진동은 고정단 진동에 비하여 기본 공진(fundamental resonance)이 월등히 낮은 진동수에서 발생하며, 따라서 저주파 영역에서는 진동수가 낮아질수록 두 진동간의 진폭차가 커지지만 고주파 영역에서는 그 차이가 미미하게 된다. 또한 단순지지 diaphragm의 진동의 특징은 진동수의 증가에 따라 여러개의 공진(harmonics)이 발생하지만 전체적으로 진폭은 급격하게 감소한다. 그러나 저주파 영역에서 단순지지 진동의 진폭이 크다고 해도 출력은 낮기 때문에 diaphragm의 진동에 따른 출력(power)은 특정 진동수에서 하나의 주 peak를 갖는다. 단순지지된 diaphragm이 진동할 때 diaphragm의 출력 공진진동수는 두께가 증가할수록 감소한다. 이 경우 형성되는 harmonics의 출력은 기본공진의 강도에 비해 현저하게 떨어지는 것이 진폭의 경우와 대조적이다.