• 제목/요약/키워드: peak discharge

검색결과 624건 처리시간 0.026초

4단 압연기용 작업롤의 표면조도가공 특성과 판면조도 변화에 관한 연구 (A Study on the Texturing Characteristics of Work Roll and Variation of Strip Surface Roughness in 4-Hi Mill)

  • 김문경;전언찬;김순경
    • 한국정밀공학회지
    • /
    • 제13권7호
    • /
    • pp.167-175
    • /
    • 1996
  • Work roll wear in the cold rolling of steel strip is strongly affected by rolling materials, rolling conditions and lubrication. Tests were performed to find the effects of rolling materials under the same lubricating conditions. Surface roughness of cold rolled steel strip as well as the coating technique itself is quite improtant in obtaining high image clarity of electronic products and car outer panels. Therefore this paper reviews for improvement of roughness and peak count about the surface of Cr coated work roll is investigated from the actual temper mill. The conclusions were obtained as follows; 1) Work roll wear in the cold rolling of steel strip is strongly affected by carbon contents of rolling materials, but there is not a separating force and total reduction ratio. 2) The roughness of strip surface is larger in the direction of width than in roll direction. 3) The electro-discharge textured roll has more uniform roughness distribu- tion than shot blasted roll and it's life time is two times longer than shot blasted because it has more harmonic wave roughness, and the higher peak count of surface roughness. 4) The life time of Cr coated work roll is 2 times longer than that of shot blasted work roll and variation of peak count, roughness and life time of Cr coated work roll is similar to electro-discharge texturing work roll. 5) The proper Cr coating thickness is 10 .mu. m at the work roll of temper mill.

  • PDF

CMM 데이터로부터 방전조건 결정 (Determination of EDM Parameters from CMM Data)

  • 주상윤
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1998년도 춘계학술대회 논문집
    • /
    • pp.35-39
    • /
    • 1998
  • Determination of effective EDM parameters is significant to increase productivity. However, With the complexity of EDM phenomena, a universal selection method of EDM parameters has not been established yet. Moreover, No attempt has been tried before to suggest a logical method in determining essential machining parameters for effective electrical discharge machining. Peak current, one of the most significant factors in EDM, is proportional to EDM area. This paper presents a method that can be Z-map modeling from CMM data, and calculate EDM area using Z-map.

  • PDF

SWMM 분석을 통한 투수성 포장의 유출 저감 특성 평가 (Performance Evaluation of the Runoff Reduction with Permeable Pavements using the SWMM Model)

  • 임무광;류성우;박대근;이재훈;조윤호
    • 한국도로학회논문집
    • /
    • 제17권4호
    • /
    • pp.11-18
    • /
    • 2015
  • PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

유역(流域)의 지상인자(地上因子)를 이용(利用)한 홍수량(洪水量) 해석(解析) (Analysis of the Direct Runoff by Using the Geomorpologic Parameters of Watersheds)

  • 서승덕;이승욱
    • Current Research on Agriculture and Life Sciences
    • /
    • 제7권
    • /
    • pp.55-66
    • /
    • 1989
  • 낙동강수계중(洛東江水系中)의 3개(個) 중대(中大) 유역(流域)인 안동댐 유역(流域)($1612.8km^2$), 임하유역($1964.8km^2$), 선산($979.3km^2$)을 대상(對象)으로 Horton과 Strahler의 하천차수법칙(河川次數法則)에 의해 하천(河川)을 분류(分類)하고, 1 : 50,000 지형도(地形圖)를 이용(利用)하여 각(各) 하천차수별(河川次數別) 지상인자(地相因子)를 구(求)하여 이들 지상인자(地相因子)들에 의해 Markov확률과정(確率過程)을 도입(導入)해서 구(求)한 순간단위도(瞬間單位圖)를 이용(利用)한 방법(方法)과 SCS무차원단위도법(無次元單位圖法)에 의해 홍수량(洪水量)을 구(求)한 결과(結果)를 요약하면 다음과 같다. 1. 대상유역(對象流域)에서 Horton의 하천분류법(河川分流法)에 따른 지상인자(地相因子)들의 유역특성(流域特性)인 분기비(分岐比), 길이비(比), 면적비(面積比)는 각각 3.6~5.5, 1.8~3.8, 5.1~6.4의 범위(範圍)로써 Horton이 제안(提案)한 값과 거의 일치(一致)하였다. 2. Markov 확률과정(確率科程)을 이용(利用)한 순간단위도(瞬間單位圖)에서 홍수량(洪水量)은 0~7%, 홍수도달시간(洪水到達時間)은 0~2시간(時間)의 오차로 양호한 값이 나타난데 반하여, SCS무차원단위법(無次元單位法)으로 구(求)한 홍수량(洪水量)은 10~40%, 홍수도달시간(洪水到達時間)은 0~4시간(時間)의 비교적 큰 오차가 나타났다.

  • PDF

한국에 있어서 제수문구조물의 설계의 기준을 주기 위한 수문학적 연구(류거, 홍수 편) (The furulamelllal study in order to obtain the hydrological design basis for hydrological structures in Korea (Run ofl estimate and Flood part))

  • 박성우
    • 한국농공학회지
    • /
    • 제8권1호
    • /
    • pp.1011-1034
    • /
    • 1966
  • This thesis is the final report which has long been studied by the author to obtain the design basis for various hydrological constructions with the specific system suitable to the natural environmental conditions in Korea. This report is divided into two parts: one is to estimate runoff volume from watersheds and the other to estimate the peak discharge for a single storm. According to the result of observed runoff record from watersheds, it is known that Kajiyama formula is useful instrument in estimating runoff volume from watersheds in this country. But it has been found that this formula shows us 20-30% less than the actual flow. Therefore, when wihed to bring a better result, the watershed characteristics coefficient in this formula, that is, f-value, should be corrected to 0.5-0.8. As for the method to estimate peak discharge from drainage basin, the author proposes to classify it in two ways; one is small size watershed and the other large size watershed. The maximum -flood discharge rate $Q_p$ and time to peak Pt obtained from the observed record on the small size watershed are compared by various methods and formulas which are based upon the modern hydrological knowledge. But it was fou.d that it. was not a satisfied result. Therefore, the author proposes. tocomputate $Q_p$, to present 4.0-5.0% for the total runoff volume ${\Sigma}Q$.${\Sigma}Q$ is computed under the assumption of 30mm 103s in watershed per day and to change the theoritical total flow volume to one hour dura tion total flow rate when design daily storm is given. Time to peak Pt is derived from three parameters which are u,w,k. These are computed by relationship between total runoff volume (ha-m unit)and $Q_p$. (C.M.S. unit). Finally, the author checked out these results obtained from 51 hydrographs and got a satisfied result. Therefore the author suggested the model of design dimensionless unit-hydrograph. And the author believes that this model will be much available at none runoff record river site. In the large size watersheds in Korea when the maximum discharge occurs, the effective rainfall is two consequtive stormy days. So the loss in watershed was assutned as 6Omm/2days,and the author proposed 3-hour-daration hydrograph flow distribution percentage. This distribution percentage will be sure to form the hydrograph coordinate.

  • PDF

레이더 자료의 강우보정 및 Vflo를 활용한 도심하천의 홍수량 산정 (Rainfall Correction of Radar Image Data and Estimation Runoff of Urban Stream using Vflo)

  • 강보성;양성기;김용석
    • 한국환경과학회지
    • /
    • 제26권4호
    • /
    • pp.411-420
    • /
    • 2017
  • This research aims at comparing the accuracy of flood discharge estimation. For this, we focused on the Oedo watershed of Jeju Island and compared flood discharge by analyzing the values as follows: (1) the concentration of the lumped model (HEC-HMS) and distributed model (Vflo), and (2) the in-situ data using Fixed Surface Image Velocimetry (FSIV). The flood discharge estimation from the HEC-HMS model is slightly larger than the Vflo model results. This result shows that the estimations of the HEC-HMS are larger than the flood discharge data by 4.43 to 36.24% and that of the Vflo are larger by 8.49 to 11%. In terms of the error analysis at the peak discharge occurrence time of each mapping, HEC-HMS is one hour later than the measured data, but Vflo is almost the same as the measured data.

원격감시 기능을 갖는 고감도 부분방전센서 (Highly Sensitive Partial Discharge Sensor with Remote Monitoring Capabilities)

  • 최규남
    • 한국전자통신학회논문지
    • /
    • 제10권3호
    • /
    • pp.349-356
    • /
    • 2015
  • 광학적 잡음과 전기적 잡음을 복합적으로 제거할 수 있는 하이브리드 필터를 채용하고 펄스형태의 아크 광 신호를 적분하여 수신되는 아크에너지의 크기로 감지할 수 있는 원격감시 기능을 갖는 고감도 부분방전 센서를 구현하였다. 하이브리드 필터는 부분방전 센서가 설치되는 배전반 내 환경에서 내부 형광등과 백열등 조명에 대하여 영향을 받지 않음을 보여주었다. 종래에는 아크광의 불규칙한 파형특성으로 인하여 첨두치가 감지되어 아크광의 크기에 비례한 선택적 감지가 어려웠으나, 센서에 적용된 적분연산 기능은 각기 다른 아크광의 에너지 레벨에 대하여도 선택적으로 감지가 가능함을 실험적으로 보여주었다. 센서는 2m 이격된 원격지에서 100A 저압 MCCB의 정상 개폐 시 발생하는 섬광에 해당하는 광 에너지에 대해서도 감지가 가능함을 보여주어 원격감시 기능을 갖는 고감도 부분방전센서에 적용 가능함을 보여주었다.

하천오염인자의 통계적 특성 (Statistical Characteristics of Pollutants in Sterm Flow)

  • 황임구;윤태훈
    • 물과 미래
    • /
    • 제14권4호
    • /
    • pp.19-26
    • /
    • 1981
  • 자연하천에서의 수질은 유량의 변화에 많은 영향을 받을 것으로 기대되는 바, 유량과 각 수질인자의 통계적 특성 및 유량변화와 수질인자간의 상관관계를 조사하기 위하여 자기 및 상호상관함수 power spectrum, coherence 함수 및 Markov 모형을 적용하였다. 일부 자료만이 입수 가능한 한강 하류부 인도교 지점에서의 유량, 용존산소, 전기전도도는 명백한 1년 주기와 6, 4, 3개월의 약한 주기를 가지며, 유량과 용존산소, 유량과 전도도 사이의 상관은 약하게 나타났고 상호상관함수에서 첨두가 지체 1일에서 발생하여 미약하지만 유량의 변화에 의한 영향이 1일 정도 차이로 수질인자에게 미치는 것으로 해석된다. 계열 발생 및 예측수단인 선형회귀모형의 검토에서 유량은 1차 및 2차 Markov 모형과, 용존산소와 전도도는 1차 Markov 모형과 흡사하게 나타났다.

  • PDF

로터리 압축기의 토출밸브의 미소 거동 및 유동 특성에 대한 FSI(Fluid-Structure Interaction) 기법을 이용한 수치해석 (A Numerical Analysis with the FSI Mode on the Characteristics of Flow Field and Discharge Valve Motion in a Rotary Compressor)

  • 채희문;김창녕;박성관
    • 한국정밀공학회지
    • /
    • 제25권5호
    • /
    • pp.112-120
    • /
    • 2008
  • This study has been conducted to investigate the characteristics of flow field and discharge valve motion in a rotary compressor. In this study, a transient three-dimensional numerical analysis using FSI(Fluid-Structure Interaction) model has been employed to analyze the interaction between the discharge valve and the refrigerants in the rotary compressor. It has been observed that two peaks have appeared in the displacement of the discharge valve. The maximum displacement of the discharge valve has been found to be located at the second peak. Also, the input pressure of the refrigerants has been compared with the pressures of the muffler passage and the compressor outlet in the rotary compressor. The pressure has decreased along the pathway in the rotary compressor. And the volume flow rates obtained from the current numerical study have been compared with the experiment at data to verify the validity of the present numerical study. This study may supply the fundamental data for the design of rotary compressors.

전기요금 절감용 ESS를 활용한 Particle Swarm Optimization 기반 Peak Shaving 제어 방법 (Particle Swarm Optimization-Based Peak Shaving Scheme Using ESS for Reducing Electricity Tariff)

  • 박명우;강모세;윤용운;홍선리;배국열;백종복
    • 전기전자학회논문지
    • /
    • 제25권2호
    • /
    • pp.388-398
    • /
    • 2021
  • 본 논문에서는 전기요금 절감용 ESS를 활용한 Particle swarm optimization(PSO) 기반 Peak shaving 제어 방법을 제안한다. 제안한 방식은 실제 부하와 예상되는 부하의 소비를 비교하여 피크 절감을 위해 ESS의 추가 유효전력값을 계산하여 입력을 더한다. 또한 추가로 증가시킨 유효전력을 보상하기 위해, 유효전력을 할당하는 과정을 수행하며 유효전력 할당치가 피크 부하에 영향을 주지 않도록 유효전력 할당 지점에 예상되는 부하의 평균을 최소화하는 최적화 해를 PSO를 통해 찾는다. 제안한 방식의 성능 검증을 위해 실제 부하 데이터와 예측 알고리즘을 반영하여 예측 오차가 적은 경우와 큰 경우의 사례 연구를 수행하였다. 사례 연구 수행 결과 제안한 방식을 전기요금 절감을 위한 충·방전 제어 방식과 같이 수행한 경우 예측 오차가 큰 경우에도 성공적으로 피크 부하 절감을 수행하였으며, 17.8%의 피크 부하 절감 효과와 6.02%의 전기요금 절감 효과를 보였다.