• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 추계 학술논문발표회 논문집
• /
• pp.281-285
• /
• 2002

Although DC ground resistance is a good index of performance for a grounding system, it does not reflect the grounding performance during the transient states. Besides, impulse ground impedance, which is defined by a ratio of the peak value of transient ground potential rise to the peak value of impulse current, cannot be an absolute performance index due to its dependence on impulse current shape. In this paper, a grounding performance of needle-typed ground rod has been compared with simple ground rod using HIFREQ[1], which is an engineering electro-magnetic code based on MoM (Method of Moment).

• 한국안전학회지
• /
• 제16권4호
• /
• pp.7-13
• /
• 2001

Wire electrical discharge machining experiments in conducted to investigate characteristics of acoustic emission (AE) and electrical discharge energy due to current peak (I$_{p}$), pulse on time($\tau$/on/). The AE signals are obtained with a sensor attached to workpiece side. Machining states are identified with scanning electron microscopy and residual stress analyzer. It is demonstrated that the residual stress provide reliable informations about the machining states. Moreover, machining states can be detected successfully using both the residual stress and AE count rate.e.

• 전기의세계
• /
• 제30권8호
• /
• pp.517-524
• /
• 1981

Thermally stimulated currents have been obtained from five kinds of polymer electrets. The peak current (I$_{m}$) and the peak temperature (T$_{m}$) of the TSC, particularly at PET thermoelectret, were found to depend on the forming field and the forming temperature. From these experimental results, the TSC spectra can be easily explained by the consideration of the disorientation of dipoles related with glass transition temperature. The obtained results can suggest that the forming field and the forming temperature plays an essential role for charge stability in PET thermoelectrets.ets.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.550-551
• /
• 2014

A discrete time domain modeling and analysis for the peak current controlled (PCC) buck LED driver is presented in this paper. The design guidelines and experimental results for the PCC buck LED driver are presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.132-135
• /
• 2000

This paper present the results of measured Thermally Stimulated Current of EPR(Ethylene Propylene Rubber) sheet material with variation of bias temperature range of -35~80[$^{\circ}C$], the quality of the material of electrode, condition. The origins of these peaks are that, low temperature peak seems to result from dipole, and high temperature peak from the orientation electronic trap.

• 비파괴검사학회지
• /
• 제35권5호
• /
• pp.291-298
• /
• 2015

본 논문에서는 외부에서의 탐촉자 스캐닝이 어려운 금속배관의 긴 축방향 결함이나 두께감육 등과 관련된 건전성을 감시하기 위하여 펄스와전류 신호의 피크치와 피크(발생)시간을 이용하는 배열형 탐촉자를 제안하였다. 탐촉자는 관을 따라 외삽형 코일들을 배열하고, 금속배관의 상태를 반영하는 자계는 와전류에 의해 생성되는 자계이므로 원천자계가 직접적으로 센서신호에 영향을 미치는 것을 막기 위하여 코일의 외부를 페라이트로 차폐하였다. 여자코일과 센서코일은 자동적으로 연속해서 위치를 이동하게 되므로 사람이 직접 탐촉자를 주사할 필요는 없다. 두 코일의 위치가 고정되어 있을 때 센서에서 감지되는 펄스와전류 신호에서 피크치와 피크시간을 추출하고, 모든 위치에서 추출되는 이 데이터들을 축적하여 배열형 피크치 신호와 배열형 피크시간 신호를 생성하였다. 수치 모사는 시간영역은 후향차분법으로, 공간은 유한요소법을 사용하여 수행되었다. 모사 결과는 결함의 깊이나 길이가 증가함에 따라 펄스와전류 신호에서 피크치가 증가하며 피크는 더 일찍 나타난다는 것을 보여 주었으며, 이를 활용하여 본 연구에서 제안한 배열신호들은 배열형 탐촉자 내부에서 결함의 깊이나 길이 변화뿐만 아니라 결함의 위치를 반영하는데에도 탁월함을 증명하였다.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.586-592
• /
• 2016

The current control of Continuous Conduction Mode(CCM) can be implemented by several methods: peak current control; average current control; and hysteresis control. Among these methods, the hysteresis current control is popularly applied in various converter applications because of its simplicity of implementation, fast current control response and inherent peak current limiting capability. However, a current controller with conventional hysteresis band which multiplies the current reference has the disadvantage that the modulation frequency varies in one cycle of the input voltage and, as a result, generates high switching frequency in the low input voltage section. Also it is complicated to design the input filter due to varying switching frequency. This paper proposed an optimum hysteresis-band current control method where the band is generated by using both multiplication method and sum method to maintain the modulation frequency to be nearly constant. This approach can solve the high switching frequency in the low input voltage section, and achieve easy design of input filter. The performance of the proposed converter is verified with the simulation and the experimental works.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.157-163
• /
• 2008

다상 교호 컨버터에서 인덕턴스가 불일치 할 때 첨두전류 제어기를 사용하는 경우에 각 상의 평균 전류는 동일하지 않다. 본 논문에서는 각 상의 인덕턴스가 불일치한 경우에 첨두전류 모드에서 평균전류가 동일해지는 전류분배 제어기를 제안한다 제어기는 과도상태에서도 전류의 평형이 잘 이루어질 수 있도록 설계한다. 제안된 방법을 2상과 4상 교호 승압컨버터에 적용시켰으며, 실험 결과를 통해 인덕턴스가 불일치한 경우에도 첨두전류 모드에서 전류평형이 잘 이루어짐을 보인다.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.328-333
• /
• 2010

A photovoltaic power conditioning system (PV PCS) that contains single-phase dc/ac inverters tends to draw an ac ripple current at twice the output frequency. Such a ripple current perturbs the operating points of solar cells continuously and it may reduce the efficiency of the current based maximum power point tracking technique (CMPPT). In this paper, the ripple current generation in a dc link and boost inductor is analyzed using the ac equivalent circuit of a dc/dc boost converter. A new feed-forward ripple current compensation method to incorporate a current control loop into a dc/dc converter for ripple reduction is proposed. The proposed feed-forward compensation method is verified by simulation and experimental results. These results show a 41.8 % reduction in the peak-to peak ac ripple. In addition, the dc/ac inverter control system uses an automatic voltage regulation (AVR) function to mitigate the ac ripple voltage effect in the dc link. A 3kW PV PCS prototype has been built and its experimental results are given to verify the effectiveness of the proposed method.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권7호
• /
• pp.317-323
• /
• 2001

We investigated the stability of cryocooler-cooled high-temperature superconducting (HTS) coils by using a computer program based on FEM. In this study, the current at which "thermal runaway" occurs, which depends on the relationship between the cooling power of the cryocooler and the heat generation in HTS coils, was adopted as a stability criterion of cryocooler operating HTS coils. It was shown that cryocooler-cooled HTS coil was stable in operating current above the critical current from the numerical analysis results by HTS model coil. And also, if we efficiently remove the heat generation from HTS coils by potimizing heat drain, the ramp-rate limitation can be mitigated because the effect of AC loss by the current rise was too small. Furthermore, in the case of pulsed operation; the HTS model coil is ramped from zero to the peak value in one second and back to zero current in one second, such as the operation of SMES device, the peak value of poerating current is 1.5-2 times greater than that of the thermal runaway current.