• The Korean Journal of Physiology
• /
• v.15 no.2
• /
• pp.103-109
• /
• 1981

In order to determine the dose-response relationship of ethanol on blood pressure and renal function, 2 doses of ethanol were intubated into albino rats. For a direct measurement of arterial blood pressure, a polyethylene catheter(PE 10) was implanted in the abdominal aorta, and the other end of the catheter was pulled out of the back of the neck. The experiment was conducted after the rats recovered from the surgery. After emptying their bladders, the rats were placed in a metabolism cage. Mean arterial pressure (MAP) was measured and arterial blood samples were collected through the catheter. Following the collection of the control urine sample, 1 ml of 10 g% (low dose), or 30 g% (high dose) of ethanol/100 g BW was intubated. 1 ml of water/100 g BW was intubated into the control group. MAP and blood samples were taken every hour, and urine samples were collected every 90 min for 3 hours. Blood alcohol concentrations reached a peak at 1 hour (low dose: $105.0{\pm}7.5$, high dose: $214.7{\pm}20.2\;mg%$) and decreased linearly thereafter. Following alcohol ingestion, MAP began to decrease at 15 min and remained at a significantly low level thoughout the 3 hours experimental period(low dose: $112{\pm}2{\rightarrow}102{\pm}4$, high dose: $117{\pm}2{\rightarrow}100{\pm}8\;mmHg$). Urine Flow increased markedly during the first 90 min of ethanol ingestion (low dose: $0.88{\pm}0.20{\rightarrow}1.04{\pm}0.22$, high dose: $0.56{\pm}0.11{\rightarrow}1.35{\pm}0.18\;ml/1.5\;hr$) and decreased during the second 90 min period(low dose: $0.25{\pm}0.06$, high dose: $0.22{\pm}0.06\;ml/1.5\;hr$). Urine flow of the control group decreased gradually during the experiment $(0.88{\pm}0.10{\longrightarrow}0.59{\pm}0.09{\rightarrow}0.45{\pm}0.09\;ml/1.5\;hr)$. These results indicate that the blood-pressure-lowering and diuretic effects of ethanol are dose-related: higher doses of ethanol produce a greater decrease in blood pressure and greater diuresis.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.309-325
• /
• 2004

The Cannington Ag-Pb-Zn deposit, northwest Queensland, Australia developed around the host rocks composing banded and migmatitic gneisses, sillimanite-garnet schist and amphibolite. Three crystal habits of sillimanite, gahnite (Zn-spinel) and garnet porphyroblasts occurred on the host rocks of the Cannington deposit could be used to delineate metamorphism that closely associated with Zn-mineralization in the deposit. Linkages the metamorphism to Zinc-mineralization is determined in four chemical systems, KFMASH (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$), KFMASHTO (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$-TiO$_2$-Fe$_2$O$_3$), NCKFMASH (Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$) and MnNCK-FMASH (MnO-Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$), using THERMOCALC program (version 3.1; Powell and Holland 1988). Partial melting in MnNCKFMASH and NCKFMASH systems occurs at lower temperature than in the KFMASH and KFMASHTO systems. The partial melting temperature decreases with increasing of Na/(Na+Ca+K) of the bulk rock compositions in the MnNCKFMASH system. The host rocks have melted ca 15 vol.% in the MnNCKFMASH system at peak metamorphic conditions (634$\pm$62$^{\circ}C$ and 4.8$\pm$1.3 kbar), but partial melting have not occurred in KFMASHTO system. Based on calculations of sillimanite isograd in different systems and sillimanite modal pro-portion, prismatic and rhombic sillimanite and gahnite porphyroblasts including prismatic sillimanite inclusion probably have resulted from pressure and temperature increasing through partial melting (from 550～$600^{\circ}C$, 2.0～3.0 kbar to 700～75$0^{\circ}C$, 5.0～7.0 kbar), furthermore have experienced N-S then W-E crustal shortening during D$_1$ and D$_2$ deformation. Consequently, Zinc mineralization related to gahnite growth occurred during D$_2$ and was redistributed and upgraded by partial melting and retrograde metamorphism into structural and rheological sites during shearing in D$_3$.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.6
• /
• pp.610-620
• /
• 2003

Background : 3p deletion has been shown to be the most frequently occurring change in lung cancers, suggesting the presence of a tumor suppressor gene in this region. Recent attention has focused on a candidate 3p14.2 tumor suppressor gene, FHIT. Therefore, the association of the expression of FHIT, with apoptosis, cell proliferation cycle and the clinicopathological features, including survival, were investigated Materials and Methods : 83 patients with non-small cell lung cancer, who underwent curative operation, between Jan. 1996 and Aug. 2000, at the Wonkwang university hospital, were analyzed. The expression of the FHIT was identified by immunohistochemical staining, and rate of apoptosis and cell proliferation cycle by flow cytometry. Results : 43% (36/83) of patients exhibited no FHIT expression. The rates of FHIT loss were 52% (28/54), 22% (5/23), 50% (3/6); 30% (11/37), 48% (16/33), 69% (9/13); 54% (30/56) and 22% (6/27), in squamous cell cancers, adenocarcinomas, large cell cancers, TNM stages I, II and III, smokers and non-smokers, respectively. All the differences in FHIT loss rates, according to the histopathology, TNM stages and smoking habits, were statistically significant. The median survival time and 2-year survival rate of the FHIT(-) group were 24 months and 44%, and those of the FHIT(+) group were 25 months and 51% (p>0.05), respectively. The apoptotic rate of the FHIT(-) and FHIT(+) groups were 50.72 (${\pm}13.93$) and 59.38 (${\pm}14.33$)%, respectively (p=0.01). The S- and G1-phase fractions of the FHIT(-) and FHIT(+) groups were 13.93 (${\pm}7.35$) and $51.50({\pm}23.15$)% and 15.65(${\pm}6.59$) and 54.16 (${\pm}20.25$)%, respectively (p>0.05). Conclusion : The loss of FHIT expression was increased to a greater extent with advancing TNM stage, smoking habits and squamous cell cancer compared to the adenocarcinomas. However, no survival differences were found according to the expression of FHIT. The apoptotic rate of the FHIT(+) group was greater than in the FHIT(-) group, but differences in the S- and G1-phase fractions, according to the expression of the FHIT, were not found.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.55-61
• /
• 2009

Recently, the number of high-rise buildings being built in Korea by major construction companies for residential and commercial use has been increasing. When constructing a high-rise building, it is necessary to apply massive amounts of concrete to form a mat foundation that can withstand the huge load of the upper structure. However, it is of increasing concern that due to limitations in terms of the amount of placing equipment, available job-sites and systems for mass concrete placement in the construction field, it is not always possible to place a great quantity of concrete simultaneously in a large-scale mat foundation, and for this reason consistency between placement lift cannot be secured. In addition, a mat foundation Is likely to crack due to the stress caused by differences inhydration heat generation time. To derive a solution for these problems, this study provides test results of a hydration heat crack reduction method by applying placement lift change and setting time control with a super retarding agent for mass concrete in a large-scale mat foundation. Mock-up specimens with different mixtures and placement liftswere prepared at the job-site of a newly-constructed high-rise building. The test results show that slump flow of concrete before and after adding the super retarding agent somewhat Increases as the target retarding time gets longer, while the air content shows no great difference. The setting time was observed to be retarded as the target retarding time gets longer. As the target retarding time gets longer, compressive strength appears to be decreased at an early stage, but as time goes by, compressive strength gets higher, and the compressive strength at 28 days becomes equal or higher to that of plain concrete without a super retarding agent. For the effect of placement lift change and super retarding agent on the reduction of hydration heat, the application of 2 and 4 placement lifts and a super retarding agent makes it possible to secure consistency and reduce temperature difference between placement lifts, while also extending the time to reach peak temperature. This implies that the possibility of thermal crack induced by hydration heat is reduced. The best results are shown in the case of applying 4 placement lifts.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.559-567
• /
• 2010

This study was conducted to investigate the hydrological characteristics of groundwater level change and rainfall hydrological runoff processes caused by tunnel construction at Milbot bog located in Mt. Cheonseong. Data were collected from July 2004 to May 2008. The results were summarized as follows: The occurrence time of the direct runoff caused by unit rainfall at the Milbot bog were tended to be slower than those at general mountainous basin. Also, runoff did not sensitively respond to amount of rainfall at the most of the long and short term hydrograph. The annual runoff rates from 2004 to 2008 were 0.26, 0.13, 0.16, 0.25 and 0.27, respectively, slightly increased after 2005 regardless of the tunnel construction. Thus, the function of Milbot bog will be weakened, and it supposed to be changed to land in the future because of increasing annual runoff. The annual runoff rate for 4 years was 0.19, which is greatly lower than that of general mountainous basin. The recession coefficient of the direct runoff in short term hydrograph was ranged to 0.89~0.97, which is much larger than that of the general mountainous basin, 0.2~0.8. The recession coefficient of base flow ranged from 0.93 to 0.99, which are similar to general mountainous watershed's values. Groundwater level of Milbot bog increased or decreased in proportion to rainfall intensity, and in the descending time after the groundwater level was reached at peak point, it tends to be decreased very slowly. Also, groundwater level increased or decreased maintaining relatively high value after precedent rainfall. Groundwater level was highest during summer with heavy rainfall, but was lowest during winter. Average groundwater levels decreased annually from 2004 to 2008, -8.48 cm, -14.60 cm, -20.46 cm, -20.11 cm, -28.59 cm, respectively. Therefore, it seems that the Milbot bog is becoming dry and losing its function as a bog.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1336-1342
• /
• 2017

The study examined and compared the physicochemical and characteristics of various rice brand varieties and private brand products on the market. The moisture content in the proximate composition of rice was 15.67~17.03%, crude protein content was 5.73~6.30%, crude lipid content was 0.38~0.95%, and crude ash content was 0.23~0.56 %. Ilmi and Ilpum had high moisture content, whereas Gosihikkari and Hopyeong had high crude protein content. In the Hunter's color value of rice flour, L value was 96.76~97.27, a value was -1.63~-0.63, and b value was 2.00~2.60. The WAI was 1.21~1.39, WSI was 0.63~0.93%, and amylose content was 14.63~20.86%, respectively; Gosihikkari and Ilmi showed the lowest values. The X-ray diffraction patterns of rice flours of all varieties showed an A shape. For the amylogram properties of rice flour, initial pasting temperature was $59.57{\sim}63.23^{\circ}C$, maximum viscosity was 569.00~718.67 B.U. (Brabender Units), breakdown was 303.00~423.67 B.U., and setback was 212.67~265.33 B.U.. For differential scanning calorimeter (DSC) of rice flour, onset temperature was $54.66{\sim}58.63^{\circ}C$, peak temperature was $65.87{\sim}68.14^{\circ}C$, end temperature was $73.37{\sim}75.54^{\circ}C$, and enthalpy was 1.98~2.95 cal/g. The rice varieties with high internal density and initial pasting temperature as well as low crude protein content, WAI, amylose content, and setback can be classified as good. Gosihikkari in Gyeonggi Province, Ilmi and Hopyeong in Jeollanam-do, and Samgwang in Chungcheongnam-do are among them.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.397-402
• /
• 2005

In the Korean seas, Sea Surface Temperature (SST) and Thermal Fronts (TF) were analyzed temporally and spatially during 8 years from 1993 to 2000 using NOAA/AVHRR MCSST As the result of EOF method applying SST, the variance of the 1st mode was 97.6%. It is suitable to explain SST conditions in the whole Korean seas. Time coefficients were shown annual variations and spatial distributions were shown the closer to the continent the higher SST variations like as annual amplitudes. The 2nd mode presented higher time coefficients of 1993, 94, and 95 than those of other years. Although the influence is a little, that tan explain EININO effort to the Korean seas. TF were detected by Sobel Edge Detection Method using gradient of SST. Consequently, TF were divided into 4 fronts; the Subpolar Front (SPF) dividing into the north and south part of the East sea , the Kuroshio Front (KF) in the East China Sea (ESC), the South Sea Coastal Front (SSCF) in the South sea, and the Tidal Front in the West sea. TF located in steep slope of submarine topography. The distributions of 1st mode in SST were bounded in the same place, and these results should be considered to influence of seasonal variations. To discover temporal and spatial variations of TF, SST gradient values were analyzed by EOF. The time coefficients fo the 1st mode (variance : 64.55%) showed distinctive annual variations and SPF, KF, and SSCF was significantly appeared in March. the spatial distributions of the 2nd mode showed contrast distribution, as SPF and SSCF had strong'-'value, where KF had strong'+'value. The time of'+'and'-'value was May and October, respectively. Time coefficients of the 3rd mode had 2 peaks per year and showed definite seasonal variations. SPF represented striking'+'value which time was March and October. That was result reflected time of the 1st and 2nd mode. We can suggest specific temporal and spatial variations of TF using EOF.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.100-114
• /
• 2018

Nationally designated Cultural Properties 'Scenic site No.12 Maisan Mountain, Jinan' designated areas and some protected areas, and taking into account the dynamics of naturalized plants causing problems, we will restore the original vegetation scenery of Mt. Maisan. The results of this study are as follows. A total of 76 families, 192 genera, 286 taxa, and inland and inhabited areas, 76 and 138 genera and 163 taxa were identified in the areas of Ammaibong. The total number of naturalized plants identified in this study area is 28 taxa total, which corresponds to 7.1% naturalization rate(NR) among the vascular plants of all 395 taxa, and the urbanization index(UI) corresponds to 8.4% of the 333 taxa of Korean naturalized plants. Ecosystem disturbance plants identified in the survey area were Ambrosia artemisiifolia 1 taxa. The naturalized plants controlled and managed by separate anthropogenic vegetation management within the designation and protection area of Maisan scenic place are three species of herbaceous Rumex acetosella, A. artemisiifolia and Festuca arundinacea. It was identified as a breed. Indigofera bungeana and F. arundinacea communities around the stairway and Amorpha fruticosa, I. bungeana, A. artemisiifolia and Amaranthus patulus of the top of Am-Maibong were selected as the first priority sites for exclusion of exotic species in Maisan area and target naturalized plants species to the Ammaibong peak. In addition, R. acetosella community around the temple was suggested to be removed first to preserve endemic species. For the restoration of vegetation, we suggest that Stephanandra incisa, Spiraea blumei, Weigela subsessilis, etc. should be planted after removal of I. bungeana, and F. arundinacea, C. lanceolata, Carex callitrichos var. nana.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.48-57
• /
• 2018

In this study, we conducted an analysis on the actual field materials and the ancient text of January 2017. First, Yuyin ShanFang is one of the famous garden in the Lingnan Region, and its total area is $1598m^2$. Wobin called the name 'Yuyin(餘蔭)' meaning the virtues of his ancestors. Second, if we analyze the poem written by Wobin, we can classify it as a phrase expressing the world beyond the future, a poem expressing the ideas of family and romantic ideas. Third, the space spread to the south around the shrine building in the middle of the site was largely a residential space, according to the analysis of the site's layout and spatial composition. Fourth, the spatial component of the hydronic acid is analyzed. The pavilion area is the Hanchwi-Pavilion, which is designated in the Wongrim, and Gyesang-Pavilion, which is a unique range that describes the peak of the garden. Fifth, Yuyin ShanFang has five ponds that are very diverse in shape. It is characteristic of us to stand on a technical boundary. Sixth, Seokgasan was referred to as Gyeongbansan, which was named after The builder Wobin and his descendants who passed it. Seventh, Hwachang is characterized by a wooden bull window and a compound glass. Eighth, the alumni style is not as diverse as the alumni style of the Suzhou traditional garden, but it features various forms and colorful pictures on the front of the alumni. Ninth, the one-piece sculptures of the interior of a building are expressed themes such as Gilsang, Sukjeong, Daoism, Palseom, and others. Finally, Trees planted in Yuyin ShanFang are mostly tropical plants, and some of them have symbolic meaning. Because the weather here is good for growing fruit, so planted a lot of fruit trees.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.