• Journal of Food Hygiene and Safety
• /
• v.24 no.4
• /
• pp.352-356
• /
• 2009

The purpose of this study was to introduce the toxicological study review to evaluate the safety of PDMS on the 69th JECFA meeting. Polydimethylsiloxane is a polymer and its ADI was established at 23rd JECFA meeting in 1979. The ADI was maintained although the specification was expanded at its 26th, 29 th, 37 th meetings. Recently, it was reported that PDMS with low molecular weight and viscosity has high absorption rate and different toxicity, so it was submitted at 69th meeting. Toxicological studies of PDMS were submitted from the sponsor and additional information is collected from a document searching. The toxicological studies were reviewed in accordance with the 'Guidelines for the preparation of toxicological working papers for the Joint FAO/WHO Expert Committee on Food Additives'. In the available acute, sub-chronic and chronic toxicity studies on PDMS, dose-related increases in incidence and severity of ocular lesions(corneal crystal, inflammation of the corneal epithelium etc.) were consistently observed after oral dosing. It seems to be a local irritant effect, but the mechanism by which the ocular lesions arose is unclear, although the lack of absorption of PDMS indicates that it is unlikely to be a direct systemic effect. Consequently, the relevance of the ocular lesions for food use of PDMS could not be determined. The ADI of PDMS was re-established from 0-1.5 mg/kg bw/day to 0-0.8 mg/kg bw/day by applying additional safety factor 2 based on its ocular toxicity. The result of 0-0.8 mg/kg bw/day is a temporary ADI until further data are provided to 2010.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.17-24
• /
• 2013

In order to have market competitiveness in local and global areas, Domestic Marine Leisure Industry business, which is a latecomer in the Marine Leisure industry, should retain a strong market adaptability by reducing time and cost that are required for work of planning, designing, and preparation for product development. To meet above requirements, it is essential that integrated system control extensive marine leisure industry. After ensuring integrated information by figuring out the systematic link between related-industries, the core of this research is to secure information classifications that are not just in the flow of simple serial order, but in that of integration and object-oriented information classifications. For this end, we examine other similar cases in industries using real information system applied to industrial production and Product Lifecycle Management (PLM), Product Data Management (PDM), Digital Manufacturing (DM) and applying the same methodology to review practical application in order to construct the information system, and Work Breakdown Structure (WBS), compared with the case studies. Through this basic task for the marine leisure industry classification system configuration (Work Breakdown Structure, WBS) and utilizing information of driving real companies of marine leisure industry, a unique area of MLWBS (Marine Leisure Work Breakdown Structure, MLWBS) is configured. This Marine Leisure Work Breakdown Structure can be used in various areas of applications like products, design information, engineering, production, purchasing, sales, marketing, AS, utilizing various forms of customer support.

• Journal of The Korean Association For Science Education
• /
• v.37 no.1
• /
• pp.143-154
• /
• 2017

Science inquiry has long been emphasized in Korean science education. Scientific modeling is one of key practices in science inquiry with a potential to provide students with opportunities to develop their own explanations and knowledge thereafter. The purpose of this study is to investigate teacher's understanding of models in science and science teaching. A professional development program on Models (PDM) was developed and refined through three times of implementation while teachers' conceptions of models and modeling were examined. A total of 29 elementary and secondary teachers participated in this study. A survey based on model use of scientists in the history of science was developed and used to collect data and audio recordings of discussions among teachers and artifacts produced by the teachers during PDM were also collected. Three ways of ontological and two ways of epistemological understanding of models and modeling were found in teachers' ideas. After PDM, a quarter of the teachers changed their ontological understanding whereas very few changed their epistemological understanding. In contrast, more than two thirds of the teachers deepened and extended their ideas about using models and modeling in teaching. There were no clear relationships between teachers' understanding of models and ways and ideas about using models in science teaching. However, teachers' perceptions of school conditions were found to mediate their intention to use models in science teaching. The findings indicate possible approaches to professional development program content design and further research.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.718-725
• /
• 1999

In order to investigate the interaction characteristics of poly(dimethylsiloxane) (PDMS) with various solvents such as water, ethanol, and iso-propanol, Inverse Gas Chromatography(IGC) at finite concentration, which is a very fast, accurate, and thus promising technique in thermodynamic study of polymer systems, is employed. By measuring the specific retention volumes of the probes, the interaction parameters are calculated by means of the Flory-Huggins equation. From the results, the interaction parameters of the probes are, as expected due to the hydrophobicity of the polymer, found to be of large positive values (2$2.0{\times}10^{-3}mol/g$. For the linear PDMS, interpretation of the space distribution of molecules is performed by the Kirkwood-Buff-Zimm(KBZ) integrals, which give intuitive information about physical properties. From the KBZ integrals, water does not show the tendency of preferential solvation with the PDMS but formed self-cluster. The larger solvent molecules show a stronger tendency to distribute more randomly in the mixture.

• Journal of Digital Contents Society
• /
• v.10 no.1
• /
• pp.147-157
• /
• 2009

Configuration and data management system to support processes for the weapon system should support the concurrent engineering and collaborative activities for various documents, drawings, part informations and structural informations, etc. which are produced through R&D processes for a long time. This thesis attempts to identify major functions in the configuration and data management system to support processes for the weapon system R&D into services based on a service oriented architecture. In order to identify major services in the configuration and data management system to support processes for the weapon system R&D, a configuration and data management system to support processes for the weapon system R&D was proposed with a service oriented architecture with four layers including a service consumer layer, a business service layer, an application service layer and a application layer, and major services were identified for each layer. In order to identify major services in four layers, this thesis adopted a bottom-up approach to identify the necessary business services from a well-defined domain implementation system rather than a top-down identification method in general. This thesis tried to identify the essential services in implementing the configuration and data management system to support processes for the weapon system R&D as a system based on the service oriented architecture using such a bottom-up service identification method while limiting those services to the general PDM system aspects and the business areas of the configuration and data management system to support processes for the weapon system R&D.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.815-820
• /
• 2016

An elastic polymer (e.g., PDMS) blended with EFG particles is a promising conductive composite for fabricating soft sensors that can detect an object's deformation up to or more than 50%. Here, we develop large-strain, sprayable soft sensors using a mixture of PDMS and EFG particles, which are used as a host elastomer and electrically conductive particles, respectively. A solution for a conductive composite mixture is prepared by the microwave-assisted graphite exfoliation, followed by ultrasonication-induced fragmentation of the exfoliated graphite and ultrasonic blending of PDMS and EFG. Using the prepared solutions for composite and pure PDMS, 1-, 2-, and 3-axis soft sensors are fabricated by airbrush stencil technique where composite mixture and pure PDMS are materials for sensing and insulating layers, respectively. We characterize the soft strain sensors after investigating the effect of PDMS/EFG wt% on mechanical compliance and electrical conductance of the conductive composite.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.81-88
• /
• 2019

In order to understand the effects of the main components of antifoaming agents on the marine benthic ecosystem when silicone-based antifoaming agents are discharged into marine environments, eco-toxicity testing was performed on silicone and alcohol-based antifoaming agent by using benthic amphipod (Monocorophium acherusicum) and luminescent bacteria (Vibrio fischeri). The toxic effects of Polydimethylsiloxane (PDMS) as a main component of silicone-based antifoaming agents on aquatic organisms were also researched. In the results of the eco-toxicity test, luminescent bacteria showed a maximum of 9 times more toxic effects than benthic amphipod for alcohol-based antifoaming agents, and silicone-based antifoaming agents showed a maximum of 400 times more toxic effects than alcohol-based. The $LC_{50}$ and $EC_{50}$ values of PDMS ranged from 10 to $44,500{\mu}g/L$ in phytoplankton, invertebrate, and fish. In the results of applying PBT (P: persistency, B: bioaccumulation, T: toxicity) characteristics as an index showing the qualitative characteristics of PDMS, persistency (P) and bioaccumulation (B) were confirmed. Thus, when PDMS is discharged to marine environments, it could accumulate in the upper trophic level through bioaccumulation and the food chain, which could have negative effects on benthic organisms. The results of this study may be used for objective and scientific risk assessment, considering the major components of antifoaming agents when investigating the effects of various discharged antifoaming agents in marine ecosystem.

• Proceedings of the CALSEC Conference
• /
• 1998.10a
• /
• pp.57-68
• /
• 1998

ㆍ STEP is an International Standard (ISO 10303) - that defines the methodology to create computer interpretable product data models. ㆍ STEP Implementation - allows exchange and sharing of product data while retaining semantics throughout the product life cycle. ' STEP is in deployment - PDM data exchange at Boeing and others - Geometry data exchange at GM and others ㆍ The STEP community overcomes obstacles - “They will never finish the standard” (done 1994) - “They will never be able to transfer solids” (done 1995) - “They will never make solids transfer reliable” (done 1997) - “They will never implement all those Application Protocols”(TBD)(omitted)

• Proceedings of the CALSEC Conference
• /
• 1997.11a
• /
• pp.427-441
• /
• 1997

ㆍEXPRESS에 의한 AP214 Schema 정의 ㆍEXPRESS에 의한 Entity 정의 ㆍEXPRESS에 의한 TYPE, FUNCTION, RULE의 정의 ㆍAIM 축소 정보 모델 (Subset) 구성 ㆍAIM 축소 정보 모델의 예 ㆍ축소 정보 모델에 근거한 소규모 PDM시스템 AP214 개요 정식 명칭 : Core Data for Automotive Design and Processes 파트 번호 : ISO 10303-214 제안시기 : 1992년 STEP 시애틀 회의 (독일에 의하여 제안) 대상 내용 : 자동차의 기획 단계로부터 스타일링, 설계, 실험, 공정 계획, 툴 설계 및 제작, 품질 검사에 이르는 수명 전 주기상에 발생되는 제품 관련 정보 현 상태 : CD(Committee Draft) DIS (Draft International Standard) 표결 진행중(중략)

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.235-246
• /
• 1999

There have been several approaches to integrating heterogeneous database systems in enterprises. Due to their inherent limitations, however, it has been difficult to apply them to actual situations in enterprises. In this paper, we propose EasyConnection, a system that is based on the flexible and extensible architecture and overcomes the limitations of the previous approaches, EasyConnection consists of Wrappers, Sharing Manager, and Clients, and the connections among these components are based on CORBA. It can also be used as the information management mechanism for such application systems as ERP, PDM, and EAI.