• Journal of Practical Engineering Education
• /
• v.16 no.2
• /
• pp.179-184
• /
• 2024

Printed circuit boards (PCBs) are a key component widely used in the production of electronic products, and not only quantitative growth but also qualitative developments such as integration cannot be ignored. Wave soldering equipment is commonly used equipment at manufacturing sites, but it is impossible to configure a dedicated equipment environment suitable for each PCB specification during the preliminary research and prototype development stage. It is neither suitable for development within limited time line nor manufacturing various product groups because only equipment setting conditions can be changed within a given time. In this study, we introduce a case of introducing a PCB pallet to enable selection of optimal process conditions within the limited environment described above. In addition, by presenting a discriminant that can determine in advance whether production is possible with current general-purpose equipment, it is expected that problems that may arise due to limitations in the general-purpose wave soldering equipment environment can be identified and resolved in advance. Ultimately, this palette makes it possible to shorten the development period and improve productivity.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.1
• /
• pp.172-180
• /
• 2002

Polychlorinated biphenyls(PCBs) are large scale industrial chemicals which are using in diverse applications. The goal of this study was to determine if exposure to 2,2',5,5'-tetrachlorobiphenyl (PCB 52) leads to an increase in the production of active oxidants, and subsequently promotes apoptosis of neuronal SK-N-MC cells. Reactive oxygen species (ROS) formation was examined in SK-N-MC cells after treatment of PCB 52 by concentrations and incubation times, respectively. It showed that the rate of ROS production in the cells was increased in a does-dependent manner to 45 min, followed by a return towards control levels after 120 min treatment. We also examined the association of PCB-induced apoptosis with the modulation of biomakers of oxidative damage to lipids (malondialdehyde [MDA]) in SK-N-MC cells. Increased MDA was observed in a dose-dependent manner in groups treated with 10, 15, and 20 figJ me of PCB 52 for 24 h. After treatment of PCB 52, the cells did not show any significant change in the rate of Cu/Zn-superoxide dismutase (Cu/Zn-SOD) activity. Whereas, the cells had a two-fold greater rate of change in catalase activity at 20 ㎍/㎖ of PCB 52 for 24 h when compared to control group. Korean Ginseng is one of the most important crude drugs which has been used as a traditional Oriental medicine. We next investigated protective effect of extracts of ginseng on cytotoxicity induced by PCB 52 in SK-N-MC cells. Pretreatment of SK-N-MC cells with 25-200 μg/ml of ginseng were reduced cell death in a dose-dependent manner in PCB 52-treated cells. To examine the sensitivity of beta-catenin to ginseng, the protective effect of a range of ginseng concentrations was examined in SK-N-MC cells treated with PCB 52. The result demonstrated that ginseng efficiently blocked PCB 52 inducible beta-catenin proteolysis in a concentration dependent manner. The ROS formation was also measured in the presences of extract of ginseng and superoxide dismutase (inhibitor of oxygen free radical production). The both SOD (400 U/ml) and ginseng (200 μg/ml) significantly inhibited RDS generation in PCB 52-treated group.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.402-413
• /
• 2001

Food safety is a term broadly applied to food quality that may adversely affect human health. These include zoonotic diseases and acute and chronic effects of ingesting natural and human-made xenobiotics. There are two major areas of concern over the presence of residues of antibiotics in animal-derived foodstuffs with regard to human health. The first is allergic reactions. Some antibiotics, such as penicillins can evoke allergic reactions even though small amounts of them are ingested or exposed by parenteral routes. The second is development of antibiotic resistance in gut bacteria of human. Recently multi-resistant pneumococcal, glycopeptide-resistant enterococci and gram negative bacteria with extended-spectrum $\beta$-lactamases have spread all over the world, and are now a serious therapeutic problem in human. Although it is evident that drugs are required in the efficient production of meat, milk and eggs, their indiscriminate use should never be substituted for hygienic management of farm. Drug should be used only when they are required. In addition to veterinary drugs, environmental contaminants that were contaminated in feed, water and air can make residues in animal products. Mycotoxins, heavy metals, pesticides, herbicides and other chemicals derived from industries can be harmful both to animal and human health. Most of organic contaminants, such as dioxin, PCBs and DDT, and metals are persistent in environment and biological organisms and can be accumulated in fat and hard tissues. Some of them are suspected to have endocrine disrupting, carcinogenic, teratogenic, immunodepressive and nervous effects. The governmental agencies concerned make efforts to prevent residue problems; approval of drugs including withdrawal times of each preparation of drugs, establishment of tolerances, guidelines regarding drug use and sanitation enforcement of livestock products. National residue program is conducted to audit the status of the chemical residues in foods. Recently HACCP has been introduced to promote food safety from farm to table by reducing hazardous biological, chemical and physical factors. Animal Production Food Safety Program, Quality Assurance Programs, Food Animal Residue Avoidance Databank are para- or non-governmental activities ensuring food safety. This topic will cover classification and usage or sources of chemical residues, their adverse effects, and chemical residue status of some countries. Issues are expanded to residue detection methodologies, toxicological and pharmacokinetic backgrounds of MRL and withdrawal time establishments, and the importance of non-governmental activities with regard to reducing chemical residues in food.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.1
• /
• pp.45-54
• /
• 2020

Recently, market demands of miniaturization, high interconnection density, and fine pitch of PCBs continuously keep increasing. Therefore, SLP (substrate like PCB) technology using a modified semi additive process (MSAP) has attracted great attention. In particular, SLP technology is essential for the development of high-capacity batteries and 5G technology for smartphones. In this study, the reliability of the microvia of hybrid SLP, which is made of conventional HDI (high density interconnect) and MSAP technologies, was investigated by experimental and numerical analysis. Through thermal cycling reliability test using IST (interconnect stress test) and finite element numerical analysis, the effects of various parameters such as prepreg properties, thickness, number of layers, microvia size, and misalignment on microvia reliability were investigated for optimal design of SLP. As thermal expansion coefficient (CTE) of prepreg decreased, the reliability of microvia increased. The thinner the prepreg thickness, the higher the reliability. Increasing the size of the microvia hole and the pad will alleviate stress and improve reliability. On the other hand, as the number of prepreg layers increased, the reliability of microvia decreased. Also, the larger the misalignment, the lower the reliability. In particular, among these parameters, CTE of prepreg material has the greatest impact on the microvia reliability. The results of numerical stress analysis were in good agreement with the experimental results. As the stress of the microvia decreased, the reliability of the microvia increased. These experimental and numerical results will provide a useful guideline for design and fabrication of SLP substrate.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.371-381
• /
• 2014

The bioaccumulation of 16 United States Environmental Protection Agency (USEPA) priority polycyclic aromatic hydrocarbons (PAHs) and alkylated PAHs in the Manila clam, Ruditapes philippinarum exposed to sediments artificially contaminated by Iranian Heavy Crude Oil was measured and the biota-sediment accumulation factor (BSAF) was estimated through laboratory experiments. The proportion of 16 PAHs accumulated in the tissue of R. philippinarum was only from 3 to 7% of total PAHs. Among 16 PAHs, the concentration of naphthalene was highest in the tissue. Alkylated PAHs were highly accumulated more than 93% of total PAHs. The C3 dibenzothiophene was most highly accumulated. The relative composition of alkylated naphthalenes in the tissue of R. philippinarum was lower than in the sediments. In contrast, those of alkylated compounds of fluorenes, phenanthrenes, dibenzothiophenes were higher in the tissue than the sediments. The BSAF for sum of 16 PAHs was 0.11 to 0.13 g carbon/g lipid and that for alkylated PAHs was 0.05 to 0.06 g carbon/g lipid. Naphthalene showed the highest BSAF value. Alkylated PAHs with the same parent compound, BSAF tended to increase with the number of alkylated branch increased, except for alkylated chrysenes. BSAF of total PAHs lies between that of field-based values, and are also similar to those of other persistent organic pollutants (PCBs, DDTs, HCHs). This study provides the BSAF values of individual alkylated PAHs accumulated in R. philippinarum for the first time and will be used as a basis for further understanding the bioaccumulation of organic contaminants in the marine benthic organisms.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.254-259
• /
• 2018

General D-glass(Dielectric glass) fibers are adaptable to PCBs(Printed circuit boards) because they have a low dielectric constant of about 3.5~4.5. However, very few papers have appeared on the physical characteristics of D-glass fibers. D-glass fibers were fabricated via continuous spinning process using bulk D-glass. In order to fabricate the D-glass, raw materials were put into a Pt crucible, melted at $1650^{\circ}C$ for 2 hrs, and then annealed at $521{\pm}10^{\circ}C$ for 2 hrs. We obtained transparent clear glass. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1368^{\circ}C$ to $1460^{\circ}C$, while the winder speed was between 100 rpm and 200 rpm. We investigated the physical properties of the D-glass fibers. The average diameters of the glass fibers were measured by optical microscope and FE-SEM. The average diameters of the D-glass fibers were 21.36 um at 100 rpm and 34.06 um at 200 rpm. The mechanical properties of the fibers were confirmed using a UTM(Universal materials testing machine). The average tensile strengths of the D-glass fibers were 467.03 MPa at 100 rpm and 522.60 MPa at 200 rpm.

• Ocean and Polar Research
• /
• v.38 no.3
• /
• pp.171-184
• /
• 2016

In order to assess the level of contamination and identify the priority contaminants in the Busan coast, intensive sediment sampling was conducted and persistent organic pollutants and heavy metals were analyzed. The Sediment Quality Index (SQI) was derived based on the contaminant data by comparing with Sediment Quality Guidelines (SQGs) established in Korea, Canada, and Australia/New Zealand. Toxic contaminants were found to be widely distributed across the coast. Among organic contaminants, PAHs showed the highest concentration, followed by butyltins, nonylphenols, PBDEs, DDTs, PCBs, HCHs and CHLs. Heavy metals were also abundantly detected with the highest concentration of Zn followed by Cu > Cr > Pb > Ni > As > Cd > Hg. Compared to organic contaminants, most heavy metals, except for Cu and Hg, were homogeneously distributed along the coast in a good relationship with total organic carbon of sediment particles. In general, the concentrations of organic compounds and heavy metals were highest at the inner part of harbor areas with a tendency to decline from inside areas to the outside, indicating the high loading of pollutants from harbors. A high exceedance for low-SQGs and high-SQGs was found for TBT, p'-DDT, p,p'-DDD, Cu and Zn. The SQI scores calculated from low-SQGs and high-SQGs were in the range of 18-100 and 54-100, respectively. The inner part of Busan Harbor, Dadaepo Harbor, and Gamcheon Harbor were observed as being regions of concern. Overall, TBT, Cu, and p,p'-DDT were the chemicals most frequently exceeding SQGs and influencing SQI scores.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.4
• /
• pp.674-679
• /
• 2002

The toxicity and bioaccumulation of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and polychlorinated biphenyls (PCBs) continues to be a focus of research in human and various species. The main human exposure is via the dietary route. This study was carried out to investigate the protective effect of Cornu Cervi Parvum extract on clinical parameters and hepatotoxicity in Sprague-Dawley rat (SD rat) accutely exposured to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Male SD rats received single intraperitoneal (ip) injection of TCDD (40 ㎍/kg), and administered 10 or 20 mg/kg/day of the ethanol extract oral injection for 4 weeks from 1 week before TCDD treatment. The gain in body weight was less in group treated with TCDD than in CON group, while that of C/H+ TCDD group (Cornu Cervi Parvum extract 20 mg/kg/day) increased. The decrease in spleen and testis weight caused by TCDD was prevented by Cornu Cervi Parvum extract 20 mg/kg/day. The fluctuation in BUN content, WBC and platelet count by TCDD intoxication were significantly attenuated by the ethanol extract treatment (20 mg/kg/day for 4 weeks). Treatments of rats with the extract (10 or 20 mg/kg/day) were significantly reduced AST and ALT levels compared with TCDD-treated group. Moderate swelling of hepatocytes, hyperchromatism, acidophilic cytoplasm and cytoplasmic vacuolation were observed in TCDD-treated animals (TCDD group). The administration of EtOH extract 10 or 20 mg/kg along with TCDD significantly alleviated the liver histopathological alteration induced by TCDD. These results suggest that Cornu Cervi Parvum extract can be useful as a protective agent against TCDD, an endocrine disruptor.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.6-12
• /
• 2005

Contamination of soils and groundwater by leakage of petroleum compounds from underground storage tanks (USTs) has become great environmental issues. Conventional methods such as soil vapor extraction (SVE) used for the remediation of unsaturated soils contaminated with volatile organic compounds might not be applied for the removal of semi-volatile organic compounds such as diesel fuels and PCBs, which have low volatility and high hydrophobicity. The objective of this study is to develop a hot air injection method to remove semi-volatile compounds. Additionally, operation parameters such as temperature, air flow rate, and water content are evaluated. Experimental results show that diesel ranged organics (DROs) are removed in the order of volatility of organic compounds. As expected, removal efficiency of organics is highly dependent on the temperature. It is considered that more than $90\%$ of organic contaminants whose carbon numbers range between 17 and 22 can be removed efficiently by the hot air injection-extraction method (modified SVE) over the $100^{\circ}C$. It is also found that increased air flow rate resulted in high removal rate of contaminants. However, air flow rate over 40 cc/min is not effective for the operation aspects, due to mass transfer limitation on the volatilization rate of the contaminants. The effect of the water content on the decane removal is minimal, but some components show large dependence on the removal efficiency with increasing water content.