• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.36-44
• /
• 2019

The purpose of this study is to evaluate the structural performance of press-formed type asymmetric column to beam connections of steel-PC composite module frames. Most of the column sections of the joints making up the modular frame use a closed square steel section. The column-beam connection using the closed column section has difficulty in reducing the workability and securing the fire resistance. In order to overcome this disadvantage, concrete is filled in the asymmetrical open type cross section of the steel plate by press forming. A total of four specimens were fabricated to investigate the structural performance of press formed type asymmetric column to beam connections. The experimental results show that the structural performance and behavior of the asymmetric columns are different depending on whether the asymmetric column cross section is composited or the column width thickness ratio. The structural performance of the press formed type asymmetric column to beam connection was evaluated by comparing the experimental results with the theoretical formulas.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.435-436
• /
• 2019

본 논문은 Platform 기반의 PEBB(Power Electronics Building Block)을 이용한 계통연계형 에너지저장시스템(ESS) PCS의 개발전략과 효율적인 운용 방법에 대해 제안한다. Platform Design이란 표준제조 공정을 통해 다양한 제품을 만들어 내는 기술을 뜻한다. 이 Platform으로 생산되는 Modular PEBB(Power Electronics Building Block)을 이용하여 다양한 용량대의 제품에 대응할 수 있으며, 이를 통해 125kW에서부터 2MW제품까지 병렬확장이 가능하다. PCS의 Platform화로 시스템 용량 확장이 용이하며, 대량 생산이 가능하기 때문에 비용 측면에서의 장점이 있다. 그리고 부분 운전을 통해 운영 효율 향상과 PCS 수명을 늘릴 수 있다. 본 논문에서는 Platform 기반의 PCS의 물리적 및 제어적 구조를 설명하고, 개발전략의 방법에 대해 소개하고자 한다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.189-198
• /
• 1998

3D medical image reconstruction techniques are useful to figure out complex 3D structures from the set of 2D sections. In the paper, 3D medical image reconstruction system is constructed under PC environment and programmed based on modular programming by using Visual C++ 4.2. The whole procedures are composed of data preparation, gradient estimation, classification, shading, transformation and ray-casting & compositing. Three speed optimization techniques are used for accelerating 3D medical image reconstruction technique. One is to reduce the rays when cast rays to reconstruct 3D medical image, another is to reduce the voxels to be calculated and the other is to apply early ray termination. To implement 3D medical image reconstruction system based on PC, speed optimization techniques are experimented and applied.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.415-418
• /
• 2002

MR의 자율주행 기능에는 추종, 접근, 충돌회피, 경고 등의 여러 기능이 있다. 이 기능들을하나의 Neural Network로 학습시키는 것은 어려운 일이다. 이것을 보안하고자 기능들을 각각의 Module로 구성하여 상황에 맞게 학습된 Module의 출력 값으로 MR을 제어하였다 로봇은 인간의 감각을 대신할 수 있는 다중 초음파 센서와 PC 카메라를 장착하고 있으며, 이곳에서 측정된 환경정보 데이터들은 Modular Neural Network을 통해 학습이 이루어진다 MNN에서의 출력값은 Gating Network(GN)에서 로봇의 진행 방향과 속도를 스위칭 출력함으로서 MR을 제어하는데 사용된다. MNN 내 EN의 활성화 함수 최적결합을 통해 효과적인 MNN을 구성하였다. 본 논문에서는 Modular Neural Network의 Expert Network(EN)을 최적설계 하였고, 제안한 MNN의 검증을 위해 실시간으로 MR에 구현하였다.

• Journal of the Korea Concrete Institute
• /
• v.28 no.1
• /
• pp.3-11
• /
• 2016

The concern about hollow core PC slab has been increased to improve the workability during a construction of building by reducing self weight of structural members. In this manner, recently, TRS (Tripple Ribs Slab) was developed as a new type of half PC slab system. TRS member consists of the triple webs and the bottom flange prestressed by strands. The slab system is completed by casting of topping concrete on the TRS after filling styrofoam between the webs. This paper, presents a flexural experiment to investigate the flexural capacity of the TRS. Five full scale TRS members were made and tested under simple support condition to be failed by flexure and their strength was evaluated by code equations; the variables in the test are the depth and the presence of topping or raised spot formed when slip-forming. In addition, a nonlinear sectional analysis was performed for the specimens and the result was compared with the test results. From the study, it was found that the TRS has enough flexural strength and ductility to resist the design loads and its strength can be suitably predicted by using code equations. The raised spot did not affect the strength so that the spot need not to be removed by doing additional work. For the more accurate prediction of TRS's flexural behavior by using nonlinear sectional analysis, it is recommended to consider the concrete's brittle property due to slip-forming process in the modeling.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.643-654
• /
• 2021

Phytophthora capsici is one of the most destructive hemibiotrophic pathogens; it can cause blight in chili peppers, and secrete various effector proteins to infect the plants. These effectors contain an N-terminal conserved RXLR motif. Here, we generated full-length RXLR effector coding genes using primer pairs, and cloned them into the pGR106 vector for in planta expression. Two of these genes, PcREK6 and PcREK41 (P. capsici RXLR effector from the Korea isolate), were further characterized. PcREK6 and PcREK41 genes showed that they encode effector proteins with a general modular structure, including the N-terminal conserved RXLR-DEER motif and signal peptide sequences. PcREK6 and PcREK41 expressions were strongly induced when the chili pepper plants (Capsicum annuum) were challenged with P. capsici. These results provide molecular evidence to elucidate the virulence or avirulence factors in chili pepper. Our results also showed that two effectors induce hypersensitive response (HR) cell death when expressed in chili leaves. Cell death suppression assays in Nicotiana benthamiana revealed that most effectors could not suppress programmed cell death (PCD) triggered by Bcl-associated X (BAX) or Phytophthora infestans elicitin (INF1). However, PcREK6 fully suppressed PCD triggered by BAX, while PcREK41 partially suppressed PCD triggered by INF1 elicitin. These results suggest that PcREK effectors from P. capsici interact with putative resistance (R) proteins in planta, and different effectors may target different pathways in a plant cell to suppress pattern-triggered immunity (PTI) or effector-triggered immunity (ETI).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.70-75
• /
• 2003

There come various types of robot with researches for mobile robot. This paper introduces the multi-joint snake robot having 16 degree of freedom and composing of eight-axis. The biological snake robot uses the forward movement friction and the proposed artificial snake robot uses the un-powered wheel instead of the body of snake. To determine the enable joint angle of each joint, the controller inputs are considered such as color and distance using PC Camera and ultra-sonic sensor module, respectively. The movement method of snake robot is sequential moving from head to tail through body. The target for movement direction is decided by a certain article be displayed in the PC Camera. In moving toward that target, if there is any obstacle then the snake robot can avoid by itself. In this paper, we show the method of snake robot for tracing the target with experiment.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.31-37
• /
• 2018

Energy Storage System(ESS) is a system that maximizes energy efficiency by selectively storing and using the generated power when needed. Therefore, energy must be able to be charged or supplied at any time, and non-operating time should be minimized even in the case of failure or maintenance. However, current large-capacity energy storage systems must be shut down during maintenance due to structural problems. In this paper, we propose a PCS for 1MW ESS by configuring modular for large capacity ESS in parallel and verified of the hot swap technology that can replace, change, and repair the components that make up the system while keeping the system operating.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.227-230
• /
• 2001

In this paper, We present a 3D image data for ocular refina. This 3D display techniques are used voxel(cuboid) projection. Voxel is 3D reconstruction method of the pixel. In this paper, 3D image display system is constructed under PC environment and programed based on modular programming by using Visual C++. The hole procedures are composed of data preparation, 3D Display over transformation and scaling.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.34-40
• /
• 2000

최근 CNC에는 또 하나의 전기를 마련할 수 있는 여러 가지 새로운 이슈들이 등장하고 있다. 첫 번째 이슈는 고도로 발달해가고 있는 반도체 산업의 영항으로 CPU의 속도가 기하급수적으로 달라지고 있고 메모리 용량이 상상을 초월할 정도로 급속한 발전을 거듭하고 있다. 이런 환경 속에서 자연스럽게 CNC도 성능이 우수한 하드웨어와 그 성능에 어울리는 고급 소프트웨어 탑재가 요구된다. 두 번째 이슈는 기존의 공작기계에서 생각하지 못했던 개념의 변화이다.(중략)