• 제목/요약/키워드: patterned membrane

검색결과 19건 처리시간 0.026초

MEMS 고체 추진제 추력기의 점화 시스템 개발 (Development of Ignition System for MEMS Solid Propellant Thruster)

  • 이종광;박종익;권세진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제28회 춘계학술대회논문집
    • /
    • pp.91-94
    • /
    • 2007
  • 마이크로 고체 추진제 추력기의 점화 시스템의 제작 및 점화 실험에 관한 연구 결과를 기술하겠다. 유리 박막 마이크로 백금 점화기는 일반적인 금속 박리 공정과 감광 유리 제작 공정을 이용하여 제작되었다. 백금 층의 두께는 $2000{\AA}$, 점화기 패턴의 폭은 $40{\mu}m$ 였다. 제작된 유리 박막의 두께는 $15{\mu}m$, 유리 박막의 지름은 1 mm 였다. HTPB/AP 추진제를 이용하여 점화 실험을 수행하였다. 12 V의 전압을 사용한 경우, 점화 지연 시간은 1.6 s 였으며 이 때의 점화 에너지는 1.4 J로 측정되었다.

  • PDF

1,3-bisdicyanovinylindane을 이용한 단백질 패터닝의 광학적 감지 (Optical detection of protein patterns using 1,3-bisdicyanovinylindane)

  • 박영민;이지혜;이창수;손영아
    • 한국염색가공학회지
    • /
    • 제19권4호
    • /
    • pp.32-37
    • /
    • 2007
  • In this study, we have obtained the protein patterns using the membrane patterning of soft-lithography technique. The rapid detection of protein including bovine serum albumin (BSA) was resulted from the interaction with 1,3-bisdicyanovinylindane. For the proof of the interaction between BSA and dye, the UV-vis absorption spectra of BSA and dye were observed at 278 nm and 580 nm, respectively. As expected, the absorption spectrum of the interaction between BSA and dye was observed at 584nm. The absorption spectrum of the interaction was red-shifted. In addition, the optical images of the selectively reacted protein patterns showed the distinctive change of patterned color at different pH conditions. Because the dye has negative charges, the charge of BSA at different pH conditions could influence the interaction behavior between dye and BSA. Therefore, in the case of pH 7, the selectively patterned protein substrates obtained deep blue color pattern caused by electrostatic interaction between negative charges of the dye and positive charges of the BSA. However, in the case of pH 10, selectively patterned protein substrates obtained light blue color pattern because the electrostatic interaction was relatively lower than pH 7 due to the change of overall charge distribution of BSA.

나노섬모의 자연모사 기술 (Biomimetics of Nano-pillar)

  • 허신;최홍수;이규항;김완두
    • Elastomers and Composites
    • /
    • 제44권2호
    • /
    • pp.98-105
    • /
    • 2009
  • 내이의 달팽이관은 기저막(basilar membrane)과 유모세포(hair cells)라는 두 가지 중요한 요소로 이루어져 있다. 기저막은 귀로 들어오는 소리를 주파수에 따라 분리하는 기능을 가지고 있으며, 기저막 위에 있는 유모세포는 생체전기 신호를 발생시키는 기계적 감각 수용기관이다. 인간의 생체청각기구를 모사한 인공와우와 신개념의 인공감각기관을 개발하기 위해서, 본 논문에서는 ZnO 압전 나노필라를 사용하여 인공유모세포(artificial hair cell)를 구현할 수 있는 핵심 기반 기술인 생체모사 기술을 연구하였다. 그 구체적인 방법으로 ZnO 나노필라를 저온성장법으로 유연기판에, 고온성장법으로 실리콘 웨이퍼에 성장시켰다. 유연기판과 실리콘 웨이퍼 위에 ZnO 나노필라를 성장 전에 미리 패턴을 만들었고, 기판에 선택적으로 ZnO 나노필라를 성장시켰다. 또한 ZnO 나노필라의 동적 정적 거동을 이해하기 위해 다중 물리 해석기법을 사용하여 ZnO 나노필라의 electric potential, von Mises stress, 변형량 등을 분석하였다. 본 연구에서는 ZnO 나노필라를 제작 및 패터닝하는 기술과 최적화하는 다중 물리 해석기술을 이용하여 인공 유모세포를 구현하는 핵심기술을 개발하였다.

Fabrication of Ordered Nanoporous Alumina Membrane by PDMS Pre-Patterning

  • 김별;이진석
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.265.1-265.1
    • /
    • 2013
  • Nanoporous anodic aluminum oxide (AAO), a self-ordered hexagonal array has various applications for nanofabrication such as nanotemplate, and nanostructure. In order to obtain highly-ordered porous alumina membranes, Masuda et al. proposed a two-step anodization process however this process is confined to small domain size and long hours. Recently, alternative methods overcoming limitations of two-step process were used to make prepatterned Al surface. In this work, we confirmed that there is a specific tendency used a PDMS stamp to obtain a pre-patterned Al surface. Using the nanoindentaions of a PDMS stamp as chemical carrier for wet etching, we can easily get ordered nanoporous template without two-step process. This chemical etching method using a PDMS stamp is very simple, fast and inexpensive. We use two types of PDMS stamps that have different intervals (800nm, 1200nm) and change some parameters have influenced the patterning of being anodized, applied voltage, soaking and stamping time. Through these factors, we demonstrated the patterning effect of large scale PDMS stamp.

  • PDF

가변 초점거리 마이크로 유체렌즈 제작 (Fabrication of a Micro fluidic Lens having variable focal length)

  • 이준석;박준근;김규만
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.572-575
    • /
    • 2005
  • A microlens connected to microfluidic channel is fabricated. The microlens is sealed with an elastomeric membrane which deforms by pressure of fluid driven by a syringe pump resulting in the shape change of the microlens. The optical properties of the microlens could be controlled by changing the microlens shape. The microlens system were made of an elastomer, PDMS, using molding from a photoplastic master patterned by UV photolithography. The test results show the optical property of the lens could be made into convex and concave type by applying the fluidic pressure positive and negative.

  • PDF

디스크 필터의 카올린 분리특성 (Kaolin Separation Characteristics of the Disc Filters)

  • 박혜정;김대천;김형성;정건용
    • 멤브레인
    • /
    • 제24권5호
    • /
    • pp.393-399
    • /
    • 2014
  • 본 연구에서는 디스크 링 형태에 패터닝된 박막을 적층시킨 모듈의 분리특성을 규명하고자 투과실험을 수행하였다. 먼저, 본 연구에서 자체 제작한 5가지 형태의 디스크 필터의 순수 투과도를 측정하였으며 그 값은 0.25 내지 $2.24L/m^2{\cdot}hr{\cdot}bar$이었다. 0.1 wt% 카올린 수용액을 투과시키면 순수 투과율이 가장 높은 모듈의 투과유속이 가장 높았고, 순수 투과율이 가장 낮았던 모듈의 카올린 투과유속이 가장 낮게 나타났다. 그러나 모든 모듈의 카올린 투과유속이 순수 투과율에 비례하지는 않았다. 또한 0.1 wt% 수용액으로 장시간 운전하기 위하여 디스크 필터 모듈 1에 주기적으로 역세척을 실시하였으며 가장 효율적인 운전조건은 투과시간 8분, 역세척 2분 주기임을 확인하였다.

선택적으로 성장 시킨 다중 전극판을 갖는 다자유 IPMC 작동기 (MDOF Ionic-Polymer-Metal-Composite Actuators with Selectively Grown Multiple Electrodes)

  • 전진한;오일권
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.294-298
    • /
    • 2008
  • The ionic polymer-metal composite actuators with selectively grown multiple electrodes were developed to mimic the swimming locomotion of a fish. The developed method is based on combining electroplating with the electroless chemical reduction using the patterned mask. The advantages of this fabrication method are that the initial compositing between the polymer and platinum particles can be assured by the chemical reduction method, and the thickness of each electrode can be controlled easily and rapidly by electroplating. By using the fabricated actuator with a multiple degree of freedom, the oscillatory wave of the flexible membrane actuator was generated and a twisting motion was also realized to verify the possibility of mimicking the fish-like locomotion. The frequency response function was analyzed to investigate the natural frequency and the damping factor by a mechanical shaker and direct electrical excitation through the swept-sine method. Present results show that this novel method can be a promising technique to easily pattern each of multiple electrodes and to implement the biomimetic motion of the polymer actuators with good mechanical bending performance.

  • PDF

감마선 검출을 위한 초전도 상전이 센서 (Development of Superconducting Transition Edge Sensors for Gamma Ray Detection)

  • 이영화;김용함
    • Progress in Superconductivity
    • /
    • 제9권2호
    • /
    • pp.162-166
    • /
    • 2008
  • We are developing a sensitive gamma ray spectrometer based on superconducting transition edge sensors. The detector consists of a small piece of high purity Sn as an absorber and a Ti/Au bilayer as a temperature sensor. It is designed to measure the thermal signal caused by absorption of gamma rays. The mechanical support and the thermal contact between the absorber and the thermometer were made with Stycast epoxy. The bilayer was formed by e-beam evaporation and patterned by wet etching on top of a $SiN_X$ membrane. A sharp superconducting transition of the film was measured near 100 mK. When the film was biased to the edge of the transition, signals were observed due to single photon absorption emitted from an $^{241}Am$ source. The measured spectrum showed several characteristic peaks of the source including 59.5 keV gamma line. The full with at half maximum was about 900 eV for the 59.5 keV gamma line. The background was low enough to resolve low energy lines. Considerations to improve the energy resolution of the gamma ray spectrometer are also discussed.

  • PDF

다공성 폴리(ε-카프로락톤)/실리카 복합체의 제조 및 특성평가 (Synthesis and Characterization of Porous Poly(ε-caprolactone)/Silica Nanocomposites)

  • 손시원;최지은;조훈;강대준;이득용;김진태;장주웅
    • 폴리머
    • /
    • 제39권2호
    • /
    • pp.323-328
    • /
    • 2015
  • 졸-젤법을 이용한 전기방사법과 캐스팅법으로 폴리(${\varepsilon}$-카프로락톤)(PCL) 나노섬유와 PCL/실리카 막을 각각 제조하였다. 용매에 N,N-dimethylformamide(DMF)를 혼합한 경우 부드럽고 연속적인 PCL 나노섬유가 제조되었다. PCL 기지상에 tetraethyl orthosilicate(TEOS) 농도가 0에서 40 vol%로 증가함에 따라 PCL/silica의 강도는 12에서 8MPa로 감소하였지만, 7주까지 phosphate buffered saline solution(PBS) 침지에 따른 강도값의 변화는 없었다. 실리카 첨가에 따른 인장강도의 감소는 기공도의 증가에 기인하였다. PCL/실리카 막의 결정구조는 사방정계로 실리카 농도가 0에서 40 vol%로 증가함에 따라 crystallite 크기는 57에서 18 nm로 감소하였다. 세포독성 실험결과, PCL/실리카는 시편의 수축 및 변형이 없고, 검체 주위에서 변색이나 L-929 세포의 이상이 관찰되지 않는 무독성이었다.