• 대한기계학회논문집B
• /
• 제21권4호
• /
• pp.551-561
• /
• 1997

Mixed convection of air in a horizontal concentric cylindrical annulus is investigated numerically. Isothermal boundary conditions are prescribed at the inner and outer cylinders, with the inner cylinder being warmer. The forced flow is induced by the outer cylinder which is rotating slowly with constant angular velocity with its axis at the center of the annulus. The effect of the forced flow on the flow pattern and heat transfer of natural convection is investigated for the annulus of (inner-cylinder radius/gap width) = 1. There appear two eddies, one eddy or no eddy according to the Rayleigh and Reynolds numbers. Map of the three flow regimes is constructed on the Ra-Re plane. (author). 28 refs., 9 figs., 2 tabs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.45-50
• /
• 2000

A numerical investigation is made of three-dimensional buoyant convection of a Boussinesq-fluid in a vertical cylinder. The top and bottom endwalls are thermally insulated. Flow is driven by the substantial azimuthal variations in thermal boundary conditions. Comprehensive numerical solutions to the Navier-Stokes equations are obtained. The representative Rayleigh number is large, thus, the overall flow pattern is of boundary layer-type. Three-dimensional (low characteristics are described. Specially, the global flow and the heat transfer features are delineated when the severity of azimuthal variation of sidewall temperature n, is intensified. Temperature and velocity fields on the meridional planes and the planes of constant height are presented. The global flow weakens as n becomes large. The pattern of the local Nusselt number on the surface of cylinder is similar regardless of n. The convective gain in heat transfer activities is reduced as n increases.

• Journal of Microbiology
• /
• 제45권3호
• /
• pp.205-212
• /
• 2007

Anoxygenic photosynthesis, performed primarily by anoxygenic photosynthetic bacteria (APB), has been supposed to arise on Earth more than 3 billion years ago. The long established APB are distributed in almost every corner where light can reach. However, the relationship between APB phylogeny and source environments has been largely unexplored. Here we retrieved the pufM sequences and related source information of 89 pufM containing species from the public database. Phylogenetic analysis revealed that horizontal gene transfer (HGT) most likely occurred within 11 out of a total 21 pufM subgroups, not only among species within the same class but also among species of different phyla or subphyla. A clear source environment feature related phylogenetic distribution pattern was observed, with all species from oxic habitats and those from anoxic habitats clustering into independent subgroups, respectively. HGT among ancient APB and subsequent long term evolution and adaptation to separated niches may have contributed to the coupling of environment and pufM phylogeny.

• 소성∙가공
• /
• 제31권3호
• /
• pp.143-150
• /
• 2022

The purpose of this study was to investigate an innovative hydroforming process for the cost-effective manufacturing of double layered tube with circumferentially corrugated patterns. Conventional double pipe heat exchanger has relatively poor heat transfer efficiency because of the limited contact area resulting from the concentrically arranged simple cylindrical structure. As a promising alternative to enhance heat transfer efficiency, double layered tube with corrugated internal pattern was considered in this study. To fabricate corrugated inner tube, innovative tube hydroforming system was developed. The customized loading paths were established using the simulated forming pressure and contracting stroke at various bar diameters. Experimentally obtained cross-sectional profiles were analyzed to evaluate the reliability and applicability of the hydroformed tube with various patterns. The results demonstrate that the proposed hydroforming process can be a feasible alternative for manufacturing high-performance double-tube heat exchangers.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.178-179
• /
• 2018

최근 자율주행 및 음성인식 등 인공지능 분야에서 기계학습을 이용한 방법이 활발히 연구되고 있다. 디지털 영상에서 특정 사물이나 영역을 인식하기 위해 고전적인 경계검출 및 패턴인식 등의 고전적인 영상처리 방법으로는 많은 한계를 가지고 있으나 deep-learning 등 기계학습 방법을 이용하면 사람의 인지수준에 근접한 결과를 얻을 수 있다. 하지만 기본적으로 deep-learning 등 기계학습은 방대한 양의 학습데이터가 확보되어야 한다. 따라서 환경 분석을 위한 항공사진처럼 데이터의 양이 매우 적은 경우 영역 구분을 위해 기계학습을 적용하기 어렵다. 본 연구에서는 입력영상의 dataset 크기가 적고 입력 영상의 형태가 training dataset의 category에 포함되지 않는 경우 사용할 수 있는 transfer-learning 기법을 적용하며 이를 이용하여 영상 내에서 특정 영역 검출을 수행한다.

• 대한화학회지
• /
• 제67권6호
• /
• pp.407-414
• /
• 2023

The present study uses quasi-classical trajectory procedures to examine the vibrational relaxation and dissociation of the methyl and ring C-H bonds in excited methylpyrazine (MP) during collision with either N₂ or O₂. The energy-loss (-ΔE) of the excited MP is calculated as the total vibrational energy (E_T) of MP is increased in the range of 5,000 to 40,000cm^-1. The results indicate that the collision-induced vibrational relaxation of MP is not large, increasing gradually with increasing E_T between 5,000 and 30,000 cm^-1, but then decreasing with the further increase in E_T. In both N₂ and O₂ collisions, the vibrational relaxation of MP occurs mainly via the vibration-to-translation (V→T) and vibration-to-vibration (V→V) energy transfer pathways, while the vibration-to-rotation (V→R) energy transfer pathway is negligible. In both collision systems, the V→T transfer shows a similar pattern and amount of energy loss in the ET range of 5,000 to 40,000cm^-1, whereas the pattern and amount of energy transfer via the V→V pathway differs significantly between two collision systems. The collision-induced dissociation of the C-H_methyl or C-H_ring bond occurs when highly excited MP (65,000-72,000 cm^-1) interacts with the ground-state N₂ or O₂. Here, the dissociation probability is low (10^-4-10^-1), but increases exponentially with increasing vibrational excitation. This can be interpreted as the intermolecular interaction below E_T = 71,000 cm^-1. By contrast, the bond dissociation above E_T = 71,000 cm^-1 is due to the intramolecular energy flow between the excited C-H bonds. The probability of C-H_methyl dissociation is higher than that of C-H_ring dissociation.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.1-8
• /
• 2002

Metal surface temperatures around the combustion chamber in a gasoline engine directly affect thermal durability and performance of the engine. Metal surface temperatures are influenced by many cooling factors such as drilled water passage, deflector, combustion chamber wall thickness, pillar, and coolant flow pattern. The object of this study is to learn how the coolant passages and coolant flow pattern in an engine influence to the engine metal surface temperature at engine full load and speed. From the test result, it is suggested a plan to reinforce the engine stiffness and to reduce the thermal stress simultaneously. Also, approaches are introduced to reduce the thermal load on the engine by adjusting the discharging direction from the water pump and by optimizing the water transfer holes in the cylinder head gasket. These methods and the optimized engine cooling system, which were suggested in this paper, were adapted for an engine in progress to eliminate the exhaust valve seat wear.

• 전자공학회논문지SC
• /
• 제43권1호
• /
• pp.39-44
• /
• 2006

델타시그마 변환기에서 limit cycle 에 의한 패턴 노이즈 문제는 오래 동안 설계자들을 괴롭혀 온 문제이다. 델타시그마 변환기의 동작과 출력은 입력과 초기치에 의해 결정된다. 본 논문은 델타시그마 변환기의 구조에 따른 패턴잡음의 발생정도를 널리 쓰이는 네 가지 모델로 비교 하였다. 델타시그마 변환기 중 적분기형 과 공진기형의 차이와 부궤환 방식에 따른 차이를 비교 하였으며 그 결과는 적분기 형식의 증폭단을 사용하는 델타시그마 변환기가 패턴잡음을 적게 발생시키는 것으로 판명되었다.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.894-898
• /
• 2009

In a post printing section of roll to roll printing systems, scratch problem is the major defects. The functional qualities such as conductivity, mobility could deteriorate because of the scratch defect. In general, the scratch of the printed pattern on the flexible substrate was induced from a contact between rolls and printed pattern in the post printing section. In this paper, for non-contacting transfer of a moving web, a mathematical tension model has been developed considering strain due to air floatation and the proposed mode has been validated by numerical simulation. Additionally, the correlation between floatation height and speed compensation to control the tension and register are investigated. On the basis of the proposed model, a guide line of speed control in R2R printing system is presented to guarantee the non-contact between rolls and R2R printed pattern on the flexible substrate.

• 대한금속재료학회지
• /
• 제48권1호
• /
• pp.90-100
• /
• 2010

Micro-conductive patterns were microfabricated on an insulating substrate ($SiO_2$) surface by a selective electroless nickel plating process in order to investigate the formation of seed layers. To fabricate micro-conductive patterns, a thin layer of metal (Cu.Cr) was deposited in the desired micropattern using laser-induced forward transfer (LIFT). and above this layer, a second layer was plated by selective electroless plating. The LIFT process. which was carried out in multi-scan mode, was used to fabricate micro-conductive patterns via electroless nickel plating. This method helps to improve the deposition process for forming seed patterns on the insulating substrate surface and the electrical conductivity of the resulting patterns. This study analyzes the effect of seed pattern formation by LIFT and key parameters in electroless nickel plating during micro-conductive pattern fabrication. The effects of the process variables on the cross-sectional shape and surface quality of the deposited patterns are examined using field emission scanning electron microscopy (FE-SEM) and an optical microscope.