• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.92-98
• /
• 2012

In this sturdy, large experimental (ISO 13785-2) was performed to analyze the building materials used in fire retardant materials for aluminum composite panel and in general properties. As a results, maximum temperature in the case of the general materials was measured in 210 seconds $1,021^{\circ}C$, the retardant materials was measured in 1,200 seconds early $1,190^{\circ}C$. The retardant material of aluminum composite panel, Fire behavior if the ignition is slow and the general materials in aluminum composite panel, fire ignition and combustion at the same time was growing rapidly. The general materials and flame-retardant material of aluminum composite panel was an obvious difference to the combustion ignition but after ignition combustion mode showed a similar pattern of the rapidly vertical spread of flame. The results of this study, in order to reduce the risk of aluminum composite panels for fire and the retardant materials used for ignition the slow should be actively encouraging. Also after the ignition, there is an urgent need to put out a fire in exterior materials for extinguishing facilities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.1-7
• /
• 2012

At the industrial work site, the manufacturing process is being automated to improve work efficiency. However, it is often difficult to automate the entire manufacturing process, and there are spaces in which workers there are constantly exposed to danger. To protect such workers from the danger, this paper studied a worker safety management system for the industrial work site which uses a location recognition system and which is based on the Ubiquitous-Wireless Sensor Network (U-WSN). Using wireless signals, the distance between two devices can be measured and the location of a worker can be calculated using triangularization in 3-D. But at the industrial work sites where there are a lot of steel and structures, errors occur due to signal reflection and multi-path, etc., which makes it difficult to get the accurate location. To address this problem the following was done: first, a circular polarization patch antenna appropriate to the work site was used to reduce the degree of error that may occur from the antenna emission pattern and the particular Line of Sight (LOS); second, a 3-D localization technique and a filtering algorithm were used to improve the accuracy of location determination. The developed system was tested by using it on a wharf crane to validate its accuracy and effectiveness. The proposed location recognition system is expected to contribute greatly in ensuring the safety of workers at industrial work sites.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.821-830
• /
• 2006

As internet worms are spread out worldwide, the detection and filtering of worms becomes one of hot issues in the internet security. As one of implementation methods to detect worms, the Linux Netfilter kernel module can be used. Its basic operation for worm detection is a string matching where coming packet(s) on the network is/are compared with predefined worm signatures(patterns). A worm can appear in a packet or in two (or more) succeeding packets where some part of worm is in the first packet and its remaining part is in its succeeding packet(s). Assuming that the maximum length of a worm pattern is less than 1024 bytes, we need to perform a string matching up to two succeeding packets of 2048 bytes. To do so, Linux Netfilter keeps the previous packet in buffer and performs matching with a combined 2048 byte string of the buffered packet and current packet. As the number of concurrent connections to be handled in the worm detection system increases, the total size of buffer (memory) increases and string matching speed becomes low In this paper, to reduce the memory buffer size and get higher speed of string matching, we propose a string matching scheme without using buffer. The proposed scheme keeps the partial matching result of the previous packet with signatures and has no buffering for previous packet. The partial matching information is used to detect a worm in the two succeeding packets. We implemented the proposed scheme by modifying the Linux Netfilter. Then we compared the modified Linux Netfilter module with the original Linux Netfilter module. Experimental results show that the proposed scheme has 25% lower memory usage and 54% higher speed compared to the original scheme.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.317-326
• /
• 2010

Nowadays, transmission bandwidth for network traffic is increasing and the type is varied such as peer-to-peer (PZP), real-time video, and so on, because distributed computing environment is spread and various network-based applications are developed. However, as PZP traffic occupies much volume among Internet backbone traffics, transmission bandwidth and quality of service(QoS) of other network applications such as web, ftp, and real-time video cannot be guaranteed. In previous research, the port-based technique which checks well-known port number and the Deep Packet Inspection(DPI) technique which checks the payload of packets were suggested for solving the problem of the P2P traffics, however there were difficulties to apply those methods to detection of P2P traffics because P2P applications are not used well-known port number and payload of packets may be encrypted. A proposed algorithm for identifying P2P heavy traffics based on flow transport parameters and behavioral characteristics can solve the problem of the port-based technique and the DPI technique. The focus of this paper is to identify P2P heavy traffic flows rather than all P2P traffics. P2P traffics are consist of two steps i)searching the opposite peer which have some contents ii) downloading the contents from one or more peers. We define P2P flow patterns on these P2P applications' features and then implement the system to classify P2P heavy traffics.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.13-23
• /
• 2022

In this paper, we propose a detailed component image classification algorithm by fashion item for unstructured data retrieval in the fashion field. Due to the COVID-19 environment, AI-based online shopping malls are increasing recently. However, there is a limit to accurate unstructured data search with existing keyword search and personalized style recommendations based on user surfing behavior. In this study, pre-processing using Mask R-CNN was conducted using images crawled from online shopping sites and then classified components for each fashion item through CNN. We obtain the accuaracy for collar of the shirt's as 93.28%, the pattern of the shirt as 98.10%, the 3 classese fit of the jeans as 91.73%, And, we further obtained one for the 4 classes fit of jeans as 81.59% and the color of the jeans as 93.91%. At the results for the decorated items, we also obtained the accuract of the washing of the jeans as 91.20% and the demage of jeans accuaracy as 92.96%.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.322-330
• /
• 2022

With the development of media, modern times are actively exchanging cultures and information around the world. Therefore, product development using traditional material, which are Korean cultural heritages, can be said to be another medium that can promote our unique culture to the world. Therefore, this study attempted to develop a product suitable for the modern lifestyle that combines tradition and modernity by investigating and analyzing Korean roof tiles and applying the formative elements identified as a result of the study. Among the types of roof tiles, a Sumaksai, which is located on the front of the roof and stands out for decoration, was selected as the subject of the study, and it was developed by combining it with lighting and plates as an item for modern people seeking a life full of personality. In product development, we tried to express the traditional style as it is by making the most of the elements of the Sumaksai, and the lotus pattern, which was most commonly used in each era when roof tiles were made, was simplified and applied to the product. As the products developed in this way are used in our daily lives, we hope that users' interest in ours will increase, and that the development of various products through research on traditional material can be activated as a way to spread our culture around the world.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.260-265
• /
• 2004

This study was carried out to investigate aroma patterns of Hanwoo (Korean cattle) beef using electronic nose during refrigerated storage, and to compare these results with chemical quality (pH, TBARS). The M. longissimus muscle from Hanwoo carcasses after 24 hrs postmortem was obtained and stored at 5${\pm}$1$^{\circ}C$ for 7 days. Sensitivity (dR/RO) values among electronic nose data were changed differently during refrigerated storage, and showed significant difference on the 7th day of storage (p<0.01). The dR/RO from SY/G, SY/AA, SY/Gh, SY/gCTl, SY/gCT decreased but those from SY/LG, T30/1, P10/1, P10/2, P40/1, T70/2, PA2 increased during storage for 7 days. Mapping these data using PCA (principal component analysis) showed that the 1st day data were present in the middle of the right side, the 3rd day data were present in bottom part of this area and the 7th day data spread out more widely on the left side. In case of DFA (discriminant factor analysis), the flock clustered round and located in different side clearly comparing with PCA plot. In analysis of correlation coefficients among electronic nose data and chemical quality data, there was significant correlation among sensor data (p<0.001). But pH and TBARS were not significantly correlated with electronic nose data. Consequently, PCA and DFA plot by electronic nose data showed difference during refrigerated storage and there were significant correlations among sensors. Therefore it will be possible to detect separate aroma patterns of Hanwoo beef using electronic nose.

• Microbiology and Biotechnology Letters
• /
• v.51 no.4
• /
• pp.500-506
• /
• 2023

Carbapenem-resistant Klebsiella pneumoniae (CRKP) is emerging as a worldwide public health threat. Recently, Klebsiella pneumoniae carbapenemase-2 (KPC-2)-producing sequence type (ST) 307 was identified main clone of CRKP, and dissemination of ST307 was reported in South Korea. This study examined the molecular characteristic and antimicrobial resistance pattern of 50 CRKP isolated from a tertiary hospital in Daejeon, from March 2020 to December 2021. Epidemiological relationship was analyzed by Multilocus sequence typing (MLST) and antimicrobial susceptibility test was determined using disk-diffusion method. PCR and DNA sequence analysis were performed to identify carbapenemase genes. CRKP infections were significantly more frequent in males and the patients aged ≥ 60 years. Among the 50 CRKP isolates, 46 isolates (92.0%) were multidrug-resistant (MDR), and 44 isolates (88.0%) were carbapenemase-producing K. pneumoniae (CPKP). The major carbapenemase type was KPC-2 (36 isolates, 72.0%) and New Delhi metalloenzyme-1 (NDM-1) and NDM-5 were identified in 7 isolates (14.0%) and 1 isolate (2.0%), respectively. In particular, 88.9% (32/36) of KPC-2-producing K. pneumoniae belonged to ST307, whereas 87.5% (7/8) of NDM-1,-5-producing K. pneumoniae belonged to non-ST307. These results suggest that proper infection control and effective surveillance network need to prevent not olny the spread of ST307, but also the development of non-ST307.

• Korean journal of applied entomology
• /
• v.32 no.3
• /
• pp.307-316
• /
• 1993

The potential of using GIS in analyzing pest surveillance data was explored. The Spatial Analysis System (SPANS) was used to construct a spatial data base to study pest distributions using pest surveillance data collected from 152 stations in South Korea. The annual spatIal distributions of the striped rice borer(SRB), Chdo suppressalis, showed that high densities started to expand in the early 1980s, reaching a peak in 1988. The pattern change appears to be related to cultivation of japonica and indica-japonica hybrid varieties in South Korea. Japo7l!ca varieties have longer duration resulting in the SRB haVlng more time to mature and hibernate in wmter. The locus of SRB spread appears to be located in the mid-west region near lri, Chun~ Buk Province. High brown planthopper (BPH) populations in South Korea are often related to the early immigration and temperature. The simulated distribution of PPH densities in September using these two factors was compared with the actual distribution obtained using 1990 data. The two density maps corresponded closely excepL for differences in the south eastern valley. By overlaying the simulated map layer with the elevation and rice area maps, more specific BPH risk zones could be identified.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.182-192
• /
• 2008

In oder to develop a decision supporting system for oil spill response, the prototype of pollution response support system which has integrated oil spill prediction system and pollution risk prediction system has developed for Incheon-Daesan area. Spill prediction system calculates oil spill aspects based on real-time wind data and real-time water flow and the residual volume of spilt oil and spread pattern are calculated considering the characteristic of spilt oil. In this study, real-time data is created from results of real-time meteorological forecasting model(National Institute of Environmental Research) using ftp, real-time tidal currents datasets are built using CHARRY(Current by Harmonic Response to the Reference Yardstick) model and real-time wind-driven currents are calculated applying the correlation function between wind and wind-driven currents. In order to model the feature which is spilt oil spreading according to real-time water flow is weathered, the decrease ratio by oil kinds was used. These real-time data and real-time prediction information have been integrated with ESI(Environmental Sensitivity Index) and response resources and then these are provided using GIS as a whole system to make the response strategy.