• 한국조경학회지
• /
• 제19권4호
• /
• pp.29-45
• /
• 1992

This study provides the phenomenon of distributional pattern of children's parks in Kwang-Joo city and shows the procedure of distributional changes. The demand of children's parks by Dong was estimated and a gap between present provision and demand was calculated with the aid of regression residuals by Dong. This research has produced the following major conclusions : 1. The distribution of children's parks shows minor relationship to urban variable, in terms of children's population (R=0.5402). 2. There is impressive evidence that children's parks delivery is highly responsive to laws and regulations of land development.

• 음성과학
• /
• 제4권1호
• /
• pp.81-89
• /
• 1998

This paper investigates the phatic function of intonation in Russian by recording and analysing 11 female native speakers of standard Moscow Russian. This paper shows that differences in intonation pattern of a sentence are associated with differences in degree of listener's involvement in the speech. Intonation pattern of an utterance having phatic function appears to be determined by 1) the speaker's readiness to talk to evoke the listener's attention ; 2) the speaker's intention to continue the communication. Some emphasis is placed on the relationship between intonation pattern of an utterance and speaker-listener interaction.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.124-130
• /
• 2015

The purpose of this study is to investigate friction characteristics according to micro-dimple patterns. The surface texturing of micro-dimple patterns was tested to examine the friction of pin-on-disk using flat-on-flat contact geometry. The patterns of both dimple circle and groove pattern were adopted to carry out the effect of those ones. In the low loads, such as 13.8N and 27.7N, the friction coefficients of groove pattern were lower than those of dimple circle pattern. In many other comparisons of normal loads, the groove pattern had lower friction forces, which showed the effect of surface texturing. The relationship between sliding time and friction forces showed that the increase of friction forces of groove pattern were relatively lower than those of dimple pattern. In conclusion, the dimple patterns of dimple-circle pattern and groove pattern strongly contributed to reducing the friction between contacting materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.165-166
• /
• 2006

Surface pattern of tribological applications is an attractive technology of engineered surface. Therefore, friction reduction is considered to be necessary for improved efficiency of machines. This study investigated the effect of friction property fur angles of micro-scale crosshatch grooved surface pattern on bearing steel flat mated with pin-on-disk. We obtain sample which can be fabricated by photolithography process. We discuss friction property depend on an angle of cross-hatch grooved pattern. We can verify the lubrication mechanism as a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter under the lubrication condition. It was found that the friction coefficient was related to angle of crosshatch on surface, even when surface pattern was the same density.

• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.79-84
• /
• 2007

Some surface pattern of tribological application is an attractive technology of engineered surface. Therefore, friction reduction is considered to be necessary for improved efficiency of machine. This study investigated the effect of friction property for angles of micro-crosshatch groove surface pattern on bearing steel using pin-on-disk test. We obtain sample which can be fabricated by photolithography process. We discuss the friction property depend on an angle of crosshatch groove surface pattern. We can verify the lubrication mechanism as Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter under the lubrication condition. It was found that the friction coefficient was related to angle of crosshatch groove pattern on contact surface.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.110-116
• /
• 2011

The current study investigated the friction property of angle and width effect for micro-scale grooved crosshatch pattern on SKD11 steel surface against bearing steel using pin-on-disk type. The samples fabricated by photolithography process and then these are carry out the electrochemical etching process. We discuss the friction property due to the influence of a hatched-angle and a width of groove on contact surface. We could be explained the lubrication mechanism for a Stribeck curve. So It was found that the friction coefficient depend on an angle of the crosshatch on contact surface. It was thus verified that micro-scale crosshatch grooved pattern could affect the friction reduction. Also, it is play an important a width of groove to be improved the friction property. I was found that friction property has a relationship between a width and an angle for micro-grooved pattern.

• 가족자원경영과 정책
• /
• 제5권2호
• /
• pp.29-44
• /
• 2001

The purpose of this study was to analyze the relationship between urban housewive's the pattern leisure activities and leisure satisfaction by the level of informationization, leisure resoureces. A total of 287 questionnaires were used as for the final data analysis. The results could be summarized as follows: First, there were significant difference in the pattern of leisure activities according to socio- demographic and economic variables(age, eduactional attaintment, the age of lastbone child). Second, The leisure resource variables influence them. The higher leisure needs, leisure time, leisure cost is the higher degree participated in the pattern of leisure activities. Third, the higher the level of informationalization, the higher time-oriented pattern. And leisure time, leisure needs, natural-oriented pattern had an effect on leisure satisfaction.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권4호
• /
• pp.355-363
• /
• 2020

이 연구는 만성요통환자의 호흡패턴이상과 통증관의 상관관계를 알아보기 위해 실시하였다. 104명의 만성요통환자의 날숨끝 이산화탄소농도(EtCO₂)와 호흡률을 카프노그래프를 통해 측정하였고, 호흡유지시간과 Nijmegen Questionnaire, 가슴우리 움직임거리, 시각적사상척도를 추가로 평가하였다. Pearson's 검사로 상관관계를 분석하였으며, 결과는 EtCO₂와 BHT, 가슴우리 움직임거리에서 통계적으로 유의한 상관관계를 보였으며(r=.302, r=.281)(p<.01), RR과 VAS에서 낮은 음의 상관관계(r=-.253,-.200)(p <.05)를 보였다. RR과 NQ에서도 유의한 상관관계를 보였으며(r=.237)(p<.05). 가슴우리 움직임거리와 VAS사이에서는 낮은 음의 상관관계를 보였다(r=-.370)(p<.01). 가슴 호흡과 가로막호흡 사이의 EtCO₂, RR, BHT, 가슴우리 움직임거리, 그리고 VAS에서 통계적으로 유의한 차이가 있었으며(p<.05), NQ에서는 유의한 차이가 없었다(p>.05). 만성요통환자의 EtCO₂, BHT, 가슴우리움직임거리, RR, 그리고 VAS 사이에는 상관관계가 있었다. 또한, RR과 NQ, 흉부 소풍과 VAS 사이에는 상관관계를 보였다. 결과적으로 호흡패턴이상과 통증 사이에는 밀접한 관계가 있었으며, 가슴호흡과 가로막호흡의 비교에서 EtCO₂, RR, BHT, 가슴우리 움직임거리 및 VAS에서 유의한 차이가 있었다. 이것은 만성요통환자의 재활 및 통증 관리에서 호흡패턴중재가 기초자료로 사용될 수 있을 것으로 사료된다.

• 대한치과교정학회지
• /
• 제49권3호
• /
• pp.170-180
• /
• 2019

Objective: The purpose of this study was to investigate the relationship between the facial skeletal patterns and the shape of the mandibular symphysis in adults with malocclusion by using a structural equation model (SEM). Methods: Ninety adults who had malocclusion and had records of facial skeletal measurements performed using cone-beam computed tomography were selected for this study. The skeletal measurements were classified into three groups (vertical, anteroposterior, and transverse). Cross-sectional images of the mandibular symphysis were analyzed using generalized Procrustes and principal component (PC) analyses. A SEM was constructed after the factors were extracted via factor analysis. Results: Two factors were extracted from the transverse, vertical, and anteroposterior skeletal measurements. Latent variables were extracted for each factor. PC1, PC2, and PC3 were selected to analyze the variations of the mandibular symphyseal shape. The SEM was constructed using the skeletal variables, PCs, and latent variables. The SEM showed that the vertical latent variable exerted the most influence on the mandibular symphyseal shape. Conclusions: The relationship between the skeletal pattern and the mandibular symphysis was analyzed using a SEM, which showed that the vertical facial skeletal pattern had the highest effect on the shape of the mandibular symphysis.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권4호
• /
• pp.393-402
• /
• 2000

UML은 OMG에 의해서 표준 객체지향 모델링 언어로 승인 받았다. 그러나, UML을 지원하는 몇몇의 CASE 도구들이 생성한 C++ 코드는 1대 n 관계나 aggregation 관계의 의미를 정확히 반영하지 못하고 있다. 또한, 상용 CASE 도구들이 하나의 UML 클래스 다이어그램에서 너무 많은 프로그래밍 언어를 지원하기 때문에, 그들은 C++언어가 가지는 특징을 효율적으로 지원하지 못하고 있다. 제안된 C++코드 생성기는 1대 n의 관계, aggregation 관계, 코드 패턴(code pattern), 디자인 패턴(design pattern)을 지원한다.본 논문에서는 UML 클래스 다이어그램 기반의 효율적인 C++ 코드 생성기의 설계와 구현에 대하여 기술한다.