• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1589-1596
• /
• 2010

In this paper, we propose the method that reduce computational complexity for intermode decision using CBP(coded block pattern) and coded information of colocated-MB(macro block). Proposed method classifies MB into best-CBP and normal-CBP according to the characteristics of CBP. On best-CBP, it eliminates the computation for $8{\times}8$ mode on intermode decision process because the probability for SKIP mode and M-Type mode is 96.3% statistically. On normal-CBP, it selectively eliminates the amount of computation for bit-rate distortion cost, because it uses coded information of colocated-MB and motion vector cost in deciding SKIP mode and M-Type mode. The simulation results show that the proposed method reduces total coding time to 58.44% in average, and is effective in reducing computational burden in videos with little motion.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.155-167
• /
• 2004

In this paper, the inelastic buckling behavior of the beam under uniform bending was investigated using the energy-based method, which can tackle problems in fourth order eigenvalue. The pattern of residual stress was not available to satisfy the I-sections manufactured in Korea. however; therefore, the well-known polynomial and simplified pattern of residual stress was adopted in this study. The inelastic lateral-distortional buckling behavior of the beam with I-sections manufactured in Korea was investigated. The study was then extended to the inelastic lateral-torsional buckling of the beam by minimizing the out-of-plane web distortion. The inelastic lateral-torsional buckling results obtained in this paper were compared with the prediction of allowable bending stress given in the Korean steel designers' manual (1995). Results showed that the importance of inelastic lateral-distortional buckling did not arise for beams under uniform bending. Likewise, the design method in KSDM (1995) was proven to bo too conservative for intermediate and short spans of beams without intermediate bracing.

• Journal of Korea Multimedia Society
• /
• v.7 no.3
• /
• pp.327-339
• /
• 2004

In this paper, we propose a new watermark algorithm for halftone images using iterative error minimizing method. In the proposed method, watermark bits are hidden at pseudo-random locations within a halftone image. To remove the distortions due to the inserted watermark bits and increase the invisibility of watermark, an iterative error minimizing technique is used. We define the halftoning error is defined as the difference between the original grayscale image and HVS-filtered printed halftone image. Then we iteratively find the pixel pattern with minimum halftoning error and displace the original pixel pattern with it. In order to be robust to geometrical modification like cropping or rotation, we insert the same watermark periodically into halftone images. Experiments using printed and scanned images show that the proposed method is a robust method to the geometrical modification and to hide the large amount of data within a halftone image without noticeable distortion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3617-3624
• /
• 2013

Screen inspection system applied vision and laser scan technology which detect foreign materials caused fuel rod to be damaged, and which inspect fuel rod damage, bowing, distortion and grid damages, was developed to secure reliability and reproductivity of inspection method for nuclear fuel assembly during outage. In further, datum of inspection results will be continuously monitored and given understand the pattern of bowing and distorting for fuel assembly in reactor. Understanding of the pattern will be key technical information to avoid grid demage might be happened during refueling outage and provides important data base for safe operation of nuclear power plant in Korea and world wide.

• Journal of Korea Multimedia Society
• /
• v.13 no.7
• /
• pp.991-999
• /
• 2010

In this paper, we propose a fast motion estimation algorithm for video encoding. Conventional fast motion estimation algorithms have a serious problem of low prediction quality in some frames. However, full search based fast algorithms have low computational reduction ratio. In the paper, we propose an algorithm that significantly reduces unnecessary computations, while keeping prediction quality almost similar to that of the full search. The proposed algorithm uses distribution probability of motion vectors and adaptive search patterns and block matching criteria. By taking different search patterns and error criteria of block matching according to distribution probability of motion vectors, we can reduces only unnecessary computations efficiently. Our algorithm takes only 20~30% in computational amount and has decreased prediction quality about 0~0.02dB compared with the fast full search of the H.264 reference software. Our algorithm will be useful to real-time video coding applications using MPEG-2 or MPEG-4 AVC standards.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.137-143
• /
• 2008

The spherical glasses lenses are typically classified into two groups such as (+) diopter lens and (-) diopter lens by the refractive power index. The thermal deformation of a lens is occurred by external heat source and is changed respected to the diopter of a lens. In this paper, the thermal deformation of spherical glasses lenses were quantitatively measured by using ESPI (electronic speckle pattern interferometry) which has an advantage that the non-contact, non-destructive and precise deformation measurement is available due to the coherency characteristic. The temperature changes were measured by IR camera. It makes experiments over 14 types of the plastic glasses lenses. From the results, it was confirmed that the larger diopter lens showed the less thermal deformation in case of the (+) diopter lens. On the other hand, the thermal deformation of the (-) diopter lens was measured with uniform pattern when the same temperature changes were applied. Also, it was found that the thermnal deformation of the (+) diopter lens is less than that of the (-) diopter lens. Therefore, it is expected that when the thermal deformation is occurred to the various types of the lens, the variation of the focal length caused by the thermal distortion of a lens would be measured quantitatively.

• The International Journal of Costume Culture
• /
• v.2 no.2
• /
• pp.80-96
• /
• 1999

This research focused on pattern adjustments of the stable knit garment for women. Fourteen different types of the knitted fabrics by 12 gauge, computerized flat bed machines were cut in as one half of the torso front, one half of the torso back, and one side of the sleeves for each of them. Guidelines such as the center front, the center back, the armhole, the bust-line, the waistline, the hip-line the hemline were basted on the torso patterns in the knitted fabrics. Also the grain-line, the elbow-line, and the hemline were basted on the one side of the sleeves in the same as above knitted fabrics. The torso patterns in the knitted fabrics were exhibited on the dress-forms on top of the torso patterns in Muslin, which also have the same guidelines drawn on. The distances between the guidelines on Muslin and those on the knitted fabrics for each set of the sample fabrics were measured every three days for two weeks. The fabric properties of the fourteen knitted fabrics such as fiber contents, stitch density both in the wale and course directions, weight, thickness, stretch & recovery, residual shrinkage, relaxation and drapability were laboratory tested for how these were related to finished appearance of 12 gauge, computerized flat knit garments and also in order to prove the fourteen knitted fabrics fall to a category of such as the stable knit. The results from the investigation revealed that six fabric properties such as stitch density, thickness, stretch recovery, residual shrinkage and relaxation were not so much significant factors as weight and drapability. In conclusion, fabric weight, and drapability of the fabric resulting from fiber contents were the cause of final appearance distortion of garment. When adapting patterns for stabilized, 12 gauge, computerized flat knitted fabrics, the fiber contents of the fabrics should be taken into consideration to reduce the production cost and produce better-fit garments.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.49-55
• /
• 2010

Purpose: The purpose of this study was to preliminarily evaluate the influence of diabetes mellitus (DM) on periodontal tissue without establishment of periodontitis. Methods: Seven-week-old db/db mice were used for the diabetic experimental group and systematically healthy mice of the same age were used as controls. After 1 week of acclimatization, the animals were sacrificed for hard and soft tissue evaluation. The pattern of bone destruction was evaluated by stereomicroscope evaluation with alizarin red staining and radiographic evaluation by microscopic computerized tomography images. Histological evaluation was performed with hematoxylin and eosin stain for evaluation of soft tissue changes. Results: In both stereomicroscope evaluation and radiograph image analysis, aggressive form of bone destruction was observed in diabetic animals when compared to the systematically healthy controls. In histological evaluation, apical migration of junctional epithelium with slight inflammatory cell infiltration was observed with disarrangement of connective tissue fibers. Conclusions: Within the limits of this study, diabetic animals presented distortion in periodontal attachment and an aggressive bone loss pattern when compared to the healthy controls, suggesting that DM has an independent effect on periodontal tissue destruction irrespective of the presence or absence of periodontal disease.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.355-360
• /
• 2017

This study, which was begun in order to create a metal molding by using lines, a basic element of design, examined various characteristics and concept of line and the beauty of lines based on previous research on the subject. The result showed that formative interpretation of lines largely depends on intentional expression by using thickness and rhythm of lines. In order to obtain a metal molding that provides both visual freedom and beauty, rather than the conventional formative expression of lines, I used red copper plate and Phosphor bronze line for creating a pattern based on transformation and repetition of lines and an artwork based on the pattern. The result was not only a creation of a plane but the senses of three-dimension, speed, and unity in the overall shape. Further research will need to be conducted regarding formative interpretation of lines and emotional and intrinsic beauty through expression of lines.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.103-113
• /
• 2020

The Gaya Period is the period in which the nations of Gaya had existed in the Gimhae area. The term 'The Period of the Three Nations', which is widely used, is inappropriate because in ancient Korea, Gaya also existed besides Goguryeo, Baekje and Silla. This term should be corrected for the accurate reconstruction of the history of ancient Korea. Of course, the term 'The Gaya Period' cannot replace 'The Period of the Three Nations'. It just means the period in which the nations of Gaya existed. The Gaya Period refers to the period of about 600 years from about the first century, in which several nations of Gaya began to appear in the Gyeongsangnamdo area, through the falls of Daegarak of Kimhae in 532 A.D. and Daegaya of Goryeong in 562. When doing this, there should be no distortion of the original form of the relics. With the application of traditional techniques and excellent relics, it is believed that it helps to create the high added values by putting culture and tourism together with the development of various designs of cultural goods. To suggest possibility of scarf designs by completing protype from idea scatch.