• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.410-421
• /
• 2018

The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men's Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.256-267
• /
• 2013

This study is conducted to improve the fitness of Air Force winter service uniforms pants through the development of a pants pattern drafting method and automatic pattern drafting program for mass customization. The initial study pattern drafting method is formed through an analyses of 4 kinds of conventional pants pattern drafting methods for education and 3 kinds of conventional pants patterns of Air Force apparels. The initial study pattern drafting method is converted into the final study pattern drafting method after twice conducting a wearing test. To verify the final study pants pattern, a motion adaptability evaluation, an ease amount evaluation and an appearance evaluation are conducted. The results of the final study patterns were better than conventional winter service uniforms in the motion adaptability evaluation and the appearance evaluation. However, the results show similar values between the final study patterns and conventional winter service uniform patterns in the ease amount evaluation. An automatic pattern drafting program was developed based on the final study pattern drafting method. The program allowed the achievement of customized pants patterns through the placement of customer body sizes into the size input window. It also provided two kinds of ease amount and two kinds of waist belt level options.

• The Research Journal of the Costume Culture
• /
• v.20 no.3
• /
• pp.330-346
• /
• 2012

The purpose of this study is to link traditional patterns to modern clothing. Of all the traditional patterns, the cloud pattern was chosen for use during the development of a modern one-piece dress design. This study is based upon document searches, including research papers. Through these searches, it investigates the symbolic meaning, historical change, and formation of the cloud pattern. Based on this investigation, the study attempts to modernize the cloud pattern and apply the modernized patterns to the design of a one-piece dress. The design procedure includes three sub-processes: selection, arrangement, and color-scheme. The selection process was divided in two: first, the original form of the cloud pattern was hand-drawn using tracing paper: second, the form of the pattern was edited using Adobe Photoshop. The arrangement of the pattern was made through the checklist conception method, containing the following functions: expand, reset, repeat, and overlap. For the color-scheme of the pattern, Roy Lichtenstein's(1923~1997) work was selected, and the colors in his work were adopted when dyeing the rest of the one-piece dress as well as the cloud features. In conclusion, six modern designs of the one-piece dress were created by using one of Korea's traditional patterns - the cloud pattern. Therefore, this study can offer invaluable suggestions for multifaceted research on how to come up with design concepts which apply Korea's traditional patterns to clothing design.

• Journal of Fashion Business
• /
• v.26 no.5
• /
• pp.36-48
• /
• 2022

This study aims to analyze the patterns made with knitted jacquard and intarsia techniques to provide essential data to help plan different knitwear designs using the techniques and patterns. Based on approximately 3,000 jacquard and intarsia knitwear published in the four significant womenswear collections over the past decade, eight main pattern types were classified, and each characteristic was analyzed. Firstly, it is a logo and symbol type pattern that appears mainly as a means of emphasizing a brand. Secondly, it is a traditional pattern with settled patterns from the past to the present. Third, it is a geometric pattern that appears both typically and atypically in various forms. Fourth, an abstract pattern type does not show a precise form or motif. Fifth, it is a colorful and diverse flower and plant pattern. Sixth, it is a landscape pattern that expresses nature and living space. Seventhly, it is an animal pattern type that expresses the appearance of an animal or the shape of the. Finally, it is a caricature pattern type using characters and various cartoonish motifs. Based on the analysis results of this study, creative and diverse design development of Jacquard and Intarsia knitwear and development of the knitwear market will take place.

• Industrial Engineering and Management Systems
• /
• v.11 no.3
• /
• pp.266-275
• /
• 2012

The rise of crowdsourcing and web 2.0 opens plenty of opportunities for companies who want to exploit external sources of ideas for internal innovation. Utilization of crowdsourcing for product design and development has been attracting the attention of both enterprises and researchers. Many cases of implementation of crowdsourcing for product design and development such as: Threadless, FIAT Mio, Lego online Factory, etc., have made crowdsourcing a promising alternative source of innovative power. Although crowdsourcing gained access due to improved Internet access and web 2.0, it is little understood how the crowd, with respect to participation, behaves for any crowdsourcing project. To investigate this, we conducted an experiment on a real crowd of engineering related individuals to figure out the crowd participation pattern for various product design and development phases of a new product development project. The experiment results give a quantitative view of the participation of the crowd (i.e., crowd participation pattern) in various phases of a product design and development process that utilizes crowdsourcing, provide a practical guidance for companies to harness the power of the crowd sensibly, and provide experimental data for further research in this field.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.11
• /
• pp.907-918
• /
• 2014

In this study for the prediction of 3D underwater radiated noise pattern, a comparison between the proposed method(DHIE, Discrete Helmholtz Integral Equation) and the 3D underwater radiated noise calculation results using the measurement of near-field acoustic pressure data is performed. The near-field acoustic pressure in water is measured for the calculation of the far-field radiated noise pattern and the far-field acoustic power. Also the vibration field of the underwater structure is measured in simultaneously. Using the total far-field acoustic power and the vibration field on the surface of the structure, the proposed method(DHIE) can predict the underwater radiated noise pattern of the far-field The predicted results show the reasonable agreement within about 5dB comparing with the experiment result.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2014

Objectives The purpose of this study is analyzing internal research trends of oriental obesity pattern identification in korean literature based on obesity pattern identification questionnaires, development and application of Pattern Identification System to help solve problems of future researches. Methods 6 Korean databases were searched for articles of oriental obesity pattern identification, irrespective of publication year and 13 studies were reviewed. An analytical method such as descriptive statistics and an actual number and percentage was used. Results We collected 13 studies. 4 studies were published in 2012 and 2008, the highest number of studies. 7 Clinical studies were the major research method. The Studies were classified according to the characteristics and design. 5 studies were about research of analysis and improvement of oriental obesity pattern identification questionnaire, the most number of studies. 4 studies were about research of observational studies in clinical on obesity pattern identification. 3 studies were about research of intervention studies in clinical on obesity pattern identification and 1 study was about clinical practice recommendation. Conclusions Establishment of obesity pattern identification system and its clinical application could lead to standardizing obesity pattern identification and clinical practice guideline. Applied on other diseases, obesity pattern identification system could also lead to improving treatment rate, contributing to the development of clinical practice guidelines and academic field of research.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.223-235
• /
• 1998

A dedicated CAM(Computer-Aided Manufacturing) system has been developed, which generated tool-path to machine Styrofoam stamping die-patterns in Chrysler Corporation. A previous process to build die-patterns was to "stick build" the pattern, in which stock is cut & glued together, and then the NC machining of part-surface shape completes building a Styrofoam die-pattern. The current process utilizes the developed CAM system, and almost removes the manual work, consequently reduces the overall lead time. The paper presents the overall system structures, tool-path generation, and some features of Styrofoam pattern machining.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.293-302
• /
• 2005

The emotion and culture of an age are reflected through several mediums. The special quality and generality are discovered through household utensils used in everyday life specially. This paper was intended as proceeding study for brand development with national empathic relationship. In this article, we were here concerned with symbolism and features for stories of traditional pattern on ancestral common household utensils, and considered about development possibility by brand of tradition pattern. As analysis for symbolism of traditional pattern, re-sorting and classifying pattern, meaning, symbol and stories of pattern based on 'Blessing notion' were set. It was found from the analysis that meaning and symbol of traditional pattern were set up and stories for them were excerpted. This study defines tradition pattern classified based on 'Blessing notion' as '8 Blessing pattern', and investigated development possibility and derivative value of it. We discovered through this study that 'Blessing patterns' function as communicator, have 4 abilities in sympathy with brand paradigm, and have 6 elements of brand identity. Furthermore, 'Blessing Patierns' have some derivative functions; cognitive intension, expression, loyalty, differentiation and symbol. This research will become basis of study for brand development having 'Empathic relationship' and foundation of 'Blessing brand' that is available to be umbrella and super brand. A further direction of this study will be to make 'Blessing brand series' and to create culture of it. We hope Korean brand market goes a step further through our studies

• Molecules and Cells
• /
• v.26 no.4
• /
• pp.338-343
• /
• 2008

An embryonic stem cell is a powerful tool for investigation of early development in vitro. The study of embryonic stem cell mediated neuronal differentiation allows for improved understanding of the mechanisms involved in embryonic neuronal development. We investigated expression profile changes using time course cDNA microarray to identify clues for the signaling network of neuronal differentiation. For the short time course microarray data, pattern analysis based on the quadratic regression method is an effective approach for identification and classification of a variety of expressed genes that have biological relevance. We studied the expression patterns, at each of 5 stages, after neuronal induction at the mRNA level of embryonic stem cells using the quadratic regression method for pattern analysis. As a result, a total of 316 genes (3.1%) including 166 (1.7%) informative genes in 8 possible expression patterns were identified by pattern analysis. Among the selected genes associated with neurological system, all three genes showing linearly increasing pattern over time, and one gene showing decreasing pattern over time, were verified by RT-PCR. Therefore, an increase in gene expression over time, in a linear pattern, may be associated with embryonic development. The genes: Tcfap2c, Ttr, Wnt3a, Btg2 and Foxk1 detected by pattern analysis, and verified by RT-PCR simultaneously, may be candidate markers associated with the development of the nervous system. Our study shows that pattern analysis, using the quadratic regression method, is very useful for investigation of time course cDNA microarray data. The pattern analysis used in this study has biological significance for the study of embryonic stem cells.