• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.1-10
• /
• 2009

The characteristics of fruit ripening and cell wall modifications of two oriental pear fruits were compared during storage. The loss of fresh weight was lower in 'Pingguoli' than 'Niitaka', probably due to the difference in wax accumulation and skin structure. 'Pingguoli' produced much higher amount of ethylene and showed climacteric ripening pattern, but this response was not found in 'Niitaka'. A significant difference in soluble pectin contents was found, thus, the amount of water soluble pectins were much higher in 'Niitaka' at harvest but this difference was not significant at later stage of storage. A severe loss of water soluble pectins in 'Niitaka' was confirmed whereas a similar tendency was not found in CDTA soluble ones. Even the amount of $Na_2CO_3$ soluble pectins was relatively low, 'Pingguoli' contained approximately 2 times higher than 'Niitaka' and both cultivars showed an increasing tendency in $Na_2CO_3$ soluble polymers at later stage of storage. No significant difference in alkali soluble polysaccharides (hemicelluloses fraction) was found between both cultivars. There was a significant change in gel filtration profiles regardless of cultivars, especially in water soluble pectins resulting from severe depolymerization probably due to degradation of higher molecular weight pectins and loss of their side chains. In gel filtration profiles of $Na_2CO_3$ soluble pectins, neutral sugars were evenly distributed regardless of molecular size of pectic polymers but the decrease of high molecular weight fraction was found. In comparison of alkali soluble polymers, a similar trend was found, that is, there was no difference in gel filtration profiles but 'Niitaka' seemed to have longer side chains in alkali soluble polysaccharides in both 4% and 24% of KOH soluble fractions.

• Asia pacific journal of information systems
• /
• v.24 no.4
• /
• pp.577-610
• /
• 2014

Although service innovation is not a new concept, innovation research in general tends to focus on technological innovation by manufacturing firms. With this view, innovation studies focus on product(e.g., goods) and process(e.g., product systems) innovation, ignoring service innovation and its inherent opportunities. Since major economy has been transformed to service economy, service innovation is considered a new effective way to sustain and gain a competitive advantage. Service innovation is no longer regarded merely as a side activity to product innovation; it has become a main research topic in its own right, accompanied by an increasing focus on services. While the number of service innovation studies has increased dramatically in the past 30 years in international research, few studies have been performed in domestic studies because domestic service innovation research began from the middle of 2000. In addition, there are no comprehensive literature reviews describing the evolution of service innovation research in both international and domestic studies because of the heterogeneities of service industry and multidiscipline characteristics of service innovation studies. To bridge this research gap, the purpose of this paper is to perform an extensive literature review and synthesis to enable a critical review of extant research on service innovation and trace its evolution, which will establish a foundation for further studies. By reviewing 169 articles (136 international papers; 33 domestic papers) published between 2000 and 2014 (in past 15 years), primarily in leading service, innovation and management information systems journals, this study analyzes the progression of service innovation research according to the four aspects such as number of studies, topics, methodologies and target industries. Overall, the view of service innovation has evolved, from a complement of traditional product innovation to a multidimensional, all-encompassing concept that entails several functions, both within and outside the firms. The results showed that domestic research still stays at the formation phase of service innovation studies although international research is in the maturity or multidimensional phase. We found increasing recent activities pertaining to service innovation, resulting from the increasing interest in services innovation across various industries and the links of new topics to the service innovation concept in both international and domestic studies. However, the main focus of service innovation research showed a different propensity between international and domestic studies: the former mainly focuses on a much more diversified pattern, emphasizing the linkages between service innovation and business strategy while the latter mainly focuses on the service innovation process(system) and service design. In addition, there are many case studies in domestic studies while many empirical studies in international studies. Domestic studies should increases the understanding of the interplay between service innovation and product innovation within manufacturing firms. Furthermore, rather than focusing on intrinsic distinctions between service innovation and product innovation, researchers should strive to develop and conceptualize service innovation in domestics studies. The present research also provides useful implications for practitioners. First, this study contributes to expand the current understanding of service innovation research by performing an extensive literature review. Second, tracing and comparing the progression and trends of service innovation research between international and domestic studies, this study showed the similarities and differences between them, which provide practical guidance on future research directions and research agenda. Third, this study performed literature review establishing the analysis system in the initial stage and using them to analyze articles, which is leading to explain the research review of service innovation more systematically and objectively. Finally, this study suggests the domestic researchers their future interests and topics of service innovation research.

• Journal of agricultural medicine and community health
• /
• v.20 no.2
• /
• pp.175-185
• /
• 1995

This study is to compare family support and mental health between the rural and the urban elderly. In order to do that I collected the data through questioning 238 people in 3 urban areas in Busan and 201 people in 9 rural areas near Daegu. The degree of their family support is 36.70 on the average in the rural area and 40.77 in the urban area. The degree of family support of urban elderly is a little higher. According to general characters between the differences of family support in both areas, in the rural area there are differences in sex, age, whether they have a spouse or not, education level, financial state, number of children, number of co living, status of co living, subjective health status, amount of pocket money and how much they are participating in leisure activity. In the urban area there are differences in sex, whether they have a spouse or not, religion, financial state, number of co living, status of co living, subjective health status, amount of pocket money, how much they are participating in leisure activity and house pattern. In the stepwise multiple regression analysis the main variables that affect degree of family support in the rural area are age, whether they have a spouse or not and financial state which account for 33% of the total variance and in the urban area are subjective health status, financial state, whether they have a spouse or not and number of co-living which account for 35%. Health status is better in the urban area(average 36.87) than in the rural area(57.42). In each item the people whose mark was more than 75%(low) have Depression 8.4%, Somatization 8.0% in the urban area and Somatization 8.5%, Depression 8.5%, Anxiety 4.0%, Phobic anxiety 4.0%, Obsessive compulsive reaction 2.5%, Hostility 2.0%, Paranoid ideation 2.0%, Psychoticism 1.5% and Interpersonal sensitivity 1.5% in the rural area. In the mental health condition, on the basis of 4 points in both areas, the average is Somatization(rural : 1.69, urban : 1.51), Depression (rural : 1.64, urban : 1.37) and Obsessive compulsive reaction(rural : 1.33, urban : 0.99). According to the differences between mental health conditions by general characters, in the rural area the differences are presented in sex, age, whether they have a spouse or not, religion, education level, financial state, number of children, status of co living, subjective health status, amount of pocket money and how much they are participating in leisure activity, in the urban area the differences are presented in sex, whether they have a spouse or not, religion, financial state, number of co living, status of co living, subjective health status, house pattern, amount of pocket money and how much they are participating in leisure activity. In the stepwise multiple regression analysis the main variables that affect mental health condition in the rural are family support degree subjective health status, religion sex, age and financial state which account for 43% of the total and in the urban area are family support degree, subjective health status and financial state which account for 51%. In the matter of family support degree and mental health condition the rural area was -0.4555, of urban area was -0.6446. The rural area that has a high percentage in family support degree and mental health condition Depression was -0.5036, Psychoticism was -0.4265 in the urban area Psychoticism was -0.6452, Depression was -0.5955. Family support has a great influence on mental health of old people and family support and mental health condition can be different according to living area. So in their problems nursing intervention through family and nursing strategies according to living area should be established.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.12
• /
• pp.1589-1598
• /
• 2008

The objective of this study was to investigate the effect of obesity on health by analyzing the factors which are related to obesity through the questionnaires on the dietary pattern, nutrient intake and physical measurements. The subjects, 419 college women aged 20 to 24 year-old, were randomly selected from Seoul and data were collected during March to May, 2008 and classified as under underweight, normal weight, and obesity groups according to BMI. However, weight, skeletal muscle mass, body fat mass, fat free mass, percentage of body fat, and waist to hip ratio showed significant differences among all the groups (p<0.05). In the obese group, 77.8% ate fat-rich foods such as galbi and samgyopsal more than two times per week, 66.7% ate vegetables other than kimchi (p<0.05) as compared to the underweight and normal groups by mini dietary assessment (p<0.05). The cholesterol intakes of the underweight, normal weight, and obese groups were $164.67{\pm}114.52mg/dL$, $143.31{\pm}99.58mg/dL$, and $121.92{\pm}54.91mg/dL$, respectively, and the obese group had a significantly lower intake than the other groups (p<0.05). The serum total cholesterol levels of the underweight, normal, and obese groups were $177.04{\pm}26.36mg/dL$, $189.46{\pm}29.05mg/dL$, and $170.00{\pm}12.75mg/dL$, respectively, and the obese group showed lower total cholesterol level than the other groups (p<0.05). The triacylglycerol level of the obese group ($132.00{\pm}64.60mg/dL$) was significantly higher than the other two groups (p<0.05). The HDL-cholesterol levels of the underweight, normal weight, and obese groups were $51.92{\pm}9.39mg/dL$, $59.20{\pm}13.53mg/dL$, and $43.00{\pm}8.98mg/dL$, respectively, showing that the obese subjects had significantly lower HDL-cholesterol levels as compared to the subjects in the other groups (p<0.05). The HDL-C/LDL-C ratios of the underweight ($0.52{\pm}0.45$) and normal weight ($0.59{\pm}0.23$) groups were higher than the ratio of the obese group ($0.41{\pm}0.06$). Total cholesterol were positively correlated with LDL-cholesterol (r=0.768, p<0.01), but triacylglycerol were adversely correlated with HDL-cholesterol. In conclusion, our results show that college-aged women in Seoul should be encouraged to amend their overall dietary habits, make a dietary plan that fits their individual needs, and maintain an effective exercise schedule.

• Applied Biological Chemistry
• /
• v.7
• /
• pp.92-104
• /
• 1966

For the purpose of the better dietary management and to empahsize of importance in nutrition education for 552 students at the dormitories, College of Agriculture, Seoul National University, the dietary survey was conducted for each consecutive seven days, from March 7th to 13th at the boy's dormitory, from March 14th to 20th at the girl's dormitory, respectively. In comparison the average caloric and nutrient intake per caput per day at the both, girl's and boy's dormitory with the recommended dietary allowances for age of 25, the intake of calories and all nutrients except riboflavin were over the allowances for the boy, while the caloric intake by the girl was considerablly below the allowance. But it is meant that only 150 calories was actually deficient in comparison with the figure of the average energy consumption determined for the girls at the dormitory of the Sook-myung Woman's University, whose pattern of living was quite similar to those of the girls at this college. Except iron and ascorbic acid, all other nutrients were deficient for the girls. The calories in the form of protein of a diet taken by the boy was 12.9% and that by the girl was 12.8%. Protein quality of the diet taken by boy scored 70 while that by the girl scored 79. NDp Cal% of the diet taken by the boy was 7 and that by the girl was figured out to be 8. Therefore, calculated reference protein taken by the boy was 55.8 grams and that by the girl was 36.9%. Though it is generally recommended that at least 1/3 of the protein should come from animal sources, it was apparent by this survey that providing 1/5 of the protein from animal sources with remaining part of high quality vegetable protein foods in the adequate mixed diet would give satisfactory results for both girl and boy students. This was clearly demonstrated by the recommended reference protein and NDp Cal% met. Significant difference between boys and girls in the average consumption of seasonings was found. In consumption per day of seasonings, boy used 1.5 grams of red pepper powder which means they used 15 times more of red pepper than girls did. Kochujang was used 13 grams by boy-students which was as high as 21 times of that of the girl. Total salt intake by the boy was 34 grams while the girl consummed 23 grams. It is obviously recognized that boys prefer more peppery and salty flavor than girls do. To reduce the amount of protein consummed and to improve the quality of protein food, increase of riboflavin rich food and increase of fat intake in place of grain intake are recommendable to the boy. For the girl's diet, consumption of grains, particularly more intake of barley mal· be recommendable to meet the B group of vitamins allowances as well as the caloric allowance. The use of more servings of yellow green vegetables is needed to the girl.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.29-45
• /
• 2012

Bond rating is regarded as an important event for measuring financial risk of companies and for determining the investment returns of investors. As a result, it has been a popular research topic for researchers to predict companies' credit ratings by applying statistical and machine learning techniques. The statistical techniques, including multiple regression, multiple discriminant analysis (MDA), logistic models (LOGIT), and probit analysis, have been traditionally used in bond rating. However, one major drawback is that it should be based on strict assumptions. Such strict assumptions include linearity, normality, independence among predictor variables and pre-existing functional forms relating the criterion variablesand the predictor variables. Those strict assumptions of traditional statistics have limited their application to the real world. Machine learning techniques also used in bond rating prediction models include decision trees (DT), neural networks (NN), and Support Vector Machine (SVM). Especially, SVM is recognized as a new and promising classification and regression analysis method. SVM learns a separating hyperplane that can maximize the margin between two categories. SVM is simple enough to be analyzed mathematical, and leads to high performance in practical applications. SVM implements the structuralrisk minimization principle and searches to minimize an upper bound of the generalization error. In addition, the solution of SVM may be a global optimum and thus, overfitting is unlikely to occur with SVM. In addition, SVM does not require too many data sample for training since it builds prediction models by only using some representative sample near the boundaries called support vectors. A number of experimental researches have indicated that SVM has been successfully applied in a variety of pattern recognition fields. However, there are three major drawbacks that can be potential causes for degrading SVM's performance. First, SVM is originally proposed for solving binary-class classification problems. Methods for combining SVMs for multi-class classification such as One-Against-One, One-Against-All have been proposed, but they do not improve the performance in multi-class classification problem as much as SVM for binary-class classification. Second, approximation algorithms (e.g. decomposition methods, sequential minimal optimization algorithm) could be used for effective multi-class computation to reduce computation time, but it could deteriorate classification performance. Third, the difficulty in multi-class prediction problems is in data imbalance problem that can occur when the number of instances in one class greatly outnumbers the number of instances in the other class. Such data sets often cause a default classifier to be built due to skewed boundary and thus the reduction in the classification accuracy of such a classifier. SVM ensemble learning is one of machine learning methods to cope with the above drawbacks. Ensemble learning is a method for improving the performance of classification and prediction algorithms. AdaBoost is one of the widely used ensemble learning techniques. It constructs a composite classifier by sequentially training classifiers while increasing weight on the misclassified observations through iterations. The observations that are incorrectly predicted by previous classifiers are chosen more often than examples that are correctly predicted. Thus Boosting attempts to produce new classifiers that are better able to predict examples for which the current ensemble's performance is poor. In this way, it can reinforce the training of the misclassified observations of the minority class. This paper proposes a multiclass Geometric Mean-based Boosting (MGM-Boost) to resolve multiclass prediction problem. Since MGM-Boost introduces the notion of geometric mean into AdaBoost, it can perform learning process considering the geometric mean-based accuracy and errors of multiclass. This study applies MGM-Boost to the real-world bond rating case for Korean companies to examine the feasibility of MGM-Boost. 10-fold cross validations for threetimes with different random seeds are performed in order to ensure that the comparison among three different classifiers does not happen by chance. For each of 10-fold cross validation, the entire data set is first partitioned into tenequal-sized sets, and then each set is in turn used as the test set while the classifier trains on the other nine sets. That is, cross-validated folds have been tested independently of each algorithm. Through these steps, we have obtained the results for classifiers on each of the 30 experiments. In the comparison of arithmetic mean-based prediction accuracy between individual classifiers, MGM-Boost (52.95%) shows higher prediction accuracy than both AdaBoost (51.69%) and SVM (49.47%). MGM-Boost (28.12%) also shows the higher prediction accuracy than AdaBoost (24.65%) and SVM (15.42%)in terms of geometric mean-based prediction accuracy. T-test is used to examine whether the performance of each classifiers for 30 folds is significantly different. The results indicate that performance of MGM-Boost is significantly different from AdaBoost and SVM classifiers at 1% level. These results mean that MGM-Boost can provide robust and stable solutions to multi-classproblems such as bond rating.

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.27-28
• /
• 2014

Beauveria bassiana (Cordycipitaceae, Hypocreales, Ascomycota) is an anamorphic fungus having a potential to be used as a biological control agent because it parasitizes a wide range of arthropod hosts including termites, aphids, beetles and many other insects. A number of bioactive secondary metabolites (SMs) have been isolated from B. bassiana and functionally verified. Among them, beauvericin and bassianolide are cyclic depsipeptides with antibiotic and insecticidal effects belonging to the enniatin family. Non-ribosomal peptide synthetases (NRPSs) play a crucial role in the synthesis of these secondary metabolites. NRPSs are modularly organized multienzyme complexes in which each module is responsible for the elongation of proteinogenic and non-protein amino acids, as well as carboxyl and hydroxyacids. A minimum of three domains are necessary for one NRPS elongation module: an adenylation (A) domain for substrate recognition and activation; a tholation (T) domain that tethers the growing peptide chain and the incoming aminoacyl unit; and a condensation (C) domain to catalyze peptide bond formation. Some of the optional domains include epimerization (E), heterocyclization (Cy) and oxidation (Ox) domains, which may modify the enzyme-bound precursors or intermediates. In the present study, we analyzed genomes of B. bassiana and its allied species in Hypocreales to verify the distribution of NRPS-encoding genes involving biosynthesis of beauvericin and bassianolide, and to unveil the evolutionary processes of the gene clusters. Initially, we retrieved completely or partially assembled genomic sequences of fungal species belonging to Hypocreales from public databases. SM biosynthesizing genes were predicted from the selected genomes using antiSMASH program. Adenylation (A) domains were extracted from the predicted NRPS, NRPS-like and NRPS-PKS hybrid genes, and used them to construct a phylogenetic tree. Based on the preliminary results of SM biosynthetic gene prediction in B. bassiana, we analyzed the conserved gene orders of beauvericin and bassianolide biosynthetic gene clusters among the hypocrealean fungi. Reciprocal best blast hit (RBH) approach was performed to identify the regions orthologous to the biosynthetic gene cluster in the selected fungal genomes. A clear recombination pattern was recognized in the inferred A-domain tree in which A-domains in the 1st and 2nd modules of beauvericin and bassianolide synthetases were grouped in CYCLO and EAS clades, respectively, suggesting that two modules of each synthetase have evolved independently. In addition, inferred topologies were congruent with the species phylogeny of Cordycipitaceae, indicating that the gene fusion event have occurred before the species divergence. Beauvericin and bassianolide synthetases turned out to possess identical domain organization as C-A-T-C-A-NM-T-T-C. We also predicted precursors of beauvericin and bassianolide synthetases based on the extracted signature residues in A-domain core motifs. The result showed that the A-domains in the 1st module of both synthetases select D-2-hydroxyisovalerate (D-Hiv), while A-domains in the 2nd modules specifically activate L-phenylalanine (Phe) in beauvericin synthetase and leucine (Leu) in bassianolide synthetase. antiSMASH ver. 2.0 predicted 15 genes in the beauvericin biosynthetic gene cluster of the B. bassiana genome dispersed across a total length of approximately 50kb. The beauvericin biosynthetic gene cluster contains beauvericin synthetase as well as kivr gene encoding NADPH-dependent ketoisovalerate reductase which is necessary to convert 2-ketoisovalarate to D-Hiv and a gene encoding a putative Gal4-like transcriptional regulator. Our syntenic comparison showed that species in Cordycipitaceae have almost conserved beauvericin biosynthetic gene cluster although the gene order and direction were sometimes variable. It is intriguing that there is no region orthologous to beauvericin synthetase gene in Cordyceps militaris genome. It is likely that beauvericin synthetase was present in common ancestor of Cordycipitaceae but selective gene loss has occurred in several species including C. militaris. Putative bassianolide biosynthetic gene cluster consisted of 16 genes including bassianolide synthetase, cytochrome P450 monooxygenase, and putative Gal4-like transcriptional regulator genes. Our synteny analysis found that only B. bassiana possessed a bassianolide synthetase gene among the studied fungi. This result is consistent with the groupings in A-domain tree in which bassianolide synthetase gene found in B. bassiana was not grouped with NRPS genes predicted in other species. We hypothesized that bassianolide biosynthesizing cluster genes in B. bassiana are possibly acquired by horizontal gene transfer (HGT) from distantly related fungi. The present study showed that B. bassiana is the only species capable of producing both beauvericin and bassianolide. This property led to B. bassiana infect multiple hosts and to be a potential biological control agent against agricultural pests.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.29-37
• /
• 1977

The mineralization of soil nitrogen, amino acid composition of acid hydrolizable organic nitrogen of four Korean soils were investigated in comparison with four Japanese (Hokuriku district) soils which is similar in nitrogen content but different in characteristics of clay minerals. The mineralization rate and pattern were quite different between Korean and Japanese soils; Korean soils were low in amount of mineralized nitrogen but porduced much ammonium nitrogen during the later stage of incubation. In Korean soils the ratio of acid hydrolizable nitrogen to total; especially ${\alpha}$-amino nitrogen and hydrolizable ammonium nitrogen were low while hexosamine content was considerablly high (greater than 10%) In all soils the amount of mineralized nitrogen showed significant positive correlation with ammonium nitrogen and ${\alpha}$-amino nitrogen in acid hydrolizate. The amino acid composition of acid hydrolizate of paddy soils showed higher in basic amino acids and lower in acidic amino acids than those of up land soils (humic volcanic ash soil) from both countries. Alanine content was low in Korean soils. Proline showed increasing trend with nitrogen content but aspartic acid decreasing.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.51-61
• /
• 2003

The purpose of this study was to evaluate the effects of a self-etching primer on the shear bond strength of orthodontic brackets and on the failure pattern of bracket-adhesive interfaces in dry or wet condition. Brackets were bonded to extracted human teeth according to one of three experimental protocols. In the Group P, teeth were etched with $37\%$ phosphoric acid. After the Transbond XT Primer was applied onto the etched surfaces, the brackets were bonded with Transbond XT(3M, Unitek, Monrovia, Calif) and light cured for 40 seconds. In the Group SD, a self-etching primer(3M, Unitek, Monrovia, Calif) was placed on the enamel for 3 seconds and gently evaporated with air, as suggested by the manufacturer. The brackets were then bonded with Transbond XT as in the Group P In the Group SW, artificial saliva was applied to the enamel surface for 10 seconds to allow complete hydration of the surface before application self-etching primer The brackets were then bonded following the procedures of Group SD. Each group was divided into 2 sub-groups(0.5h, 24h) according to debonding time. Shear bond strengths were measured by Instron universal testing machine. After debonding, the teeth and brackets were examined under scanning electron microscope and assessed with the adhesive remnant index. The result obtained were summarized as follows ; 1. The shear bond strengths were high enough to use clinically in all testing groups, but the shear bond strengths of Group SD and SW were significantly lower than Group P(p<0.05). 2. With respect to comparison of debonding time, 24h debonding samples exhibited heigher shear bond strength than 0.5h debonding samples in Group P, SD and SW(p<0.05). 3. In the self etching primer groups(Group SD and Group SW), there was no significant difference in mean shear bond strength between under dry and wet state(p>0.05). 4. There was a greater frequency of ARI score of 0 and 1 with the Group P. On the other hand, there was a higher frequency of ARI scores of 2 and 3 with Group SD and Group SW(p<0.05).