• Spatial Information Research
• /
• 제19권1호
• /
• pp.1-11
• /
• 2011

최근 도시지역은 국지성 호우로 인한 범람의 빈도가 증가하고 있다. 이 연구에서는 HECRAS 모형을 이용하여 중량천 수계에 대한 홍수범람모의를 수행하였다. 분석은 1m 간격의 LiDAR 자료를 기반으로, 하천 정보를 위해 HEC-GeoRAS를 이용하여 Geometry 자료를 구축하여 활용하였다. 홍수에 대한 가상시나리오를 홍수량이 100년 빈도일 경우 200년 빈도일 경우, PMF일 경우로 작성하여 침수 취약지역을 분석하였고, 이를 구역화하고 대피소까지의 대피경로를 분석하였다. 분석 결과 인구가 밀집된 시가화 지역의 면적 비율이 범람지역의 약 70%를 차지하고 있어 홍수 시 상당한 인명 및 재산피해가 예상되었다. 범람지역에서 대피소까지의 최단거리 대피경로는 평균거리 1,000m로 대피 경보에 따라 피해를 최소화 할 수 있음을 알 수 있었다. 이 연구에서 제시한 방법은 향후 도식지역의 홍수대피 계획 수립에 많은 도움이 될 것이다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.469-472
• /
• 2008

In this paper, we discuss the recent trends on the passive UHF RFID tag chip design techniques and several important system parameters. We also summarize link budget studies on both conventional and modem UHF RFID communications. The paper highlights the reverse link limited case, which has known to be the minor concern if reader continuous wave (CW) can reach the tag in sufficient level. This makes sense when the tag sensitivity is rather high (over 10-12${\mu}W$); however, since the tag chip fabrication technologies have been developed by time, the tag chip threshold levels are now less-dominant in determining link margin. If the tag limitation can be alleviated, the forward link limited case can be resolved; thus, we rather focus on the path-loss problem. Since the path-losses are still exist in both forward and reverse links, and it can be doubled while CW travels the reader-tag-reader path because forward link and reverse link are on the same distance. Consider if reader receiver sensitivity is very high in the worst case. In this case, weaken tag response (i.e., backscatters) cannot reach the level that reader receiver can process tag data; bit-error rate can be higher. Overall, backscatter levels should be high enough so that reader receiver can correctly function. After discussing link budget, we carried out practical measurements on fading effects between two circularly polarized UHF RFID antennas in a small scale area.

• 한국ITS학회 논문지
• /
• 제4권1호
• /
• pp.107-115
• /
• 2005

For effective IP based service implementation on the wireless network environments, wireless network including the ITS network have to support QoS guaranteed protocol such as a RSVP. RSVP is a resource reservation protocol for Internet environment, and its scalability makes easy to implement RSVP over the various IP transport technologies. But for the If based ITS wireless network environment, RSVP is not suitable, since by its path setup procedure characteristic. In the wireless access network for ITS service, when a mobile node moves to other domain it must perform registration procedure. But the registration procedure is time consuming steps, so if a RSVP session was already established in the previous domain, the RSYP session may be disconnected and the time to re establish a new RSVP session is long enough to cause serious packet loss. In this paper, we propose a pre-path reservation mechanism for applying the RSVP in wireless access networks for ITS. In the pre-path reservation mechanism, the resource reservation procedure occurred during a mobile node's handoff time. An access point in wireless access network performs this procedure when the mobile node attempts handoff The access point executes pre-path reservation procedure as a proxy, since the mobile node does not have IP address until the address allocation procedure is finished in a new domain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.548-551
• /
• 2004

Magnetostrictive actuators have seen increasing use in fine positioning system because it has many advantages such as friction free, resolution of ${\mu}{\textrm}{m}$ or nm scale, and powerful output force. Usually, the magnetic circuit of magnetostrictive actuator has components which are flux return path, coil, and magnetostrictive material. It is classified in two types according to existence of the permanent magnet. The magnetic circuit having optimal performances transfer magnetic field which is obtained by providing input current at coil without energy loss. This paper described mathematical model of magnetic circuit for getting design variables. The modeling equation is obtained from the relations between flux and reluctance of the magnetic equivalent circuit. Also, finite element analysis has been used to study the performance of magnetic circuit according to change of design variables such as existence and shape of the permanent magnet, flux return path etc. The modification of dimensions enables us to optimize magnetic circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
• /
• pp.149-154
• /
• 2007

The classical literature on SR motor design tends to focus on inner-rotor type motor rather than outer-rotor type motor, and dose not provide a complete procedure for configuration of outer-rotor type SR motor calculations that are also needed in every SR motors design. It is interested in the design of SR motors to shortening the magnet flux path in the iron core for reducing the iron loss. The 5 phases outer-rotor type SR Motor with short magnet flux path is introduced in this paper. For this the rotor of prototype is designed in U-form with 8 rotor poles that are in 4 U-forms from one another separate constructed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.367-370
• /
• 1998

A hybrid-integrated SAW(surface acoustic wave) douplexer including transmitter(Tx) filter, receiver(Rx) filter an dantenna terminal has been studied. The prototype duplxer was designed for CDMA system application in the 800 MHz-band. Ladder type SAW filters consisting of one port SAW resonators wer integrated on epoxy substrate to demonstrate the feasiblity of antenna duplexer. In order to perform the duplexing function, a strip line for impedance transformaton with length of .gamma./4 was inserted at rx path. The fabricted duplexer has an insertion loss of 3.0 dB at Tx path and 3.7 dB at Rx path. The attenuation has more than 40dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.43-46
• /
• 1995

Adaptive algorithms based on gradient adaptation have been extensively investigated and successfully jointed with active noise/vibration control applications. The Filtered-X LMS algorithm became one of the basic feedforward algorithms in such applications, but still is not fully understood. The error path model effect on the Filtered-X LMS algorithm has been under the investigation and some useful properties related stability has been discovered. We are interested in utilizing the fact that the model error caused by the way optimizing the error path model in a view point of convergence speed of Filtered-X LMS algorithm for pure tone noise suppression application without any performance loss at steady state.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.1433-1436
• /
• 2004

The ad hoc network is a collection of wireless mobile nodes dynamically forming a temporary network without the use of any existing network infrastructure of centralized administration. Load-Balanced Ad hoc Routing(LBAR) protocol is an on-demand routing protocol intended for delay-sensitive applications where users are most concern with packet transmission delay. Although LBAR mechanism is a novel load balancing routing protocol for ad hoc network, it has own limitation in route path maintenance phase. Therefore, in this paper, we propose Advanced Load-Balanced Ad hoc Routing(A-LBAR) that is delay-sensitive and has an efficient path maintenance scheme. The robust path maintenance scheme is maintained by considering about nodal loads all over network and misbehavior of overloaded or selfish nodes. The proposed scheme provides good performance over DSR and AODV in terms of packet delay and packet loss rate when some misbehaving nodes exist in the network.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.341-344
• /
• 2008

The complicated helical flow formed in the regenerative turbomachines is usually decomposed into a peripheral component and a circulatory component. On the basis of the momentum exchange theory, the circulatory flow plays a critical role of imparting angular momentum to the peripheral flow. Therefore, the accuracy of performance prediction is dominated by the circulatory flow modeling. Until now the circulatory flow has been accounted of a standstill flow normal to the peripheral flow. However, the circulatory path from the impeller exit to the re-entrance inlet is exposed to the adverse pressure gradient, so it would be more realistic to describe that the circulatory flow is formed on the skewed plane not perpendicular to the peripheral flow. Present study suggests new circulatory flow loss model including the effect of adverse pressure gradient and modifies the effective circulatory flow rate and circulatory pivot which were previously published.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.55-60
• /
• 2020

This study designed High impedance filter to reduce RF loss to heater heating wire and increase RF current flowing to heater ground wire. Effects such as D / R improvement and process reproducibility could be seen. In addition, RF parameter distribution optimization was possible by understanding the RF path of PE-CVD equipment using Plasma and designing filter.