• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.538-539
• /
• 2008

전력 산업은 대규모 투자가 필수적인 산업이라 자연 독점으로 남아 있게 되는 경우가 다반사이다. 그래서 사용 요금은 시장의 규칙에 의해서가 아니라 규제자에 의해 많은 부수적인 방법을 통해 회수하고 있다. 본 논문에서는 모선 간 전력량을 고려한 전력망 사용요금 산정법을 제안하고자 한다. Equivalent Bilateral Exchange(EBE)와 Relative Electrical Path Width(REPW)를 각각 정의한 후 EBE와 REPW를 이용하여 전력 이동량을 계산하고 모선 간 전력 이동량을 바탕으로 DC 조류 계산을 이용하여 전력망 사용량을 할당하는 방법을 제안하였다. 제안된 방법을 검증하기 위해 2기 4모선을 테스트 시스템으로 선정해 기존의 방법과 비교를 해 보았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.430-432
• /
• 2007

This paper proposes the possibility of SonicID system which is the active RFID based on the ultrasonic spectrum instead of using radio frequency. For the feasibility study, various performance indexes are measured in terms of power consumption and signal path loss onto the frequencies of 40KHz, 433MHz, and 2.4GHz. In addition to the line of sight condition, realistic situations are considered for diverse deploying environments. The results of these analyses demonstrate that the SonicID holds the potential to meet the needs of future advanced RFID system in a scalable fashion.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.886-893
• /
• 2009

To develop glass panel vacuum lift system for the post process in module line of FPD(Flat panel display) such as LCD and PDP, new vacuum adsorption parts of this system are proposed. These parts are composed of variable geometry configurations utilizing ceramic porous medium for variable size of glass panels. In order to design this device, detail understanding of flow phenomena in the flow path of vacuum adsorption system is essential. Thus, CFD analysis and designs are performed for several configurations in terms of pressure drop and balancing force at the adsorption side. From the result, new configuration is recommended for optimum design and manufacturing purpose.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.22-26
• /
• 1999

In general, three are many degrees of freedom (DOF) in industrial robots. That can generate several special end-effector's positions and orientations. For that reason, industrial robots are used in a wide scope of industrial applications such as welding, spray painting, deburring, and so on. In this research, new method is presented which safely maintain the desired constant end-effector's orientation and minimize the numbers of segments in path. These algorithms may apply to welding, painting, and assembling. The simulation study of straight line and circular motions in arc-welding operations is carried out to show the sure proof of these algorithms.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1795-1800
• /
• 2000

One of the principal sources of vibration and noise in permanent magnetic machines is cogging torque, which is induced by interaction between the rotor poles and the stator teeth. For its analysis, using finite element analysis is very time consuming and the calculation of performance factors is extremely sensitive to the discretization. Especially, Maxwell stress tensor method is sensitive to the location of integral path. In this paper, a cogging permeance fuction is defined and replaced by the straight line. And it is assumed that the flux density acting on the stator's tooth side is the euqal to the flux density of the slot area. Using this definition and assumption, analytical calculation of cogging torque is presented and validated. And several reduction method is introduced.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.157-163
• /
• 2002

Using the CFD method, we investigated the combustion characteristics of grate-rotary kiln incinerator through the residence time, path line of flow and distributions of temperature and CO mass fraction according to the shape of mixing chamber and the existence and nonexistence of baffle at the exit of bypass duct. The results show that the now mixing and residence time could be variable according to the shape of mixing chamber and baffle, and we could know the temperature in the mixing chamber could increase too high if the combustion process on the grate retarded.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.19-25
• /
• 2002

Profile machining using cutter diameter compensation is widely used in die and mould manufacturing. Especially automotive die makers try to use 3D-profile machining for trimming or flange dies. But the technological requirements and implementation issues haven't been defined. In this paper we summarized the requirements and issues of 3D-profile machining. Approximation of input profiles into sequences of line and helical arc is the first major issue. The second major issue is removing cutter interference from the approximated curves holding z-values when the maximum cutter diameter is given. Keeping constant machining width, local machining, path linking problems and several detail technological requirements are also discussed.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.60-68
• /
• 2004

The purpose of this paper is to establish an effective inspection system by using OMM (On-Machine Measurement) system based PC-NC. This system can reduce manufacturing lead time because a workpiece is inspected at every machining process and the manufacturing system which includes inspection faculty is able to realize on-line process on CNC machining center. The proposed OMM system is composed of a few algorithms for determination of inspection parameters. It is accomplished by determining the number of measuring points, their location, measuring path using fuzzy logic, Hammersley's method, TSP (Traveling Salesperson Problem) algorithm. The inspection feature applied to this system is based on machining feature. This method is tested by simulation and experiment that are analyzed measuring data and geometry tolerance.

• 소음진동
• /
• 제2권2호
• /
• pp.107-116
• /
• 1992

An adaptive signal processing technique is implemented for the active noise cancellation of the plane acoustic wave propagating in a duct. To avoid the instability caused by the acoustic feedback from the control speaker to the detect microphone, an off-line modeling of the acoustic feedback plant is done using the FIR filter. Auxiliary path required for the filtered-x LMS algorithm is modeled as well. Before going into the experiments, a simulation is carried out under the same conditions with experiments. The simulation shows that the longer the length of the adaptive filter is, the better the results are achieved. Experiments have been carried out at lower audio frequency range (50 - 400Hz), and the results are in good agreements with those of simulation study. As a results of this adaptive noise control, around 50dB is reduced for a pure tone noise, and for a bandlimited noise with the bandwidth of 316Hz, a maximum of 30dB noise reduction is attained.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.485-490
• /
• 2004

Airborne laser mapping is the latest and fastest method for generating 3D data. By now, elevation data was mainly acquired using air photos. But this way takes long time from land control surveying to digital visualization. Airborne laser mapping does not need any ground control after system calibration. In this paper, power line and electric tower areas were measured. And using the 3D laser result and digital camera images, contour lines and mosaic images was generated and the accuracy was presented. Airborne laser mapping and digital camera have a full capacity to substitute existing methods for electric and landscape works.