• 한국콘텐츠학회논문지
• /
• 제6권4호
• /
• pp.46-54
• /
• 2006

다수 대의 표면실장기를 포함한 PCB조립라인의 생산성 향상을 위한 방법을 제시한다. PCB조립시간의 단축을 위하여 각 실장기 별로 부품공급 피더의 배치 및 실장순서가 최적화 되어야 하며, 표면실장기들의 라인 밸런스를 위하여 부품 할당이 최적화 되어야 한다. 전체의 최적화 문제를 정수계획문제로 수식화하며, 전향경로문제와 후향경로 문제로 분할하여 구성한다. 클러스터링 알고리즘과 branch-and-bound 알고리즘을 사용하여 전향경로문제의 해를 구하며, 할당 알고리즘과 연결 알고리즘을 사용하여 후향경로 문제의 해를 구한다. 시뮬레이션 결과를 통하여 제안된 방법의 성능을 평가한다.

• 한국컴퓨터정보학회논문지
• /
• 제19권5호
• /
• pp.89-98
• /
• 2014

본 논문은 NP-난제 문제로 알려진 단일모델 단방향 조립라인 균형문제에 대해 휴리스틱 알고리즘을 제안하였다. 조립라인 균형문제는 주로 메타휴리스틱 방법들을 적용하고 있는 추세이다. 제안된 알고리즘은 최종제품이 생산될 때까지 가장 많은 공정으로 조립되는 경로를 주경로로 설정하고, 주경로를 따라가면서 각 작업자에게 순환시간 조건을 만족하는 작업량을 배정하는 군집화 알고리즘을 제안하였다. 제안된 알고리즘은 최소의 작업자수를 결정하고, 순환시간도 단축시키는 결과를 얻었다. 9개의 다양한 실험 데이터에 제안된 주경로 군집화 휴리스틱 알고리즘을 적용한 결과 메타휴리스틱 방법들에 비해 보다 좋은 성능을 갖고 있음을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.31-34
• /
• 2000

In this paper, we design an optimal path for multiple mobile robots. For this purpose, we propose a new method of path planning for multiple mobile robots in dynamic environment. First, every mobile robot searches a global path using a distance transform algorithm. Then we put subgoals at crooked path points and optimize them. And finally to obtain an optimal on-line local path, ever)r mobile robot searches a new path with static and dynamic obstacle avoidance.

• 제어로봇시스템학회논문지
• /
• 제7권1호
• /
• pp.1187-1195
• /
• 2001

This paper presents a sweeping path planning algorithm for an autonomous smearing robot. An automatic planner generates a sweeping path pattern by proposed five basic procedures. This algorithm rocog-nizes obstacle on the architectural CAD draft and generates subgoals as tracking points which executes the area filling task based on heuristic approach. A sweeping path is planned by sequentially connecting the track-ing points in such a way that(1) the connected line segments should not be crossed, (2) the total tracking points should be as short as possible, and (3) the tracking line should not pass through the obstacle, Feasibility of the developed techniques has been demonstrated on a real architectural CAD draft.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1037-1040
• /
• 2002

In micro-stereolithography technology, fabrication conditions that include laser power, laser scan speed, laser scan pitch, and material property of photopolymer such as penetration depth and critical exposure are considered as major process variables. But the existing scan path generation methods based only on CAD model have not taken them into account, which has resulted in cross-section dimension of low accuracy. Thus, to enhance cross-section dimensional accuracy, the physical resin solidification n phenomena should be reflected in laser scan path generation and stage operating code. In this paper, multi-line experiments based on single line solidification model are performed. And the method for improving cross-section dimensional accuracy is presented, which is to apply the database based on experimental results to laser scan path generation.

• 한국정보통신학회논문지
• /
• 제6권5호
• /
• pp.667-675
• /
• 2002

본 논문에서는 신경망을 이용한 새로운 비선형 능동소음제어 시스템(ANC； active noise control system) 을 제안하였다. 제안한 시스템에서는 2개의 다층신경망을 사용하여 제어기와 2차 경로의 모델을 구성하였으며, 특히 기존의 비선형 ANC와는 달리 2차 경로의 모델링이 온라인으로 수행되기 때문에 2차경로가 시변 시스템인 경우에도 적용이 가능하다. 제안한 방범을 비선형 시변 시스템에 대해서 모의 실험한 결과 좋은 소음감소 효과를 보여주었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.882-885
• /
• 1987

The path of an industrial manipulator in a crowded workspace generally consists of 8 set of Cartesian straight line path connecting a set of two adjacent points. To achieve the Cartesian straight line path is, however, a nontrivial task and an alternative approach is to place enough intermediate points along a desired path and linearly interpolate between these points in the joint space. A method is developed that determines the subtravelling- and the transition-time such that the total travelling time for this path is minimized subject to the maximum joint velocities and accelerations constraint. The method is based on the application of nonlinear programming technique, i.e., FTM (Flexible Tolerance Method). These results are simulated on a digital computer using a six-joint revolute manipulator to show their applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2986-2988
• /
• 2005

To improve the reliability of power-line communication systems, the measurement and analysis has been proceeded in many power-line channel environments. In spite of the wired channel, power line channel has many multi-paths that are changing with load-variation, line-interconnection, impedance mismatching and so on. We accordingly need an analysis method based on the multi-path channel impulse response. Recently, a method to describe the homogeneous Power-line network has been published[1]. In this paper the modified method that can describe both the homogeneous and non -homogeneous power-line network has presented.

• 한국ITS학회 논문지
• /
• 제12권2호
• /
• pp.12-21
• /
• 2013

본 연구에서는 최단경로 탐색 소요시간을 줄이기 위한 목적으로 탐색영역을 축소하는 알고리즘을 개발하였다. 개발된 알고리즘은 출발노드와 목적노드를 최소의 노드 수로 연결하면서 직선거리의 합이 최소인 임시경로를 구축하고, 구축된 임시경로의 부하량 보다 적은 부하량의 경로를 연결할 가능성이 있는 노드들을 찾는 것이다. 하나의 노드에서 출발노드까지의 직선거리와 목적노드까지의 직선거리 합이 임시경로의 부하량을 최소 가로 부하량 원단위로 나눈 값보다 적을 경우, 그 노드는 임시경로 보다 더 적은 부하량을 가질 수 있는 경로를 구성할 가능성이 있는 노드가 된다. 이와 같은 노드들만을 탐색영역으로 하면 탐색영역이 축소됨에 따라 최단경로 탐색 소요시간을 줄일 수 있게 된다. 개발된 알고리즘은 큰 탐색영역에서 출발노드와 목적노드가 가까울 경우 더욱 효과적이다.