• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.76-76
• /
• 2011

Polymer-fullerene based bulk heterojunction (BHJ) solar cells can be fabricated in large area using low-cost roll-to-roll manufacturing methods. However, because of the low mobility of the BHJ materials, there is competition between the sweep-out of the photogenerated carriers by the built-in potential and recombination within the thin BHJ film [12-15]. Useful film thicknesses are limited by recombination. Thus, there is a need to increase the absorption by the BHJ film without increasing film thickness. Metal nanoparticles exhibit localized surface plasmon resonances (LSPR) which couple strongly to the incident light. In addition, relatively large metallic nanoparticles can reflect and scatter the light and thereby increase the optical path length within the BHJ film. Thus, the addition of metal nanoparticles into BHJ films offers the possibility of enhanced absorption and correspondingly enhanced photo-generation of mobile carriers. In this work, we have demonstrated several positive effects of shape controlled Au and Ag nanoparticles in organic P3HT/PC70BM, PCDTBT/PC70BM, Si-PCPDTBT/PC70BM BHJ-based PV devices. The use of an optimized concentration of Au and Ag nanomaterials in the BHJ film increases Jsc, FF, and the IPCE. These improvements result from a combination of enhanced light absorption caused by the light scattering of the nanomaterials in an active layer. Some of the metals induce the plasmon light concentration at specific wavelength. Moreover, improved charge transport results in low series resistance.

• 한국광학회지
• /
• 제17권3호
• /
• pp.240-247
• /
• 2006

본논문에서는 LCOS형 마이크로 디스플레이를 이용하여 60인치 이상의 대화면에서도 고해상도 및 슬림형이 가능한 프로젝션 TV용 광학계를 설계하였다. 조명광학계, 투사광학계, 색분리 합성계 그리고 마이크로 디스플레이 사이의 상호관계를 정량화하여 최적의 광학엔진을 구현하기 위한 초기데이터를 설정하고, 이로부터 최적화 과정을 통하여 각각의 광학계를 설계하였다. 고휘도를 구현하기 위한 3-panel 방식을 도입하고, 4개의 프리즘을 대칭적으로 배열하여 RGB의 광경로가 동일하도록 색분리 합성계를 구성하여 조명광학계를 컴팩트하게 설정하였다. 또한 투사광학계의 렌즈 군 사이에 거울을 삽입하여 접은 형태로 구성하여 고해상도 및 슬림형이 가능한 광학엔진을 설계하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.239.1-239.1
• /
• 2011

Dye sensitized solar cells (DSC) are promising devices for inexpensive, nontoxic, transparent, and large-scale solar energy conversion. Generally thick $TiO_2$ nanoporous films act as efficient photoanodes with their large surface area for absorbing light. However, electron transport through nanoparticle networks causes the slowdown and the loss of electron transport because of a number of interparticle boundaries inside the conduction path. We have studied DSCs with precisely dimension-controlled $TiO_2$ nanotubes array as photoanode. $TiO_2$ nanotubes array is prepared by template-directed fabrication method with atomic layer deposition. Well-ordered nanotubes array provides not only large surface area for light absorbing but also direct pathway for electrons with minimalized grain boundaries. Large enlongated anatase grains in the nanotubes could enhance the conductivity of electrons, but also suppress the recombination with holes through defect sites during diffusion into the electrode. To study the effect of grain boundaries, we fabricated two kinds of nanotubes which have different grain sizes by controlling deposition conditions. And we studied electron conduction through two kinds of nanotubes with different grain structures. The solar cell performance was studied as a function of thickness and grain structures. And overall solar-to-electric energy conversion efficiencies of up to 7% were obtained.

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.173-179
• /
• 2015

We report the facile synthesis of graphene-$CdLa_2S_4$ composite through a facile solvothermal method at low temperature. The as-prepared products were characterized by X-ray diffraction (XRD) and by Scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis and BET analysis, revealing the uniform covering of the graphene nanosheet with $CdLa_2S_4$ nanocrystals. The as-prepared samples show a higher efficiency for the photocatalytic degradation of typical MB dye compared with P25 and $CdLa_2S_4$ bulk nanoparticles. The enhancement of visible-light-responsive photocatalytic properties by decolorization of Rh.B dye may be attributed to the following causes. Firstly, graphene nanosheet is capable of accepting, transporting and storing electrons, and thus retarding or hindering the recombination of the electrons with the holes remaining on the excited $CdLa_2S_4$ nanoparticles. Secondly, graphene nanosheet can increase the adsorption of pollutants. The final cause is that their extended light absorption range. This work not only offers a simple way to synthesize graphene-based composites via a one-step process at low temperature but also a path to obtain efficient functional materials for environmental purification and other applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.96-99
• /
• 2005

As the demand of internet networks using backbone communication systems recently increased, the researches on the high-speed wideband optical communication systems are required. For high-speed optical communication systems, asymmetric sampled grating distributed feedback laser diodes (DFB-LDs) are developed and the reliability of DFB-LDs is examined. The reliability of DFB-LDs is performed by monitoring I-V and L-I characteristics and two degradation phenomena related to the electrical characteristics of LDs are observed during the life tests. The first degradation phenomenon by increasing the reverse current is considered as a formation of leakage current path enough to prevent lasing operation in lateral blocking layer near active region of lasers. The second degradation phenomenon by decreasing the forward current is considered as activation of non-radiative Auger recombination process by thermal energy and the second degradation phenomenon is recovered after the off-test period at room temperature Eventually, evaluating the reliability of DFB LDs can allow us to improved the manufacturability in high-volume manufacturing.

• 공업화학
• /
• 제22권2호
• /
• pp.190-195
• /
• 2011

다중층을 형성하여 광자를 가두는 효과와 산란층의 효과를 보고, $TiCl_4$ 처리를 통해 전극에서의 전자의 재결합이 줄어드는 정도와 그에 따른 효과를 알아보기 위하여 여러 가지 방법으로 $TiO_2$ 전극을 형성하고, 가장 최적의 전극 조건을 알아보았다. 각 전극의 특성을 알기 위해서 I-V 곡선, UV-VIS 분광기, EIS, IPCE를 측정하였다. 그 결과, I-V 곡선을 통해 한 층 보다는 다중층이 효율이 더 높은 것을 확인할 수 있었고, 기판 표면과 전극표면에 $TiCl_4$ 처리를 함으로써 EIS분석을 통해 반응저항이 감소하여 효율이 증가함을 확인할 수 있었다. 여러 전극 조건 중 산란층을 지닌 전극이 기본 한 층을 사용한 전극의 효율보다 약 19% 정도 높아짐을 확인하였다. 이러한 효율의 증가는 장파장을 투과하는 빛이 산란층을 통과할 때 전자 이동 경로가 길어지게 되어 단락전류의 값을 증가시키기 때문이다. 이에 따라, $J_{SC}$는 약 10% 정도 증가하였으며, IPCE는 최대 피크에서 약 12%가 향상되는 특성을 보였다.