• Composites Research
• /
• v.37 no.5
• /
• pp.422-426
• /
• 2024

Due to the rapid miniaturization and increased power density of electronic devices, a significant amount of heat is generated during operation. This has led to a surge in demand for thermal management materials, such as thermal interface materials (TIMs) with high thermal conductivity. Among the various types, paste-type TIMs, mixtures of liquid silicone polymers and thermal fillers, can effectively fill the rough surfaces between heat sources and heat sinks, thereby ensuring efficient heat dissipation. However, thermal pastes generally exhibit poor long-term stability due to issues like filler/resin phase separation under extreme conditions of repeated heating, cooling, and prolonged compression. Consequently, research on high-performance thermal pastes with excellent long-term stability is actively underway. This paper aims to introduce various strategies for producing silicone oil based thermal pastes that achieve both high thermal conductivity and superior long-term stability.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.21-28
• /
• 2017

The steel-plate concrete(SC) is used in a form of module assembly construction in the outer wall of nuclear-power plant and LNG containment. Since the steel-plate concrete modules are generally manufactured from the plant, the weight of SC has significantly effect on the total construction cost in the aspect of shipment. Therefore, the use of lightweight aggregates concrete(LWAC), which fill the inside of SC module can be a solution. However, the amount of used lightweight aggregates(LWA) is limited in the use of current concrete mixing process due to the concrete quality problems and it also determines the allowable minimum density of LWAC. In this research, the preplaced casting method is applied because of increasing the volume fraction of LWA significantly, which results from the producing process of pre-packing the LWA in the formwork and filling the interstitial voids between LWA using cement paste grout. The density and compressive strength of selected preplaced LWAC were $1,600kg/m^3$ and 30MPa and it was applied for the mock-up specimens of SC panel. It was used for the 3-point bending test for evaluating its structural performance. The results show that the preplaced LWAC can reduce the density of concrete with the adequate mechanical and structural performance.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.7
• /
• pp.35-46
• /
• 2009

Pressure grouting is a common technique in geotechnical engineering to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressure grouting has been applied to a soil-nailing system which is widely used to improve slope stability. The soil-nailing design has been empirically performed in most geotechnical applications because the interaction between pressurized grouting paste and the adjacent ground mass is complicated and difficult to analyze. The purpose of this study is to analyze the increase of pullout resistance induced by pressurized grouting with the aid of performing laboratory model tests and field tests. In this paper, two main causes of pullout resistance increases induced by pressurized grouting were verified: the increase of mean normal stress and the increase of coefficient of pullout friction. From laboratory tests, it was found that dilatancy angle could be estimated by modified cavity expansion theory using the measured wall displacements. The radial displacement increases with dilatancy angle decrease and the dilatancy angle increases with injection pressure increase. The measured pullout resistance obtained from field tests is in good agreement with the estimated one from the modified cavity expansion theory.

• Clinical and Experimental Pediatrics
• /
• v.52 no.10
• /
• pp.1090-1102
• /
• 2009

Purpose:To evaluate current feeding practices and maternal nutritional knowledge on complementary feeding. Methods:Mothers of babies aged 9-15 months who visited pediatric clinics of 14 general hospitals between September and December 2008 were asked to fill questionnaires. Data from 1,078 questionnaires were analyzed. Results:Complementary food was introduced at 4-7 months in 89% of babies. Home-made rice gruel was the first complementary food in 93% cases. Spoons were used for initial feeding in 97% cases. At 6-7 months, <50% of babies were fed meat (beef, 43%). Less than 12-month-old babies were fed salty foods such as salted laver (35%) or bean-paste soup (51%) and cow's milk (11%). The following were the maternal sources of information on complementary feeding: books/magazines (58%), friends (30%), internet web sites (29%), relatives (14%), and hospitals (4%). Compared to the 1993 survey, the incidence of complementary food introduction before 4 months (0.4% vs. 21%) and initial use of commercial food (7% vs. 39%) had decreased. Moreover, spoons were increasingly used for initial feeding (97% vs. 57%). The average maternal nutritional knowledge score was 7.5/10. Less percentage of mothers agreed with the following suggestions: bottle formula weaning before 15-18 months (68%), no commercial baby drinks as complementary food (67%), considering formula (or cow's milk) better than soy milk (65%), and feeding minced meat from 6-7 months (57%). Conclusion:Complementary feeding practices have considerably improved since the last decade. Pediatricians should advise timely introduction of appropriate complementary foods and monitor diverse information sources on complementary feeding.