• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1208-1218
• /
• 2019

The study is on the cosmetic solubilizing power of organic plant surfactants. The blended high purity polyglyceryl-10 oleate and polyglyceryl-10 stearate mixtures were synthesized using organically certified raw materials to develop surfactants having excellent solubilizing power. The mixture is called "Solubil ORG-1300". The appearance of this material is a pale yellowish paste, with a specific odor. The specific gravity was 1.12 and it was high purity that acid value was 0.072±0.1. The HLB value of this natural surfactant was averaged = 15.1 and calculated through the Griffin equation. Mechanically it is explained how organic surfactant are available with fragrance and oils. The solubilizing test was determined by eye evaluation method through the dissolving performance test for the two oils and measured the transmittance at 890 nm using a UV spectrophotometer to measure the transparency. The results showed that the concentration of surfactant needed to make Bergamot oil available requires approximately more 2 times. It was also found that the concentration of surfactant needed to make the tocoperyl acetate available was about 8 times higher. Experiments on the solubility resulting from pH changes showed stabilized usable solubilizing power even in acidic areas of pH=3.5, neutral areas of pH=7.2, and alkaline areas of pH=1.5. Experiments on the solubility according to pH variation showed good solubility stabilized in acidic areas of pH=3.5, neutral areas of pH=7.2, and alkaline areas of pH=11.5. As an application of cosmetics, the company successfully developed a prescription for moisturizing activity based on these results, it is expected that a wide range of applications will be available for skin care, baby lotion, sensitivity or atopic skin cosmetics.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.238-245
• /
• 2009

The antioxidant effects of chungkukjang, a popular fermented soybean paste in Korea, prepared with solar salt were investigated in vitro. DJI chungkukjang(DJIC) was prepared using 3%(w/w) solar salt or 3%(w/w) refined salt, and fermented by Bacillus subtilis DJI. All of DJIC with no salt, DJIC with 3%(w/w) solar salt, DJIC containing 3%(w/w) refined salt, and commercial chungkukjang were extracted with ethanol, hexane, and water. Antioxidative activities were measured by 1,1-diphenyl-2-picryl hydrazyl(DPPH) free-radical generation, nitrite scavenging activity, peroxide value in the presence of linoleic acid, and the Rancimat test, in comparison with the commercial antioxidant butylated hydroxytoluene(BHT). Ethanol chungkukjang extracts showed the highest antioxdative capacities, whereas DPPH free-radical generation and scavenging activities, and linoleic acid peroxide values of DJIC extracts prepared using solar salt, and salt-free DJIC, showed the greatest values. In addition, extracts of DJIC prepared using solar salt had the highest antioxidant indices. Antioxidative activities were higher in DJIC extracts than in those of commercial chungkukjang. However, the antioxidative capacities of DJIC prepared using solar salt and DJIC with no added salt were less than those of BHT. In conclusion, these results suggest that extracts of chungkukjang prepared using solar salt are useful nutritional antioxidants and that dietary supplementation with such materials would decrease oxidative stress.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.70-78
• /
• 2004

Although set accelerating agents are used generally in New Austrian Tunneling Method, the standards for test methods and quality of set accelerating agents are not prescribed domestically. In this study, the proprieties of the various standards and the characteristics of set accelerating agents for shotcrete were evaluated. The alkali contents of set accelerating agents based on silicate, aluminate and cement were higher than those of alkali-free ones. From the result, it is thought that the quality control of aggregate should be enhanced and that the number of test cycle of alkali-aggregate reaction should be increased. The setting times of cement paste with set accelerating agents based on silicate and alkali-free ones were different largely with mixing methods. Compressive strength of mortar with set accelerating agents based on silicate, aluminate and cement at one day satisfied the specifications of Korea Concrete Institute. However, the strength ratio compared to control mix at 28 days showed as $50{\~}65\%$ except for the alkali-free set accelerating agents. As a results of setting time and strength test, the establishment of domestic standards that can reflect the characteristics of materials and construction methods of tunnels and that can increase quality of set accelerating agents is required immediately.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.88-94
• /
• 2013

The hexavalent chromium (Cr(VI)) is well known as a hazardous ion, presumably inducing dermatic diseases and if serious cancer. The present study concerns the binding capacity of Cr(VI) ions in the cement powder and matrix for a quantitative technique of Cr(VI) ions in cement to influence human health. Both the water-soluble and acid-soluble Cr(VI) ions present in 3 types of ordinary Portland cement (OPC), pulverised fuel ash (PFA), ground granulated blast furnace slag (GGBS), and silica fume (SF) were measured using the spectrophotometer. As a result, it was found that the concentration of water-soluble Cr(VI) ion in cement ranged from 10.5 to 18.9mg/kg-cement, and in the additional materials a very low value of Cr(VI) ion was measured. Acid-soluble Cr(VI) ion was even higher than water-soluble Cr(VI) ion, ranging from 172.4 to 318.2mg/kg-cement. Nevertheless, the concentration of acid-soluble Cr(VI) ion is not proportional to addition of acid. It depends rather the variable pH of solvent involving cement paste. As enough cement hydration occurs, the binding capacity of Cr(VI) ion increases, inhibiting this ions from leaching out in the presence of hydration products such as ettringite or tri-calcium aluminate which bind Cr(VI) ion by ion-exchange.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.193-200
• /
• 1995

It has been well known that the alkali-aggregate reaction between the aggregates and cement paste is one of the reasons of a concrete siructre expansion. Because of a serious demage on the concrete stnicture from the expansion, in many countries, the safety of the materials is checked in laboratory by mortar-bar test and the upper limit of expansion in length is 0.1%. The prescriptions are presented in the ASTM C227 and 490 of U.S. which has been international currency and in the KS Handbook F2503, F2546 and L5107 of Korea published by Korean Standards Association. Both of the prescriptions are almost same in their contents. Actually, in the process of preparing and measuring the mortar-bar according to the prescription mentioned above, it seems that there are no problems for its own purpose but a few points are found to be improved upon the methods to increase the accuracy for laboratory work as follows. 1. The prescription of blending ratio(aggregate, cement and water) should be noted by volume not by weight. 2. It is unreasonable to measure the initial length of mortar bars after 24$\pm$2 hours at once regardless the kind of aggregates. 3. It may bring about errors in calculating the expansion ratio under the condition of the denominator value fixed as 254mm. 4. The measuring methods of specific gravity are selected according to the purposes but the pure specific gravity displays the highest accuracy among them.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.13-22
• /
• 2006

The geotextile have been used in filtration and drainage for over 30 years in many applications of civil and environmental projects. Geotextile tube is compound technology of filtration and drainage property of geotextile. Geotextile have been used for various types of containers, such as small hand-filled sandbags, 3-dimensional fabric forms for concrete paste, large soil and aggregate filled geotextile gabion, prefabricated hydraulically filled containers, and other innovative systems involving containment of soils using geotextile. They are hydraulically filled with dredged materials. It have been applied in coastal protection and scour protection, dewatering method of slurry, and isolation of contaminated material. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. This paper presents the behavior of geotextile tube composite structure by 2-D limit equilibrium and plane strain analysis. 2-D limit equilibrium analysis was performed to evaluate the stability of geotextile tube composite structure for the lateral load and also the plane strain analysis was conducted to determine the design and construction factors. Based on the results of this paper, the three types of geotextile tube composite structure is stable. And the optimum tensile strength of geotextile is 151kN/m and maximum pumping pressure is 22.7kN/m.

• The Journal of Korean Medical History
• /
• v.19 no.1
• /
• pp.111-133
• /
• 2006

This study was examined to reveal the medical Science of Balhae which was not well displayed until now. For this, the category of the medical science of Balhae(渤海) was decided in diachronic and synchronic perspective and the concrete contents of the medical science of Balhae(渤海) was presumed. Balhae(渤海) succeeded to the medical science of Koguryo(高句麗) and its orthodoxy. Through the interchange between Balhae(渤海) and the country as Dang(唐) and Shilla(新羅), Balhae(渤海) accepted new medical knowledge. Balhae(渤海) had a customs to eat a cake made of rice flour and artemisia paste on the Tano Festival(端午) to overcome its constitutional character. And medicines as Gon-po(昆布), Doo-shi were treated valuable. and they used Ondol(溫突). Balhae(渤海) advanced suigeneris abscess medicine(治腫醫學), and they valued much of Hyangyak(鄕藥). And they took the serious view on the scripture in the education and on the simplic in the clinic. It shows Balhae(渤海) had the unique medical tradition of our nation. The medical institution and medical educational system of Balhae(渤海) was fundamental to that of Koguryo(高句麗), and it was established in the reference of the system of Dang(唐) and Shilla(新羅). It influenced the establishment of medical system and medical education of Corea(高麗) later on. And the medical doctor of the Balhae(渤海) who was dispatched to Japan imparted the advanced medicine of Balhae(渤海) and it was fundamental to the Japanese medical development. Balhae(渤海) produced superior acupuncture on the basis of superior materials which are represented as metalwork technology and Corea-copper(高麗銅) which are handed down from the Old-Chosun(古朝鮮) and Koguryo(高句麗). And we can suppose the level of Balhae(渤海) through the fact that the acupunctual technique of Koguryo(高句麗) was spread out to the nearby country. By the tradition of acupuncture and moxibustion, the theory of Bi-bo(裨補) that cure a disease on the theory of acupuncture and moxibustion appeared in the north and south branch period(南北國時代). And we can prusure the level of acupuncture of Balhae(渤海) through this fact. Balhae(渤海) educated herbal medicine with priority given to Shin-nong-bon-cho-kyong(神農本草經) stand on the serious view on the scripture. They produced a various herbs on the basis of broad territory and suigeneris herbal medicine. It is famous herb of Balhae(渤海), that To-sa-ja, Gon-po(昆布), Doo-shi, Ginseng(人蔘), Woo-hwang(牛黃), Song-ja(松子), Hwang-myung-kyo (黃明膠), Baek-bu-ja(白附子), Sa-hyang(麝香), Honey(蜜).

• Composites Research
• /
• v.28 no.4
• /
• pp.155-161
• /
• 2015

A composite structure was fabricated with embedded impact detection capabilities for applications in Structural Health Monitoring (SHM). By embedding sensor functionality in the composite, the structure can successfully perform impact localization in real time. Smart resin, composed of $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr,\;Ti)O_2$ (PNN-PZT) powder and epoxy resin with 1:30 wt%, was used instead of conventional epoxy resin in order to activate the sensor function in the composite structure. The embedded impact sensor in the composite was fabricated using Hand Lay-up and Vacuum Assisted Resin Transfer Molding(VARTM) methods to inject the smart resin into the glass-fiber fabric. The electrodes were fabricated using silver paste on both the upper and bottom sides of the specimen, then poling treatment was conducted to activate the sensor function using a high voltage amplifier at 4 kV/mm for 30 min at room temperature. The composite's piezoelectric sensitivity was measured to be 35.13 mV/N by comparing the impact force signals from an impact hammer with the corresponding output voltage from the sensor. Because impact sensor functionality was successfully embedded in the composite structure, various applications of this technique in the SHM industry are anticipated. In particular, impact localization on large-scale composite structures with complex geometries is feasible using this composite embedded impact sensor.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.413-416
• /
• 2008

The concrete used most in construction materials. There is an overcrowded iron dimensions use of the concrete at time of the other concrete theory on the reinforcing rod back which did congestion and compares it with this, and there are more few dimensions of the aggregate than concrete, and quantity of aggregate passage is superior in mortar than concrete. If a volume rate of the aggregate writes mortar than concrete against this, therefore, unit amount increases, and quantity of paste increases and quantity of dry shrinkage than increase concrete. However, I let I regulate lay priest distribution of the aggregate, and the results rates increase and reduce unit amount and decrease quantity of dry shrinkage, and separation resistance and the gap passage characteristics are judged because it can be it in a substitute document of very superior concrete. I came to carry out the study that I watched to let I was useful a little more and do the improvement repair of a become building wall body, a basement pillar and repair reinforcement of the assistant in the reinforcing rod back, the old age when I made congestion here. I regulated lay priest distribution of the aggregate in the study and regulated substitution rate of the aggregate (40%, 50%, 60%) and divided W/C 30%, 40% standards and produced mortar and I compared quantity of air by this, slump, compression robbery and showed it this time.