• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.489-490
• /
• 2010

A novel soft-switching two-switch flyback converter is proposed in this paper. This converter is composed of two active power switches, a flyback transformer, and two passive regenerative clamping circuits.The proposed converter has the advantages of a low cost circuit configuration, a simple control scheme, a high efficiency, and a wide operating range. The circuit topology and experimental results of the new flyback converter are presented.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.159-160
• /
• 2015

Recently, it is increased to use the portable device with small size. It is also increasing for demand of a small size adapter. To reduce the size of components, switching frequency has to be increased. But it causes higher switching loss and temperature of components. Especially, the temperature of adapter must be limited because adapter can be easily touched when portable device is being charged. To reduce temperature of adapter, high efficiency is essential. To solve this problem, this paper proposes design of resonance frequency optimization for LLC converter with high efficiency and low temperature of passive components.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.5
• /
• pp.417-422
• /
• 2008

In this paper, a novel DC/DC low-voltage high-current converter circuit is proposed to improve the efficiency of power converter used in the grid-connected fuel-cell generator system. We proposed a novel high efficiency grid-connected power conditioning system for RPG fuel cell. On the result of that, the loss of system was decreased rapidly by driving stack within the condition of maximum efficiency. The peak currents of the current-type inductor and the transformer's coil are reduced by synchronizing switching frequency of Buck-type converter is increased twice as the Push-Pull converter's switching frequency. The novel structure of DC/DC converter is able to realize ZVS-ZCS in fuel-cell system is proposed. The proposed switching component of Push-Pull converter has the ZVS and ZCS function by using the circuit of new passive clamp.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.208-223
• /
• 1994

The purpose of this study was to evaluate the efficiency of diffusive(or passive) sampler in measuring airbone organic solvents. Diffusive samplers are generally simple in construction and do not require power for operation. The efficiency of the diffusive samplers has not sufficiently been investigated in Korea. Three types of samplers were studied in this study. The sampling and analytical results by passive samplers were compared with results by charcoal tube method recommended by NIOSH(National Institute for Occupational Safty and Health). The following characteristics are identified and studied as critical to the performance passive monitors; recovery, reverse diffusion, storage stability, accuracy and precision, face velocity and humidity, n-Hexane, TCE(trichloroethylene) and toluene were used as test vapors. A dynamic vapor exposure system consisting of organic vapor generator and sampling chamber for evaluating diffusive samplers are made. The results of the study are summarized as follows. 1. NIOSH recommands that the overall accuracy of a sampling method in the range of 0.5 to 2.0 times the occupational health standard should be ${\pm}25$ percent for 95 percent confidence level. Among three types of diffusive samplers, sampler A has permeation membrane and samplers Band C have diffusive areas, samplers A and B met the criterion that overall accuracy for 95% confidence level of the samplers were within ${\pm}25$ percent of the reference value. Sampler C had overall accuracy ${\pm}9.6%$ and ${\pm}11.8%$ in hexane and TCE, respectively. The concentration of toluene was overestimated in sampler C with overall accuracy of ${\pm}43.9%$. 2. The desorption efficiencies of diffusive samplers were 96-107%. 3. There was no significant sampe loss during four weeks of storage both with and without refrigeration. 4. There was no significant reverse diffusion, when the samplers were exposure to clean air for 2 hours after sampling for 2 hours at the level of 2 TLY. 5. In case of 8 hours sampling, relative differences(RD) of concentrations between charcoal tube method and diffusive method were 15-39%, 13-46%, and 4-35% for sampler A, B and C, respectively. The performance was poor in 8 hours sampling for multiple substance monitors. 6. At high velocity(100 cm/sec), samplers B and C overestimated the concentrations of organic vapors, and sampler A with permeation membrance gave better results. 7. At 80% relative humidity, samplers showed no siginificant effect. Low humidity also did not affect the diffusive samplers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.121-131
• /
• 2015

Passive emitter localization is preferred to use a small number of receivers as possible for the efficiency of strategic management in the field of modern electronic warfare support. Accurate emitter localization can be expected when utilizing continuous measurable parameters and a appropriate combination of theirs. For this reason, we compare CRLB (Cramer-Rao lower bound) of two moving platform with various measurable parameters to choose a appropriate combination of parameters for a better localization performance. And we propose the passive emitter localization method based on Levenberg-Marquardt algorithm with combined TDOA/FDOA and DOA to achieve better accuracy of emitter localization which is located on the ground and stationary. In addition, we present a method for determining the initial emitter position for LM algorithm's input to avoid the divergence of estimation and local minimum.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.9
• /
• pp.2944-2952
• /
• 1996

In this paper the CSCM type upwind flux difference splitting Navier-Stokes method has been applied to study the ARL-SL19 transoni $c^ersonic compressor cascade flow. First, the general characteristics of baseline cascade flow were analyzed. At freestream Mach n.1.612 and exit/inlet pressure ratio 2.15, the results from current laminar flow were compared well in suction surface with the experiment; however, not well in pressure surface. Second, numerical study of the transoni $c^ersonic compressor cascade flow demonstrated the effectiveness of a passive control by the various size cavities. A cavity under the shock foot point at the suction surface of the blades was used as a passive control. The passive control of shock-boundary layer interaction by a cavity reduced total pressure losses. The effect of cavity length and depth was studied. The total pressure loss was reduced by about 10% and the isentropic efficiency was improved slightly. The effect of cavity depth in current study(d/l = 0.05, 0.02) was not found strong. Further adequate turbulence modeling and TVD schemes would help to capture the shock more accurately and increase the effectiveness of the current shock-boundary layer interaction study using upwind flux difference splitting computational methods.thods.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.1
• /
• pp.10-15
• /
• 2021

Objective: Limited ankle dorsiflexion is related to ankle injuries. There are various exercises to increase the flexibility of the gastrocnemius for improving the passive range of motion in ankle dorsiflexion. However, to performances in daily activities and athletic sports and higher efficiency of walking and running, both ankle dorsiflexion passive and active range of motion are needed. To investigate the effects of combined gastrocnemius stretching and tibialis anterior resistance exercise on ankle kinematics (passive and active range of motion of ankle dorsiflexion) and tibialis anterior muscle activity in subjects with limited ankle dorsiflexion. Design: Cross-sectional single-group repeated measures design. Methods: Fourteen subjects with limited ankle dorsiflexion were recruited (in the right ankle in 7 and the left ankle in 7). All subjects performed gastrocnemius stretching alone and tibialis anterior resistance exercise after gastrocnemius stretching. The passive and active range of motion of ankle dorsiflexion were measured after interventions immediately. The tibialis anterior activity was measured during active range of motion of ankle dorsiflexion measurement. Results: There was no significant difference of ankle dorsiflexion passive range of motion between gastrocnemius stretching alone and the tibialis anterior resistance exercise after gastrocnemius stretching. The tibialis anterior resistance exercise after gastrocnemius stretching significantly increased active range of motion of ankle dorsiflexion compared to gastrocnemius stretching alone (p<0.05). The tibialis anterior resistance exercise after gastrocnemius stretching significantly increased tibialis anterior activity better than did gastrocnemius stretching alone. Conclusions: Thus, subjects with limited ankle dorsiflexion should be encouraged to perform tibialis anterior resistance exercises.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.47-53
• /
• 2012

Recently, by the increasing of data transmission rates, PCB is required high-speed data transmission rates and thin packaging. So optical PCB which is the combination of electrical layer and optical layer can be one of the solution to overcome the limitations of conventional electrical PCB. The most important factor in the implementation of optical PCB is optical interconnection. So the research on high-efficiency and passive alignment has been active. In this paper, we suggest built-in lens pluggable waveguide and we simulate its coupling efficiency and structural stability. Optical simulation results show that the proposed structure has higher efficiency than no lens structure about 1.86 times in transmitter and about 1.42 times in receiver. In structure simulation, inner lens has no damage in desorption process. Therefore, we shown that the proposed structure has a high coupling efficiency and structural stability.

• The KIPS Transactions:PartC
• /
• v.19C no.1
• /
• pp.9-18
• /
• 2012

In 2010, Pedro et al. proposed RFID distance bounding protocol based on WSBC cryptographic puzzle. This paper points out that Pedro et al.'s protocol not only is vulnerable to tag privacy invasion attack and location tracking attack because an attacker can easily obtain the secret key(ID) of a legal tag from the intercepted messages between the reader and the tag, but also requires heavy computation by performing symmetric key operations of the resource limited passive tag and many communication rounds between the reader and the tag. Moreover, to resolve the security weakness and the computation/communication efficiency problems, this paper also present a new RFID distance bounding protocol based on WSBC cryptographic puzzle that can provide strong security and high efficiency. As a result, the proposed protocol not only provides computational and communicational efficiency because it requires secure one-way hash function for the passive tag and it reduces communication rounds, but also provides strong security because both tag and reader use secure one-way hash function to protect their exchanging messages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.1028-1037
• /
• 2011

Recently, Selim et al proposed public key cryptography based privacy preserving multi-context RFID authentication protocol. However Selim et al's proposed protocol not only doesn't fit into passive tag based RFID system because it uses public key based encryption algorithm to perform authentication between reader and tag, but also is insecure to an impersonation attack because it doesn't provide mutual authentication. In order to eliminate the above described efficiency problem and security vulnerabilities, this paper proposes a new multi-context RFID mutual authentication protocol that can prevent privacy invasion and tag impersonation attack through providing mutual authentication between single passive tag which is located different application space and readers which provide multi-context purposes and can secure against relay attack and denial-of-service attack. As a result, the proposed protocol performs secure mutual authentication based on the collected space and time information from the RFID reader and provides strong security and high computation efficiency because if performs secure one-way hash function and symmetric encryption operations suitable to the environments of passive RFID tags.