• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.1
• /
• pp.64-75
• /
• 2003

Medical image segmentation is the process by which an original image is partitioned into some homogeneous regions like bones, soft tissues, etc. This study demonstrates an automatic medical image segmentation technique based on independent component analysis. Independent component analysis is a generalization of principal component analysis which encodes the higher-order dependencies in the input in addition to the correlations. It extracts statistically independent components from input data. Use of automatic medical image segmentation technique using independent component analysis under the assumption that medical image consists of some statistically independent parts leads to a method that allows for more accurate segmentation of bones from CT data. The result of automatic segmentation using independent component analysis with square test data was evaluated using probability of error(PE) and ultimate measurement accuracy(UMA) value. It was also compared to a general segmentation method using threshold based on sensitivity(True Positive Rate), specificity(False Positive Rate) and mislabelling rate. The evaluation result was done statistical Paired-t test. Most of the results show that the automatic segmentation using independent component analysis has better result than general segmentation using threshold.

• Journal of Korean Medicine for Obesity Research
• /
• v.23 no.2
• /
• pp.69-77
• /
• 2023

Objectives: Atriplex gmelinii C. A. Meyer is a halophyte belonging to the Chenopodiaceae family, and its young leaves and stems are used as fodder for livestock. The aim of the present study was to investigate the effects of A. gmelinii extract and its solvent fractions on lipid accumulation during adipogenesis of 3T3-L1 preadipocytes. Methods: The samples of A. gmelinii were separately extracted using methylene chloride and methanol. Subsequently, they were combined to formulate the initial extract, which was then partitioned based on polarity to prepare solvent fractions. Oil Red O staining was employed to measure lipid accumulation during the differentiation of 3T3-L1 preadipocytes. To verify cytotoxicity in 3T3-L1 cells, MTT assays were conducted. The expression levels of transcription factors in 3T3-L1 preadipocytes were measured through Western blotting analysis. Results: At 50 ㎍/mL, treatment of A. gmelinii extract and its solvent fractions during the differentiation of 3T3-L1 preadipocytes significantly diminished lipid accumulation with no noteworthy cytotoxicity on cell viability. Additionally, when investigating the biochemical pathways that underlie the prevention of lipid accumulation using solvent fractions, it was found that the n-BuOH and n-hexane fractions significantly decreased the expression of key transcription factors involved in the generation of fat, such as peroxisome proliferator-activated receptor γ (PPARγ), CCAAT/enhancer binding protein α (C/EBPα), and sterol regulatory element-binding protein-1c (SREBP1c). Conclusions: These findings indicate that A. gmelinii can effectively reduce the accumulation of fat in 3T3-L1 adipocytes, making it a potentially valuable material for mitigating and preventing obesity.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.637-644
• /
• 1997

In this paper, a method of finite element analysis is presented for efficient calculation of vibration characteristics of not only simply interconnected structure with cyclic symmetry but also multiply interconnected structure with cyclic symmetry by using discrete Fourier trandform by means of a computer with small memory in a short time. Simply interconnected structure means it is composed of substructures which are adjacent themselves in circumferential direction. First, a mathematical model of multiply interconnected structure with cyclic symmetry is defined. The multiply interconnected structure is partitioned into substructures with the same goemetric configuration and constraint eqauations to be satisfied on connecting boundaries are defined. Nodal displacements and forces are transformed into complex forms through discrete Fourier transform and then finite element analysis is performed for just only a representative substructure. In free vibration analysis, natural frequencies of a whole structure can be obtained through a series of calculation for a substructure along the number of nodal diameter. And in forced vibration analysis, forced response of whole structure can be achieved by using inverse discrete Fourier transform of results which come from analysis for a substructure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.401-410
• /
• 2008

The natural frequency of a beam plays an important role in not only vibration analysis but also understanding its dynamic characteristics. It is complicated to analyse the natural frequency of a stepped beam with discontinuously varying section. Approximate analysis methods such as Rayleigh-Ritz method, FEM, etc. are frequently used for the vibration analysis of stepped beams. In such a case, accuracy of these methods depends upon the number of partitioned elements, the number of the iterations in calculation and the assumed mode shape. This study presents an approximate analysis method for the fundamental natural frequency analysis of stepped cantilever beam, using equivalent beam transformation technique. Validity and usefulness are verified by comparing the proposed method with FEM for several example problems.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.560-568
• /
• 1991

The simultaneous determination method which simply determined regulated pesticides was investigated. Sample was extracted with acetone-methanol and partitioned with methylene chloride after addition of saturated NaCl solution. Entract was purified by Bio-Beads S-X3 column using cyclohexane-methylene chloride (1 : 1) as eluate. The determination of pesticides was performed by BP-1 capillary column gas chromatography using ECD and NPD. The average recoveries of pesticides in rice and soy fbean were over 83% and 81%, respectively. It was possible to detect pesticides in rice up to 0.002 ppm by $\alpha-BHC$ and up to 0.05 ppm by carbaryl and in soy bean up to 0.01 ppm by ${\alpha}$-BHC and up to 0.3 ppm by carbaryl.

• YAKHAK HOEJI
• /
• v.46 no.2
• /
• pp.93-97
• /
• 2002

Methidathion is one of the organophosphorus pesticides commonly used for stamping out harmful pests in farming areas. This paper presents a fatality due to methidathion intoxication and describes the distribution of methidathion in postmortem blood and tissues obtained at autopsy. Qualitative identification of methidathion was achieved by TLC, GC and GC/MS, and quantitative analysis was performed by GC with thermionic specific detector (TSD). The analytes in postmortem specimens were extracted by liquid-liquid extraction (LLE) with ethylether. After the ethylether layer was evaporated, the residue was partitioned into hexane and acetonitrile, and the acetonitrile layer was used for analysis. Tissue specimens were homogenized with 4% perchloric acid and applied for LLE. After extraction, the extracts were reconstituted 100 $\mu\textrm{g}$ pyraclofos (IS, 100 $\mu\textrm{g}$/ml in methanol) for GC and GC/MS analysis. On analysis of postmortem specimens, methidathion was identified and quantitated. The methidathion concentrations were 2.0 $\mu$l/ml in blood, 24.4 $\mu\textrm{g}$/g in liver, 13.9 $\mu\textrm{g}$/g in lung, 21.8 $\mu\textrm{g}$/g in kidney, respectively.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.3
• /
• pp.182-197
• /
• 2016

One of the distinctive characteristics of industrial engineering (IE) is its multidisciplinarity. This paper explores the multidisciplinary nature of IE using journal citation network analysis. Using the relatedness indexes of IE journals obtained from journal citation report (JCR), we firstly construct the IE network only composed of 26 IE journals. The resulting IE network is partitioned into three sub-networks: management engineering, manufacturing/quality, and ergonomics. We then propose the IE convergence network which includes 81 related journals in other disciplines as well as 26 IE journals. Scrutinizing the IE convergence network reveals that IE has a high degree of interactions with seven disciplines : Operations Research and Management Science, Statistics and Probability, Manufacturing Engineering, Computer Science, Engineering Design, Business Management, Human Factors and Ergonomics. We investigate the contributions of the related disciplines to IE as well as contributions of IE to the related disciplines. The role of IE journals in exchanging knowledge with related disciplines is also identified by brokerage analysis. It is shown that visualizing and analyzing the IE convergence network can provide an excellent overview of the multidisciplinary structure of IE, which can help IE researchers easily grasp the state-of-the art of IE research.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.141-146
• /
• 2012

The outer bark of Prunus sargentii was collected, air-dried and extracted with 70% aqueous acetone. Then it was successively partitioned with n-hexane, dichloromethane ($CH_2Cl_2$), ethyl acetate (EtOAc) and $H_2O$. From the EtOAc soluble fraction, four compounds were isolated by the repeated Sephadex LH-20 column chromatography. The isolated compounds were determined as (+)-catechin (1), (-)-epicatechin (2), taxifolin (3), and neosakuranin (4) by the spectroscopic analysis including $^1H$, $^{13}C$-NMR, and 2D-NMR spectrometers. The antioxidative activities on the isolated compounds and the separated fractions were evaluated by DPPH radical scavenging assay. The crude, EtOAc, and $H_2O$ soluble fractions indicated good antioxidative potential compared to the $CH_2Cl_2$ and n-hexane soluble fractions.

• Journal of Korean Academy of Nursing
• /
• v.21 no.2
• /
• pp.168-185
• /
• 1991

A written association test has been conducted to establish the concept, the meaning and the process of hope. The test consists of the major question : List of three words related to “hope”. The question was given to 55 nurses(rehabilitation /cancer /internal medicine care wards units) and 61 patients. A total of 289 words have been collected, and the collection was analyzed with categorization by the value or meaning of listed words. The analysis yields three major categories, namely, componants of hope, metaphores /symbols, and synonyms. The three major categories may be further partitioned into subcategories. The results are significant to define the nature of the hope and process of the hope. These understanding will facilitate the development of effective methods of nursing or chronic or cancer patients disabled.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.4
• /
• pp.337-344
• /
• 2000

The present study describes a one-dimensional modeling of encapsulated ice storage tanks. The thermal transmittance of capsules in this model uses the results from the Arnold's experimental $study^{(2-3)}$.In this model, ice storage tank is partitioned by several control volumes for the analysis, each having same number of capsules. The model is validated by the comparison of the measured data from an ice storage tank installed at a building with the capacity of 1200 ton-hrs and the simulated results with the same inlet brine temperature conditions into the tank.