• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2008

This paper presents the reflection and transmission measurements conducted at the 60GHz suitable to provide a high speed wide band service. Mean received power and standard deviation are calculated and used to compare the characteristics of radio wave propagation to the various obstacles between transmitting and receiving antennas at the frequency. The results show that the transmitted signal strength by the steel door and copper plate are about 40dB lower than in free space, those by the rubber plate, glass and styroform are about 3dB lower than in free space. Also, the re(looted signal strengths at the 60 degree grazing angle show that in case by the partition is about 23dB lower, by the surface of a wall is about 6dB lower than by the copper plate. The presented results can be used for the design of 60 GHz picocell communication network that the reflected and transmitted waves affect to the service area.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.4
• /
• pp.363-373
• /
• 2018

Evacuation facilities are installed so that people can evacuate high-rise apartment houses when it is impossible to escape fire through the front door. The households of apartment houses may escape the building in two ways, which will reduce loss of lives. This study examined the characteristics of two-way evacuation facilities, including a light-weight partition wall, shelter space at the balcony and horizontally-installed indoor emergency exit. Then, it proposed a horizontally-installed outdoor emergency exit that improved the problems of the examined facility types, and analyzed its economic-feasibility. When a horizontally-installed emergency exit instead of a traditional type to escape from fire is used, people may be more autonomous in deciding whether active evacuation is possible or not. Thus, the time required to evacuate the building with 4 different evacuation methods using the stairs and horizontally-installed emergency exit was simulated in consideration of the impact of evacuation methods that people choose on the time required for evacuation using pathfinder. Then, the simulation results were compared and analyzed. Any appropriate evacuation method to reduce the time required for evacuation was predicted, analyzed and decided. As a result of this study, it was analyzed that the high - rise apartment top - down type evacuation zone can shorten the total evacuation time compared to the staircase type.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.291-298
• /
• 2002

Recently, construction of reinforced concrete tall buildings is widely increased according to the improvement of material quality and design technology. Therefore, differential shortenings of columns due to elastic, creep, and shrinkage have been an important issue. But it has been neglected to predict the Inelastic behavior of RC structures even though those deformations make a serious problem on the partition wall, external cladding, duct, etc. In this paper, analysis system for prediction and compensation of the differential column shortenings considering time-dependent deformations and construction sequence is developed using the objected-oriented technique. Developed analysis system considers the construction sequence, especially time-dependent deformation in early days, and is composed of input module, database module, database store module, analysis module, and analysis result generation module. Graphic user interface(GUI) is supported for user's convenience. After performing the analysis, the output results like deflections and member forces according to the time can be observed in the generation module using the graphic diagram, table, and chart supported by the integrated environment.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.201-206
• /
• 2023

In order to improve the spatial resolution of the gamma camera, the size of the hole in the collimator must be reduced, so the sensitivity is reduced. In order to improve the sensitivity, the size of the hole must be increased, and thus the spatial resolution is reduced. In other words, spatial resolution and sensitivity show opposite characteristics. In this study, a gamma camera was designed to improve both spatial resolution and sensitivity. In order to obtain higher sensitivity in gamma cameras with the same spatial resolution, the structure of the scintillator was designed differently from the existing system. A scintillation pixel was used, and a partition wall was placed between the scintillation pixels to prevent incident gamma rays from being transmitted to other scintillation pixels to interact. Geant4 Application for Tomographic Emission (GATE) simulation was performed to evaluate the performance of the designed gamma camera. When the same sensitivity as the block-type scintillator was obtained, the spatial resolution increased by 16.5%, and when the same spatial resolution was obtained, the sensitivity increased by 61.5%. It is considered that the use of the gamma camera designed in this study can improve the sensitivity compared to the existing system while securing excellent spatial resolution.