• 제목/요약/키워드: particulate metal

검색결과 206건 처리시간 0.032초

매연포집필터 과열로 발생한 디젤승용차화재 원인의 분석 (Analysis of a Car Fire Case Caused by the Overheating of a Diesel Particulate Filter)

  • 이의평
    • 한국화재소방학회논문지
    • /
    • 제31권1호
    • /
    • pp.89-97
    • /
    • 2017
  • 본 연구에서는 서비스센터에서 정비를 받고 출고한 날로부터 5일 후 터널 주행 중에 발생한 디젤승용차 화재 사례를 조사분석하였다. 조사분석한 결과, 배기구 내부에 흰색 이물질이 다량 부착되어 있었고, 배기관의 중간에 설치된 diesel particulate filter (DPF) 위쪽의 차열재가 용융 및 소실되어 있었고, DPF 위쪽의 차실 내부 금속재 바닥이 천공되어 금속재 바닥 위에 놓인 고무매트가 연소된 케이스이었다. 그리고 DPF 앞쪽의 배기관에는 과열흔적이 없고 DPF부터 배기구까지의 배기관에 과열흔적이 있는 특이점이 있었다. 이러한 특이점들은 DPF가 과열되고 DPF에서 발화된 경우에만 나타나므로 이 승용차화재는 DPF 내부 과열에 의해 발생한 것으로 분석할 수 있었다. 그리고 이 승용차화재조사를 통해 디젤승용차 화재원인조사 과정에서 배기구 내부에서 흰색 이물질이 확인되는 경우에는 DPF를 분리하여 DPF 내부의 손상을 조사하여 화재원인을 판정하여야 함을 알 수 있었다.

초음파를 이용한 입자강화 금속복합재료의 계면특성에 관한 이론적 연구 (A Theoretical Study on Interface Characteristics of SiC Particulate Reinforced Metal Matrix Composite Using Ultrasonics)

  • 이준현
    • 비파괴검사학회지
    • /
    • 제13권4호
    • /
    • pp.9-17
    • /
    • 1994
  • 초음파법은 종래의 금속재료는 물론 최근의 금속 복합재료등과 같은 신소재의 재료특성을 비파괴적으로 평가할 수 있는 일반적인 방법이다. 그러나 이와같은 재료들의 비파괴 특성 평가를 위해 초음파법을 적용시킬 경우 무엇보다도 재료 내부를 전파하는 탄성파의 전파특성에 대한 물리적 현상에 대한 이해가 필수적이다. 본 연구에서는 금속 복합재료의 제조공정에서 일반적으로 많이 발생되는 기지재와 강화재 사이의 계면 문제 및 기지재에 분포하는 강화재의 체적함유율의 변화등에 의한 유효 평면파의 다중 산란 특성을 SiC 입자강화 6061 알루미늄 복합재료에 대해 Lax의 준 결정 근사(quasi-crystalline approximation) 이론 및 소감정리 (extinction theorem)를 기초로 하여 이론적으로 해석하였다. 그 결과 SiC 입자 강화재의 체적 함유율의 변화에 대한 유효 평면파의 위상속도 및 감쇠의 주파수 의존 특성과 금속복합재료에 있어서의 기지재와 강화재 사이의 계면층의 탄성특성에 대한 위상속도의 변화 특성이 명확하게 규명되었다.

  • PDF

SiC 입자강화 Al-Si 복합재료의 내마멸성에 미치는 Cu , Mg의 영향 (Effects of Cu and Mg on Wear Properties of SiC Particulate Reinforced Al-Si Metal Matrix Composites)

  • 심상한;정용근;박익민
    • 한국주조공학회지
    • /
    • 제10권1호
    • /
    • pp.43-49
    • /
    • 1990
  • The influences of Cu and Mg addition on wear properties of SiC particulate reinforced Al-Si metal(alloy) matrix composites were investigated. Metal matrix composites were prepared by combination of compocasting and hot pressing techniques. The main results obtained are as follows : 1) The composite with Mg addition exhibits letter wear resistance than that with Cu addition. It is considered that Mg addition improved wettability of matal matrix composite by the strong segregation to the SiC / Al matrix interface. 2) After homogenization treatment, it was found that the interfacial segregation of Mg was predominant, while that of Cu was not detected. 3) The SiC / Al-11Si eutectic composite exhibits better wear resistance than the SiC / Al-6Si hypoeutectic composite does. 4) It seems that the increase in the amount of Mg addition affects on the uniform dispersion of SiC particulates, on the refinement of microstructure and on age hardening and these effects cause wear resistance improvement of composites.

  • PDF

Trace Metals in Surface Seawaters and Mussels around the Dokdo, Korea

  • Kim, Kyung-Tae;Kim, Eun-Soo;Lee, Soo-Hyung;Cho, Sung-Rok
    • Ocean and Polar Research
    • /
    • 제24권4호
    • /
    • pp.399-406
    • /
    • 2002
  • Trace metals were investigated for the surface seawaters and mussels collected in adjacent sea to the Dokdo during 1999-2000. This study reports the temporal and spatial distributions of trace metals in seawaters and mussels of the Dokdo coastal areas. Clean technique for trace metal analyses was employed in all manipulations including the sampling and pretreatment procedures. The concentrations of dissolved Cu, Cd and Pb in the surface seawaters were similar to those of the previous data in the East Sea. Contents of particulate Al, Fe, Mn and Co were influenced by input of detrital materials from the Dokdo. The average EFs of particulate metals were to the order of Cd > Zn > Pb > Cu > Ni > Mn > Co > Fe, and the high values in Cd and Zn may be closely related to the preferential uptake of biogenic particles. With the exception of Cd, all metal contents in the mussels were in the same ranges with those from other world coastal areas. The Cd accumulation factor of mussel/seawater in this study was abnormally much higher than previous data from the Korean coasts.

Metal Effects of Urban Air Particulates on Cytokine Production and DNA Damage

  • Lee, Kwan-Hee;Hong, Yun-Chul
    • Toxicological Research
    • /
    • 제17권4호
    • /
    • pp.255-265
    • /
    • 2001
  • Epidemiologic studies have demonstrated an association between short-term exposure to particulate air pollutants and increased mortality. However the biological mechanism underlying these associations have not been fully established and also the chemical and physical characteristics of the pollutant particles are not well understood. The metal constituents of air pollutant particles and their bioavailability are considered to Play an important role as possible mediators of Particle-induced airway injury and inflammation. Sprague-Dawley rat alveolar macrophage cells (NR8383) were exposed to airborne and acid-leached particulate matter (PM). Titanium oxide and nickel subsulfide were used as negative and positive controls. Particle-induced reactive oxygen species formation in cells was detected using the fluorescent probe 2',7'-dichlorofluorescin diacetate. Expression of TNF-$\alpha$ and IL-6 were measured by enzyme-linked immunosorbent assay, and PM-induced DNA double-strand breaks were determined with $\lambda$DNA/Hind III marker. Metals associated with air pollutant particles mediated intracellular oxidant production in alveolar macrophages, and the cytotoxicity and proinflammatory cytokine production induced by PM were associated with oxidative stress. The oxidants produced by air pollutant particles also are likely to induce DNA double-strand breaks. Our findings in alveolar macrophage cells exposed to PM and acid-leached PM support the hypothesis that metal components in urban air pollutants and their bioavailabilities might play an Important role in the induction of the adverse health effects.

  • PDF

Thixoforming을 위한 금속복합재료의 재가열 공정 (Reheating Process of Metal Matrix Composite for Thixoforming)

  • 안성수;강충길;조형호
    • Composites Research
    • /
    • 제13권4호
    • /
    • pp.19-32
    • /
    • 2000
  • 본 논문은 강화입자가 균일하게 분산된 금속 복합재료의 제조와 반용융 성형을 위한 재가열에 관한 연구결과이다. 강화재 크기의 종류에 따른 금속복합재료를 제조하기 위하여 전자기식 교반과 기계식 교반을 동시에 이용한 복합 교반법을 사용하였다. 복합 교반법에 의하여 제조된 금속복합재료의 분산 상태를 조사하였다. 복합재료를 제조하기 위한 전자기식 교반법과 기계식 교반법을 겸용으로 한 공정이 소개되었다. 금속복합재료의 반용융성형을 위해서, 금속복합재료의 빌렛과 코일표면사이의 길이, 코일의 지름과 빌렛사이의 길이로 구성된 함수로 최적의 코일을 설계하여 빌렛을 재가열하였다. 복합재료의 반용융 성형시에 필요한 재가열 공정 인자인 가열시간과 온도변화의 관계를 조사하였다. 재가열중 강화재의 분산상태가 온도변화에 미치는 영향에 대하여 검토하였다.

  • PDF

Quantitative Analysis of SO2 and NO2 Adsorption and Desorption on Quartz Crystal Microbalance Coated with Cobalt Gallate Metal-Organic Framework

  • Junhyuck Ahn;Taewook Kim;Sunghwan Park;Young-Sei Lee;Changyong Yim
    • 센서학회지
    • /
    • 제32권3호
    • /
    • pp.147-153
    • /
    • 2023
  • Metal-organic frameworks (MOFs) of cobalt gallate were synthesized and deposited on gold electrodes using self-assembly monolayers (SAMs) and hydrothermal processing. These MOF films exhibit strong adsorption capabilities for gaseous particulates, and the use of SAMs allows the synthesis and deposition processes to be completed in a single step. When cobalt gallate is mixed with SAMs, a coordination bond is formed between the cobalt ion and the carboxylate or hydroxyl groups of the SAMs, particularly under hydrothermal conditions. Additionally, the quartz crystal microbalance (QCM) gas sensor accurately measures the number of particulates adsorbed on the MOF films in real-time. Thus, the QCM gas sensor is a valuable tool for quantitatively measuring gases, such as SO2, NO2, and CO2. Furthermore, the QCM MOF film gas sensor was more effective for gas adsorption than the MOF particles alone and allowed the accurate modeling of gas adsorption. Moreover, the QCM MOF films accurately detect the adsorption-desorption mechanisms of SO2 and NO2, which exist as gaseous particulate matter, at specific gas concentrations.

중등학교에서 사용 가능한 미세먼지 포집 장치 제작을 통한 대기 중 중금속 및 미생물 분석 (Analysis of Heavy Metal Element and Microorganism by Manufacture of Particulate Matter Sampler for Science Project of Secondary School)

  • 권우진;김영재;변정호
    • 한국지구과학회지
    • /
    • 제36권1호
    • /
    • pp.125-135
    • /
    • 2015
  • 이 연구에서는 중등학교에서 사용할 수 있는 미세먼지 포집 장치를 직접 설계 및 제작하고 이를 통해 미세먼지에 포함된 중금속 및 미생물을 분석하는 활동이 가능한지 여부를 탐색하고자 한다. 중등학교 현장의 과학 탐구활동을 위해 청주지역에서 미세먼지를 포집하는 방법과 그 속에 포함된 중금속 및 미생물을 분석하였다. 미세먼지의 포집장소는 청주지역 대학교의 4층 건물 옥상에서 포집하였다. 모터 펌프, 인넷, 지름 $1.0{\mu}m$ 테프론필터, 필터 홀더 등을 이용하여 포집장치를 제작하였다. 이 포집장치를 이용한 미세먼지 포집은 2013년 12월-2014년 6월까지 진행하였다. 포집한 미세먼지의 중금속 성분과 미생물 포함 여부를 분석하였다. 중국에서 날아온 미세먼지 속에는 Cu, Zn, Cd, Ni, Pb 등인위적인 오염물질로 판단되는 중금속 성분이 국내 기원 미세먼지 보다 많았다. 더 나아가, 미세먼지 속에는 중금속 뿐만 아니라, 곰팡이나 세균같은 미생물도 다량 포함하고 있었다. 이 연구는 미세먼지가 중금속 뿐만아니라 미생물도 포함하고 있으므로, 이에 대한 체계적인 연구와 모니터링이 필요함을 시사한다고 할 수 있다. 또한, 이 연구는 중등학교 과학실험의 사례로 제공될 수 있다.

Environment Parameters Affecting Heavy Metal Concentration in Sand Collected from Children Playground in Seoul Metropolitan Area

  • An, Hyunsun;Kim, Juhee;Hyun, Seunghun
    • 한국토양비료학회지
    • /
    • 제46권3호
    • /
    • pp.193-202
    • /
    • 2013
  • The concentrations of heavy metals such as cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), zinc (Zn), nickel (Ni), and arsenic (As) in sand samples collected from selected children's playground and their correlation with environmental parameters, such as concentration of particulate matter in the atmosphere ($PM_{10}$), apartment age (> 5 years), clay and organic matter contents in sand samples, were analyzed. The average heavy metal concentration in samples was 0.040 mg $kg^{-1}$ for Cd, 0.200 mg $kg^{-1}$ for Cr, 1.75 mg $kg^{-1}$ for Cu, 15.1 mg $kg^{-1}$ for Ni, 3.42 mg $kg^{-1}$ for Pb, 66.7 mg $kg^{-1}$ for Zn and 0.750 mg $kg^{-1}$ for As, all of which were below the environmental regulatory level established by Korea Ministry of Environment. However, in the consideration of direct and oral exposure by children to playground sand, the risk of the concentration range in the samples might be greatly enhanced. Heavy metal concentration in samples collected from high $PM_{10}$ (> $70{\mu}gm^{-3}$) area was slightly greater than in samples from low $PM_{10}$ (< $70{\mu}gm^{-3}$), indicating the contribution of particulate matter in air phase to heavy metal concentration in playground sand samples. The concentrations of both Cd and Pb were the highest in apartments older than 21 years (0.050 mg $kg^{-1}$ and 5.28 mg $kg^{-1}$ for Cd and Pb respectively) and showed positive correlation with apartment age (p<0.01 and p<0.001 for Cd and Pb, respectively). Clay content in playground sands ranged 3.8~11.2% and was positively correlated with heavy metal concentration. Organic matter content was negligible (mostly < 0.1%) and showed poor correlation with heavy metal concentration. In conclusion, concentration of heavy metals in playground sand was found to be predominantly influenced by the apartment age and clay content in sand samples and supplemented by dust deposition of particulate matter ($PM_{10}$) from atmosphere.