• Composites Research
• /
• 제23권1호
• /
• pp.17-22
• /
• 2010

자기화 분말 함유량과 분말의 배향, 그리고 자기력 세기를 함수로 한 자기유동 탄성체의 압축 및 동적특성에 대해 연구하였다. 시험편은 순수 실리콘과 분말이 불규칙 배향된 실리콘, 축 방향으로 배향된 실리콘 그리고 축 직각 방향으로 배향된 실리콘으로 구분하였다. 탄성체 내에 포함된 분말의 배향을 위해 복합 탄성체의 성형을 자기장 내에서 실시하였다. 압축 및 동적시험은 자기력이 없는 경우와 자기력의 크기를 다르게 제어하는 경우로 구분하여 수행되었다. 복합 탄성체의 탄성율 및 손실계수는 동일한 자기력 세기에서 분말 함유량의 증가에 따라 증가하였다. 축 방향으로 배향된 복합탄성체의 탄성율과 손실계수는 축 직각 방향 배향 혹은 불규칙 배향에 비해 높게 나타났다.

• 한국분말재료학회지
• /
• 제7권1호
• /
• pp.35-41
• /
• 2000

Al2O3$.$SiC particle was prepared was prepared by the self-propagting high temperature sYthesis(SHS) process from a mixture of SiO2, Al and C powders, The fabricated Al2O3$.$SiC particle was applied to 2024Al/(Al2O3$.$SiC)pcomposite as a reinforcement. Aluminum matix composites were fabricares by the powder extrusion method using the synthesized Al2O3$.$SiC particle and commercial 2024Al powder. Theoptimum preparation conditions for Al2O3$.$SiC partticle by SHS process were described. The influence of the Al2O3$.$SiC voiume fraction on the mechanical was composite was also discussed. Despite adiabatic temperature was about 2367K, SHs reaction was completed not by itself, but by using pre-heating. Mean particle size of final particle synthesized was 0.73 ${\mu}$m and most of the particle was smaller than 2${\mu}$m. Elastic modulus and tensile strength of the composite increased with increase the volume fraction of reinforcement but, tensile strength depreciated at 30 vol% of reinforcement.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1151-1162
• /
• 1999

The effects of radial heat and $H_2O$ diffusion on the evolution of silica particles in coflow diffusion flames have been studied experimentally. The evolution of silica aggregate particles in coflow diffusion flames has been measured experimentally using light scattering and thermophoretic sampling techniques. The measurements of scattering cross section from $90^{\circ}$ light scattering have been utilized to calculate the aggregate number density and volume fraction using with combination of measuring the particle size and morphology through the localized sampling and a TEM image analysis. Aggregate or particle number densities and volume fractions were calculated using Rayleigh-Debye-Gans and Mie theory for fractal aggregates and spherical particles, respectively. Flame temperatures and volumetric differential scattering cross sections have been measured for different flame conditions such as inert gas species, $H_2$ flow rates, and burner injection configurations to examine the relation between the formation of particles and radial $H_2O$ diffusion. The comparisons of oxidation and flame hydrolysis have also been made for various $H_2$ flow rates using $N_2$ or $O_2$ as a carrier gas. Results indicate that the role of oxidation becomes dominant as both carrier gas($O_2$) and $H_2$ flow rates increases since the radial heat diffusion precedes $H_2O$ diffusion in coflow flames used in this study. The effect of carrier gas flow rates on the evolution of silica particles have also been studied. When using $N_2$ as a carrier gas, the particle volume fraction has a maximum at a certain carrier gas flow rate and as the flow rate is further increased, the hydrolysis reaction Is delayed and the spherical particles finally evolves into fractal aggregates due to decreased flame temperature and residence time.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.740-744
• /
• 1995

For the fabrication of a multi-pole anisotropic Sr-ferrite magnet by powder injection molding, it is important to control effectively the alignment of magnetic powders during the injection molding process. The effect of the fluidity of powder/binder mixture on the powder alignment was studied with changing the particle sizes and the volume fraction of Sr-ferrite magnetic powders. The critical volume fraction of Sr-ferrite powders increases from 58 vol.% to 64 vol.% as the mean powder size increases from $0.8\;\mu\textrm{m}$ to $1.2\;\mu\textrm{m}$. A Sr-ferrite powder alignment greater than 80 % is achieved at the conditions of an apparent viscosity lower than 1000 poise at $1600\;sec^{-1}$ shear rate, an applied magnetic field higher than 4 kOe, and a powder volume fraction 8 vol.% lower than the critical fraction. The powder alignment obtained during the injection molding process is not much affected by the subsequent processes of debinding and sintering, showing the magnetic properties of 3.8 kG of remanent flux density and 3.37 kOe of intrinsic coercivity.

• 한국지반공학회논문집
• /
• 제24권8호
• /
• pp.125-135
• /
• 2008

모래 입자와 연약한 고무 입자로 이루어진 강-연성 혼합재의 응력-변형 및 전단파 특성을 평가하기 위해 고무와 모래의 부피비(sf)와 입자 크기비(sr)를 달리하는 시료를 조성하였다. 벤더 엘리먼트가 설치된 압밀셀을 이용하여 응력-변형시험 및 $K_o$ 상태에서의 미소변형 전단파 시험을 실시하였다. 일정한 입자 크기비를 가지는 강-연성 혼합재는 강성의 입자에서 연성의 입자로 거동이 전이되는 응력-변형 및 미소변형 전단파 특성을 보였다. 또한, $G_{max}=\;{\Lambda}({\sigma}'_{o}/kPa)^{\zeta}$ 관계에서 모래의 부피비(sf)가 $0.4{\sim}0.6$인 구간에서 $\Lambda$계수가 급격히 증가하며 $\zeta$ 지수는 최대값을 보이는 것으로 관찰되었다. 전이 혼합재는 구속응력의 변화에 매우 민감한 거동을 보이며 연성인 고무입자는 재하 하중에 의해 쉽게 변형되므로 최소 간극율을 가지는 강-연성 혼합재의 부피비는 재하된 응력의 크기에 좌우된다. 실내시험을 이용한 본 연구에서는 입자 크기 비와 모래 부피비가 강성 입자와 연성 입자의 혼합재료 거동을 결정하는 것으로 요인으로 분석되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.377-382
• /
• 2001

Mechanical behavior and electrical resistance change of CPDP (carbon particle dispersed plastic) composite consisting of epoxy resin and conductive carbon particle were investigated under monotonic loading and repeated loading-unloading. The electrical resistance almost linearly increased with increasing strain during loading and the residual electrical resistance was observed even after removing load. The value of the residual electrical resistance was dependent on the maximum strain under the applied stress. This result suggests that the estimation of maximum strain (i.e., damage) is possible by the measuring electrical resistance of composite. The behavior of electrical resistance change during and after loading was discussed on the basis of the results of microscopic deformation and fracture observation. Moreover, the relationship between the volume fraction of carbon particle and the electrical resistivity of CPDP was investigated in relation to the percolation theory. Simulation model of percolation structure was established by Monte Carlo method and the simulation result was compared to the experimental results. The electrical resistance change under applied loading was analyzed quantitatively using the percolation equation and a simple model for the critical volume fraction of carbon particle as a function of the mechanical stress. It was revealed that the prediction was in good agreement with the experimental result except in the region near the failure of material.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.343-348
• /
• 2009

본 연구에서는 분자동역학 전산모사와 미시역학 모델을 이용하여 나노입자의 체적분율이 높은 경우 나노 입자의 크기효과와 체적분율 효과가 나노복합재의 기계적 물성에 미치는 영향을 효과적으로 묘사할 수 있는 순차적 브리징 해석기법을 제안하였다. 체적분율이 12%로 고정된 상태에서 나노입자의 크기변화에 따른 영률과 전단계수를 분자동역학 전산모사를 통해 예측한 후, 이를 연속체 모델에서 구현하기 위해 다중입자모델을 적용하였다. 나노입자의 크기효과를 반영하기 위해 입자와 기지 사이에 유효계면을 추가적인 상으로 도입하였고, 12%의 체적분율 조건에서 나타날 수 있는 체적분율 효과는 나노복합재를 둘러싸는 가상의 영역인 무한영역의 물성값의 변화를 통해 조절되도록 하였다. 유효계면과 무한영역의 물성을 입자의 반경에 대한 함수로 근사한 후 다양한 입자의 크기에서 나타나는 나노복합재의 물성변화의 예측이 가능하도록 하였다. 제안된 브리징 해석기법의 적용을 통해 분자동역학 해석결과와 잘 일치하는 결과를 연속체 모델에서 효율적이고 정확하게 얻을 수 있었다. 또한 유효계면의 두께와 물성 변화가 나노복합재의 기계적 물성에 미치는 영향을 고찰하였다.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.25-31
• /
• 2001

The theoretical modeling to predict the modulus of elasticity by the shape memory effect of dispersed particles in a metal matrix composite was studied. The modeling approach is based on the Eshelbys equivalent inclusion method and Mori-Tanakas mean field theory. The calculation was performed on the TiNi particle dispersed Al metal matrix composites(PDMMC) with varying volume fractions and prestrains of the particle. It was found that the prestrain has no effect on the Yonugs modulus of PDMMC but the volume fraction does affects it. This approach has an advantage of definite control of Youngs modulus in PDMMCs.

• Environmental Engineering Research
• /
• 제14권4호
• /
• pp.262-269
• /
• 2009

This study examined the separation characteristics of particles in the rainfall runoff from paved roads using a ${\varphi}7.5$ cm hydrocyclone. The volume fraction and total suspended solids concentrations in the overflow and underflow from the hydrocyclone, as well as the separation efficiency were determined. The results indicated that the overflow volume increased with increasing operational pressure, but decreased with decreasing ratio of underflow outlet to inlet sizes ($D_u/D_i$), while the underflow to overflow volumes showed contrary behavior. The total suspended solid (TSS) concentration ratio between the overflow and inflow ($TSS_{over/in}$) decreased as a function of the operational pressure, while the corresponding ratio of underflow to inflow ($TSS_{under/in}$) increased. There was no visible difference in the $TSS_{over/in}$ with increasing $D_u/D_i$ ratio, but the $TSS_{under/in}$ decreased sharply. The particle removal efficiency was mainly affected by the particle size.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.27-31
• /
• 2007

Glass particle distribution in a stirred solid/liquid systems was investigated using computational fluid dynamics(CFD). The numerical results were compared to experimental data from the available literature which investigated the local dispersed phase volume fraction by means of an endoscope technique. Eulerian multi-phase model and applications considered high loading of solid particle was used to investigate the influence of the particle concentration and mixing tank size on the solid distribution. A good agreement was obtained between the experimental data and simulation results. The results showed different solid particle distribution in an agitator by particle concentration and mixer size.