• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.421-421
• /
• 2018

효율적인 수자원 관리를 위하여 전국유역조사, 수자원 장기종합계획 등 다양한 사업이 수행되고 있으며, 이를 위하여 유출해석은 필수적인 항목이라 할 수 있다. 유출해석을 위하여 수문모형 또는 관측소의 유량자료가 활용되고 있으나, 이는 기존에 관측된 유량자료를 바탕으로 구축된 수위-유량관계 곡선식(Rating-curve)을 활용하여 재생산된 자료라 할 수 있다. 즉, 수위자료는 매시간 관측소에서 측정이 되지만, 유량자료의 경우 측정이 어려울 뿐만 아니라 변동성 및 불확실성이 크기 때문에 시계열 수위를 곡신식을 통해 유량으로 변환하여 활용하고 있다. 이와 같이 수위-유량관계 곡선식의 정확성이 수문자료 생산에 핵심 요소임에도 불구하고 이에 대한 연구는 제한적이며, 특히 홍수터 등의 영향을 고려하여 분할된 곡선의 천이점 접합시 곡선식의 정확도 향상을 위한 연구도 드문 편이다. 따라서 본 연구에서는 구간 분할된 곡선의 최적 천이점 선정을 위하여 Particle Swarm Optimization(PSO)기법을 활용하였으며, 총 5개 구간까지 구간별 목적함수로 RMSE, RSR, 결정계수 적용시 특성변화에 대한 연구를 수행하였다. 구간에 대하여 절대적인 오차를 산정하는 RMSE를 활용하는 경우 저수위 부분에 대한 오차가 증가하는 것을 확인할 수 있었으며, 상대적인 오차인 RSR, 결정계수를 활용하는 경우 전체 구간에 대한 오차를 보완할 수 있는 것으로 나타났다. PSO기법을 활용하여 도출된 곡선식에 대해서는 구간 및 전체구간에 대한 오차(RMSE, 결정계수, RSR, MAPE)를 활용하여 불확실성을 검토할 수 있도록 하였고, 잔차분석을 통한 이상치 및 회귀곡선에 대한 정규성 검토를 수행할 수 있는 툴을 개발하였다. 레이팅 커브를 작성하는데 있어 최적화 알고리즘을 활용하여 구간분할시 천이점 선정의 자동화로 천이점 선정에 소요되는 시간을 대폭 감축할 수 있을 뿐만 아니라, 구간별 오차를 종합적으로 고려하여 우수한 품질의 레이팅 커브를 도출할 수 있는 기반을 구축하였다.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1392-1401
• /
• 2017

In this study, the design methodology of pattern classification is introduced for avoiding faults through partial discharge occurring in the power facilities and local sites. In order to classify some partial discharge types according to the characteristics of each feature, the model is constructed by using the Radial Basis Function Neural Networks(RBFNNs) and Particle Swarm Optimization(PSO). In the input layer of the RBFNNs, the feature vector is searched and the dimension is reduced through Principal Component Analysis(PCA) and PSO. In the hidden layer, the fuzzy coefficients of the fuzzy clustering method(FCM) are tuned using PSO. Raw datasets for partial discharge are obtained through the Motor Insulation Monitoring System(MIMS) instrument using an Epoxy Mica Coupling(EMC) sensor. The preprocessed datasets for partial discharge are acquired through the Phase Resolved Partial Discharge Analysis(PRPDA) preprocessing algorithm to obtain partial discharge types such as void, corona, surface, and slot discharges. Also, when the amplitude size is considered as two types of both the maximum value and the average value in the process for extracting the preprocessed datasets, two different kinds of feature datasets are produced. In this study, the classification ratio between the proposed RBFNNs model and other classifiers is shown by using the two different kinds of feature datasets, and also we demonstrate the proposed model shows superiority from the viewpoint of classification performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.639-642
• /
• 2003

This paper presents a method for evaluating the mixed nash equilibria of the Cournot model for N-Gencos. in wholesale electricity market. In the wholesale electricity market, the strategies of N-Genco. can be applied to the game model under the conditions which the Gencos. determine their stratgies to maximize their benefit. Generally, the Lemke algorithm is evaluated the mixed nash equlibria in the two-player game model. However, the necessary condition for the mixed equlibria of N-player are modified as the necessary condition of N-1 player by analyzing the Lemke algorithms. Although reducing the necessary condition for N-player as the one of N-1 player, it is difficult to and the mixed nash equilibria participated two more players by using the mathmatical approaches since those have the nonlinear characteristics. To overcome the above problem, this paper presents the generalized necessary condition for N-player and proposed the object function to and the mixed nash equlibrium. Also, to evaluate the mixed equilibrium through the nonlinear objective function, the Particle Swarm Optimization (PSO) as one of the heuristic algorithm are proposed in this paper. To present the mixed equlibria for the strategy of N-Gencos. through the proposed necessry condition and the evaluation approach, this paper proposes the mixed equilibrium in the cournot game model for 3-players.

• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.681-698
• /
• 2020

The paper addresses contribution to the modeling and optimization of major machinability parameters (cutting force, surface roughness, and tool wear) in finish dry hard turning (FDHT) for machinability evaluation of hardened AISI grade die steel D₃ with PVD-TiN coated (Al₂O₃-TiCN) mixed ceramic tool insert. The turning trials are performed based on Taguchi's L₁₈ orthogonal array design of experiments for the development of regression model as well as adequate model prediction by considering tool approach angle, nose radius, cutting speed, feed rate, and depth of cut as major machining parameters. The models or correlations are developed by employing multiple regression analysis (MRA). In addition, statistical technique (response surface methodology) followed by computational approaches (genetic algorithm and particle swarm optimization) have been employed for multiple response optimization. Thereafter, the effectiveness of proposed three (RSM, GA, PSO) optimization techniques are evaluated by confirmation test and subsequently the best optimization results have been used for estimation of energy consumption which includes savings of carbon footprint towards green machining and for tool life estimation followed by cost analysis to justify the economic feasibility of PVD-TiN coated Al₂O₃+TiCN mixed ceramic tool in FDHT operation. Finally, estimation of energy savings, economic analysis, and sustainability assessment are performed by employing carbon footprint analysis, Gilbert approach, and Pugh matrix, respectively. Novelty aspects, the present work: (i) contributes to practical industrial application of finish hard turning for the shaft and die makers to select the optimum cutting conditions in a range of hardness of 45-60 HRC, (ii) demonstrates the replacement of expensive, time-consuming conventional cylindrical grinding process and proposes the alternative of costlier CBN tool by utilizing ceramic tool in hard turning processes considering technological, economical and ecological aspects, which are helpful and efficient from industrial point of view, (iii) provides environment friendliness, cleaner production for machining of hardened steels, (iv) helps to improve the desirable machinability characteristics, and (v) serves as a knowledge for the development of a common language for sustainable manufacturing in both research field and industrial practice.

• International Journal of Computer Science & Network Security
• /
• 제23권4호
• /
• pp.55-68
• /
• 2023

In recent years, the Television White Space (TVWS) has attracted the interest of many researchers due to its propagation characteristics obtainable between 470MHz and 790MHz spectrum bands. The plenty of unused channels in the TV spectrum allows the secondary users (SUs) to use the channels for broadband services especially in rural areas. However, when the number of SUs increases in the TVWS wireless network the aggregate interference also increases. Aggregate interferences are the combined harmful interferences that can include both co-channel and adjacent interferences. The aggregate interference on the side of Primary Users (PUs) has been extensively scrutinized. Therefore, resource allocation (power and spectrum) is crucial when designing the TVWS network to avoid interferences from Secondary Users (SUs) to PUs and among SUs themselves. This paper proposes a model to improve the resource allocation for reducing the aggregate interface among SUs for broadband services in rural areas. The proposed model uses joint power and spectrum hybrid Firefly algorithm (FA), Genetic algorithm (GA), and Particle Swarm Optimization algorithm (PSO) which is considered the Co-channel interference (CCI) and Adjacent Channel Interference (ACI). The algorithm is integrated with the admission control algorithm so that; there is a possibility to remove some of the SUs in the TVWS network whenever the SINR threshold for SUs and PU are not met. We considered the infeasible system whereby all SUs and PU may not be supported simultaneously. Therefore, we proposed a joint spectrum and power allocation with an admission control algorithm whose better complexity and performance than the ones which have been proposed in the existing algorithms in the literature. The performance of the proposed algorithm is compared using the metrics such as sum throughput, PU SINR, algorithm running time and SU SINR less than threshold and the results show that the PSOFAGA with ELGR admission control algorithm has best performance compared to GA, PSO, FA, and FAGAPSO algorithms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3529-3550
• /
• 2016

In heterogeneous networks (HetNets), energy saving is vital for a sustainable network development. Many techniques, such as spectrum allocation, network planning, etc., are used to improve the network energy efficiency (EE). In this paper, micro BSs utilizing cell range expansion (CRE) and spectrum allocation are considered in multi-channel heterogeneous networks to improve EE. Hotspot region is assumed to be covered by micro BSs which can ensure that the hotspot capacity is greater than the average demand of hotspot users. The expressions of network energy efficiency are derived under shared, orthogonal and hybrid subchannel allocation schemes, respectively. Particle swarm optimization (PSO) algorithm is used to solve the optimal ratio of subchannel allocation in orthogonal and hybrid schemes. Based on the results of the optimal analysis, we propose three service control strategies on the basis of large-scale user behaviors, i.e., adjust micro cell rang expansion (AmCRE), adjust micro BSs density (AmBD) and adjust micro BSs transmit power (AmBTP). Both theoretical and simulation results show that using shared subchannel allocation scheme in AmBD strategies can obtain maximal EE with a very small area ratio. Using orthogonal subchannel allocation scheme in AmCRE strategies can obtain maximal EE when area ratio is larger. Using hybrid subchannel allocation scheme in AmCRE strategies can obtain maximal EE when area ratio is large enough. No matter which service control strategy is used, orthogonal spectrum scheme can obtain the maximal hotspot user rates.

• 전기학회논문지
• /
• 제64권6호
• /
• pp.922-934
• /
• 2015

In this paper, The classification between precipitation echo(PRE) and non-precipitation echo(N-PRE) (including ground echo and clear echo) is carried out from weather radar data using neuro-fuzzy algorithm. In order to classify between PRE and N-PRE, Input variables are built up through characteristic analysis of radar data. First, the event classifier as the first classification step is designed to classify precipitation event and non-precipitation event using input variables of RBFNNs such as DZ, DZ of Frequency(DZ_FR), SDZ, SDZ of Frequency(SDZ_FR), VGZ, VGZ of Frequency(VGZ_FR). After the event classification, in the precipitation event including non-precipitation echo, the non-precipitation echo is completely removed by the echo classifier of the second classifier step that is built as Type-2 FCM based RBFNNs. Also, parameters of classification system are acquired for effective performance using PSO(Particle Swarm Optimization). The performance results of the proposed echo classifier are compared with CZ. In the sequel, the proposed model architectures which use event classifier as well as the echo classifier of Interval Type-2 FCM based RBFNN show the superiority of output performance when compared with the conventional echo classifier based on RBFNN.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.833-842
• /
• 2017

In this study, the design methodology of radial basis function neural networks based on incremental K-means clustering is introduced for learning and processing the big data. If there is a lot of dataset to be trained, general clustering may not learn dataset due to the lack of memory capacity. However, the on-line processing of big data could be effectively realized through the parameters operation of recursive least square estimation as well as the sequential operation of incremental clustering algorithm. Radial basis function neural networks consist of condition part, conclusion part and aggregation part. In the condition part, incremental K-means clustering algorithms is used tweights of the conclusion part are given as linear function and parameters are calculated using recursive least squareo get the center points of data and find the fitness using gaussian function as the activation function. Connection s estimation. In the aggregation part, a final output is obtained by center of gravity method. Using machine learning data, performance index are shown and compared with other models. Also, the performance of the incremental K-means clustering based-RBFNNs is carried out by using PSO. This study demonstrates that the proposed model shows the superiority of algorithmic design from the viewpoint of on-line processing for big data.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.972-980
• /
• 2010

In this study, we introduce the design methodology of an optimized type-2 fuzzy cascade controller with the aid of hierarchical fair competition-based genetic algorithm(HFCGA) for ball & beam system. The ball & beam system consists of servo motor, beam and ball, and remains mutually connected in line in itself. The ball & beam system determines the position of ball through the control of a servo motor. Consequently the displacement change of the position of the moving ball and its ensuing change of the angle of the beam results in the change of the position angle of a servo motor. The type-2 fuzzy cascade controller scheme consists of the outer controller and the inner controller as two cascaded fuzzy controllers. In type-2 fuzzy logic controller(FLC) as the expanded type of type-1 fuzzy logic controller(FLC), we can effectively improve the control characteristic by using the footprint of uncertainty(FOU) of membership function. The control parameters(scaling factors) of each fuzzy controller using HFCGA which is a kind of parallel genetic algorithms(PGAs). HFCGA helps alleviate the premature convergence being generated in conventional genetic algorithms(GAs). We estimated controller characteristic parameters of optimized type-2 fuzzy cascade controller applied ball & beam system such as maximum overshoot, delay time, rise time, settling time and steady-state error. For a detailed comparative analysis from the viewpoint of the performance results and the design methodology, the proposed method for the ball & beam system which is realized by the fuzzy cascade controller based on HFCGA, is presented in comparison with the conventional PD cascade controller based on serial genetic algorithms.

• 한국시뮬레이션학회논문지
• /
• 제24권2호
• /
• pp.1-9
• /
• 2015

다양한 변수들이 존재하는 현대의 전투전장에서는 운용전술에 따라 전투의 양상이 결정되기 때문에 최적화된 운용전술을 도출하는 연구가 필요하다. 기존의 M&S(Modeling & Simulation) 연구에서는 몬테 칼로 실험을 통해 변수들을 분석하는 것이 일반적이다. 그러나 이 방법은 상호 복합적으로 작용하는 다수의 변수들의 모든 조합에 대해 시뮬레이션을 수행하기 때문에, 많은 수행시간이 소요되고 최적의 운용전술 도출을 위한 별도의 분석이 필요하다. 본 논문에서는 최적화 요소를 찾는 전산탐색 기법 중 하나인 DPSO(Discrete binary version of PSO) 알고리즘을 기반으로 하는 최적화 시뮬레이션 프레임워크를 제안하였다. 최적화 시뮬레이션 프레임워크는 짧은 시간 내에 최적화된 운용전술을 도출하기 위하여 설계되었다. 본 연구에서는 아군 수상함이 적 어뢰로부터 회피하는 사례를 적용하여 최적화 시뮬레이션 프레임워크의 탐색 성능을 확인하였다. 이를 통해 최적화 시뮬레이션 프레임워크의 효율성을 제시하였다.