• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.40-47
• /
• 2017

Dust explosion hazards are always present when combustible dusts are manufactured or handled in the process. However, industries is experiencing difficulty in establishing chemical accident prevention measures because of insufficiency of information on dust explosion characteristics of combustible dust handled in industry. In this study, we investigated experimentally dust explosion characteristics of two kinds of multi-walled carbon nano tubes (MWCNT) different in particle size distribution and examined classification of dust explosion hazardous area for MWCNT manufacturing or handling process by applying the NFPA 499 code. As a result, $P_{max}$, $K_{st}$, LEL, MIE and MIT of MWCNT 1 having $124.2{\mu}m$ median diameter are obtained 6.3 bar, $56bar{\cdot}m/s$, $125g/m^3$, over 1000 mJ, and over $650^{\circ}C$. $P_{max}$, $K_{st}$, LEL, MIE and MIT of MWCNT 2 having $293.5{\mu}m$ median diameter are 6.2 bar, $42bar{\cdot}m/s$, $100g/m^3$, over 1000 mJ, and over $650^{\circ}C$, respectively. MWCNT 1, 2 are not categorized as combustible dust listed in the NFPA 499 Code for classification of dust explosion hazardous area because explosion severity and ignition sensitivity of MWCNT 1, 2 are below 0.35 and 0.01, respectively.

• Explosives and Blasting
• /
• v.22 no.4
• /
• pp.7-15
• /
• 2004

An explosion modeling technique was developed by using the spherical discrete element code, PFC3D, which can be used to model the dynamic stress wave propagation phenomenon. The modeling technique is simply based on an idea that the explosion pressure should be applied to a PFC3D particle assembly not in the form of an external force (body force), but in the form of a contact force (surface force). According to this concept, the explosion pressure is applied to the wall particles by the scheme of radius expansion/contraction of inner-hole particles. The output wall force is compared to the input hole pressure in every time step, and a correction routine is activated to control the radius multiplier of the inner-hole particles. A comparative blast simulation far a cement mortar block of $80\times90\times80mm$ was conducted by using the conventional explosion modeling method and the new one. The results of the simulation are presented in a qualitative fashion.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2000.11a
• /
• pp.14-18
• /
• 2000

No Abstract, See Full Text

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.395-396
• /
• 2004

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.04a
• /
• pp.236-239
• /
• 2007

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.689-690
• /
• 2005

• Journal of Korea Game Society
• /
• v.14 no.6
• /
• pp.49-58
• /
• 2014

In particle-based fluid simulation, the yield stress is required for the deformation of the viscoelastic material like gel. von Mises's yield condition has been proposed to implement deformation of viscoelastic objects, but did not express the explosion. Furthermore, von Mises's yield condition is hard to approximate. We propose an ideal yield condition for viscoelastic object that reference from Tresca's yield condition. Unlike conventional particle-based simulation approximate the external power by the deformed length of the object, this paper is approximate the external power by area of the object. We check up that explosion was realistic when a viscoelastic object is compressed under the ideal yield condition.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.4
• /
• pp.57-69
• /
• 1989

Roughage feeds were produced from Hyun-aspen (Populus alba $\times$ p. glandulosa) by steaming-defibration and steaming-explosion. The objectives of this work were to find proper conditions for the treatment of Hyun-aspen by analyzing the compositional change and digestibility and to investigate the change of physical properties of exploded woods. The results of this work were as follows; 1. The method of steaming-de fibration gave the best producing rate of feedstuffs when the chips were steamed (9kg/$cm^2$ under the pressure) for 10 minutes. The yield and the digestibility of feedstuffs were 84.2% and 38.1%, respectively. It is the merit of this method that feedstuffs manufactured by this method was uniformity in particle size, and facilities of fiberboard factory could be used directly, 2. For defibration of the chip by explosion, the proper condition was steamed under the pressure (20kg/$cm^2$) for 4 minutes. The yield and the digestibility of feedstuffs were 93.4% and 68.1%, respectively. The feedstuffs produced under these conditions had higher nutritional quality than rice straw and this method was considered as the best for making feedstuffs from Hyun-aspen chip. But it is defect that exploded feedstuffs was ununiformity in particle size and had unique odor. The physical properties of the feedstuffs were investigated by a light microscope and a TEM. The feedstuffs produced under the low pressure (20 kg/$cm^2$) still maintained the structure of fibers. However, the feedstuffs produced under the high pressure (28 kg/$cm^2$) resulted in higher de fib ration than these prepared under the low pressure. The highly defibrated feedstuffs recombined with solublized lignin. The crystallinity of feedstuffs was increased by 10% and micelle width increased double after treatment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1272-1275
• /
• 2010

The Cu powder was prepared in distilled water. It has a wide range of size distribution. The submicron-sized particles in the Cu powder were removed by using continuous type centrifugal separator. The average particle size after classification was approximately 50nm. The XRD analysis showed that pure Cu phase and oxide phase ($Cu_2O$)weremixedinthepowderpreparedbythismethod.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3264-3274
• /
• 2021

In a severe accident of light water reactor (LWR), molten core material (corium) can be released into the wet cavity, and a fuel-coolant interaction (FCI) can occur. The molten jet with high speed is broken and fragmented into small debris, which may cause a steam explosion or a molten core concrete interaction (MCCI). Since the premixing stage where the jet breakup occurs has a large impact on the severe accident progression, the understanding and evaluation of the jet breakup phenomenon are highly important. Therefore, in this study, the jet breakup simulations were performed using the Smoothed Particle Hydrodynamics (SPH) method which is a particle-based Lagrangian numerical method. For the multi-fluid system, the normalized density approach and improved surface tension model (CSF) were applied to the in-house SPH code (single GPU-based SOPHIA code) to improve the calculation accuracy at the interface of fluids. The jet breakup simulations were conducted in two cases: (1) jet breakup without structures, and (2) jet breakup with structures (control rod guide tubes). The penetration depth of the jet and jet breakup length were compared with those of the reference experiments, and these SPH simulation results are qualitatively and quantitatively consistent with the experiments.