• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.19-20
• /
• 2013

The cofiring of renewable fuel in coal fired boilers is an attractive option to mitigate $CO_2$ emissions, since it is relatively low cost option for efficiently converting renewable fuel to electricity by adding biomass as partial substitute of coal. However, it would lead to reduce plant efficiency and flexibility in operation, and increase operation cost and capital cost associated with renewable fuels handling and firing equipment. The aim of this study is to investigate reduction of carbon dioxide at varying percentage of biomass in fuel blend to the boiler biomass, and estimate operation and capital cost. Wood pellet, PKS (palm kernel shell), EFB (empty fruit bunch) and sludge are considered as a renewable fuels for a cofiring with coal. Several approaches by the cofiring ratio are chosen from past plant demonstrations and commercial cofiring operation, and they are evaluated and discussed for CO2 reduction and cost estimation.

• Korean Journal of Microbiology
• /
• v.9 no.3
• /
• pp.95-102
• /
• 1971

The growth characteristics of Candida tropicalis KIST 351 on gas oil substrate under different culture conditions were investigated and the preliminary animal feeding experiments using this yeast as a partial substitute of fish meal was also conducted. The yeast assimilates effectively n-paraffins in gas oil ranging from $C_{16}$ to $C_{16}$ with its maximum cell growth at $33^{\circ}C$ and pH 5.5 with aeration of 3 vvn and agitation of 900 rpm. The optimal concentrations of nitrogen sources, $HK_2PO_4$ and $Na_2HPO$ were 4, 2 and 0.5g/1, respectively. Ferrous sulfate, manganese sulfate and zinc sulfate showed positive effect to cell growth with the optimal range of 5-10 ppm. In the feeding experiment with 3 and 5% incorporation of the gas oil grown yeast, neither adverse effects on growth of chicks nor toxic effect were observed. Protein content of the dried cell was 58.8% and its amino acid composition compared well with other single-cell protein products and FAO reference protein.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.2
• /
• pp.17-25
• /
• 2019

In this study, we propose a new scheme of nonlinear analysis for Incheon International Airport Terminal-2 which was opened on January of 2018 for the Olympic Winter Games of PyeongChang in South Korea. The terminal was built by a single layered irregular space frame. It has hard problems for nonlinear analysis geometrically, because of a limitation of personal computer's ability by the number of rigid joints in the roof. Therefore we attempt easier approach to be chosen a center part of the roof instead of the whole structure, and to substitute the other boundary parts as springs. The scheme shows some merits for saving memory and calculation time and so on.

• Structural Engineering and Mechanics
• /
• v.78 no.2
• /
• pp.175-186
• /
• 2021

Due to the increasing environmental pollution caused by scrap tires, a solution is being sought to recycle and use them in a field of civil engineering, i.e., construction. This paper will provide a brief overview of previous researches that give detailed information on the advantages and disadvantages, considering the microstructural and mechanical characteristics of self-compacting concrete, when waste tire rubber as an aggregate is added. With this aim, a database of 144 different mixtures of self-compacting concrete with partial substitute of natural aggregate with recycled tire rubber (self-compacting rubberized concrete, SCRC) provided by various researchers was created. In this study we show that Gaussian process regression (GPR) modelling is an appropriate method for predicting compressive strength of SCC with recycled tire rubber particles and is in accordance with the results displayed by SEM images.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2156-2172
• /
• 2022

This paper investigates the optimum fiber reinforcement for prestressed concrete containment vessels (PCCVs) under internal pressure. To achieve this aim, steel fiber, which is the most widely used fiber type in current engineering applications, is adopted to constitute steel fiber-reinforced concrete (SFRC) to substitute the conventional concrete in the PCCV. The effects of characteristic parameters, 𝜆_sf, of the steel fiber affecting significantly the mechanical behavior of the concrete are first taken into account. Partial or complete concrete regions of the PCCV are also considered to be replaced by SFRC to balance the economy and safety. By adopting the ABAQUS software, the ultimate bearing capacity and performance for the fiber-reinforced PCCV are scientifically studied and quantified, and the recommendations for the optimum way of fiber reinforcement are presented.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.141-146
• /
• 2015

This study was carried out to elucidate the partial substitutability of SB latex with environmental-friendly coating binders for coated paper. Starch-based biobinder, ethylene vinyl acetate and acryl-based binder were evaluated for this purpose. Several combinations of above binders were applied to top layer coating, and properties of coating colors and printability were evaluated. When 20% and 30% of SB latex were substituted by acryl-based synthetic binder, ethylene vinyl acetate and biobinder, the brightness, whiteness and opacity of coated paper were similar to those obtained from SB latex. Ink set and stiffness of coated paper manufactured through 20% and 30% substitution of SB latex by biobinder and EVAc were improved, but dry- and wet-pick strength were decreased. The research works on the improvement of dry- and we-pick strength, mechanical stability and rheological properties at high shear condition should be continued for the commercial application of biobinder, EVAc and acryl-based binder.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.2
• /
• pp.129-134
• /
• 2003

In this research, we used fly-ash and blast-furnace slag as substitute material of cement and fine aggregate, and we, through experiments, researched and analyzed the features of high-flowable concrete added high efficiency AE water reduction agent. The results are below. 1. Liquefaction generally presented high-slump flow value; on the other hand, partial segregation was observed in case of mixing proportion with 65 cm slump flow and above. This segregation was partially improved in accordance with mixing admixture. 2. Compressive strength according to mixing admixture and increasing mixing ratio of fly-ash were subject to be declined when it was initially cast-in, but its gap was improved when time was fully passed. 3. After mixing blast-furnace slag and fly-ash as substitute material, the result showed that the modulus of elasticity against freezing & melting was improved according to mixing blast-furnace slag and also increased in accordance with increasing pulverulent-body volume. 4. According to increasing the mixing volume of fly-ash, the durability factor was deteriorated because compressive strength became lower as well as air content was decreased when it was initially case-in. 5. The minimum air content to secure durability was 3.7%, for that reason, we had better secure admixture such as air entraining agent when cast-in high-flowable concrete.

• Structural Engineering and Mechanics
• /
• v.87 no.3
• /
• pp.221-229
• /
• 2023

Urbanization and industrialization have significantly increased the amount of solid waste produced in recent decades, posing considerable disposal problems and environmental burdens. The practice of waste utilization in concrete has gained popularity among construction practitioners and researchers for the efficient use of resources and the transition to the circular economy in construction. This study employed Lytag aggregate, an environmentally friendly pulverized fuel ash-based lightweight aggregate, as a substitute for natural coarse aggregate. At the same time, fly ash, an industrial by-product, was used as a partial substitute for cement. Concrete mix M20 was experimented with using fly ash and Lytag lightweight aggregate. The percentages of fly ash that make up the replacements were 5%, 10%, 15%, 20%, and 25%. The Compressive Strength (CS), Split Tensile Strength (STS), and deflection were discovered at these percentages after 56 days of testing. The concrete cube, cylinder, and beam specimens were examined in the explorations, as mentioned earlier. The results indicate that a 10% substitution of cement with fly ash and a replacement of coarse aggregate with Lytag lightweight aggregate produced concrete that performed well in terms of mechanical properties and deflection. The cementitious composites have varying characteristics as the environment changes. Therefore, understanding their mechanical properties are crucial for safety reasons. CS, STS, and deflection are the essential property of concrete. Machine learning (ML) approaches have been necessary to predict the CS of concrete. The Artificial Fish Swarm Optimization (AFSO), Particle Swarm Optimization (PSO), and Harmony Search (HS) algorithms were investigated for the prediction of outcomes. This work deftly explains the tremendous AFSO technique, which achieves the precise ideal values of the weights in the model to crown the mathematical modeling technique. This has been proved by the minimum, maximum, and sample median, and the first and third quartiles were used as the basis for a boxplot through the standardized method of showing the dataset. It graphically displays the quantitative value distribution of a field. The correlation matrix and confidence interval were represented graphically using the corrupt method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.469-474
• /
• 2000

This study was conducted to investigate the utilization of defatted soybean meal as a substitute for fish meal in the diet for juvenile flounder (Paralichthys olivaceus). Duplicate groups of average weighing 35 g were fed one of four isonitrogenous ($54{\%}$) and isocaloric (575 kcal/100 g diet) diets containing $0{\%}, 10{\%}, 20{\%} and 30{\%}$ soybean meal for 45 days. Survival rates of all groups were $100{\%}$, Weight gain of fish decreased with increasing dietary soybean meal levels, However, this value was not significantly different between fish fed the control and $10{\%}$ soybean meal diet (P > 0.05). Feed efficiency and protein efficiency ratio decreased with increasing dietary soybean meal levels, but no significant differences were found among fish fed the control, $10{\%}\;and\;20{\%}$ soybean meal diets (P > 0.05). Daily feed and protein intake increased with increasing dietary soybean meal level. Crude protein and moisture content of liver tended to decrease and crude lipid content tended to increase with decreasing of dietary soybean meal levels. Plasma total cholesterol levels of fish fed the diets containing $20{\%}\;and\;30{\%}$ soybean meal were significantly lower than that of fish fed control diet (P < 0.05), Plasma GOT level significantly increased with increasing dietary soybean meal level (P < 0.05). It is concluded that soybean meal can be used as a partial substitute for fish meal up to $10{\%}$ in this dietary formulation for growth of juvenile flounder.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.152-159
• /
• 2008

In this paper, we have studied a new method in which multimedia message can be processed effectively in SIP(Session Initiation Protocol)-based Instant Messaging service. Total system is composed of multimedia message server, presence server and user system. To provide effectively message informations such as number of messages stored in the multimedia message server, waiting status and message types to users, we have proposed a new method which can be a substitute for message waiting indication event package. In our proposed method, when changes of messages status informations occur, these informations are sent to the presence server, and can be transferred as a separate tag within notification message. The presence server processes subscription requests and notifications, and efficiency can be improved as it provides both message status informations and several communication status informations such as on-line status to service users. Partial publication is used in our system to improve data transfer efficiency more between user system and the presence server. The performance of our proposed model is evaluated by experiments measuring multimedia message transfer speed and server processing time.