• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.821-825
• /
• 2009

Recently, transparent ZnO-based TFTs have attracted much attention for flexible displays because they can be fabricated on plastic substrates at low temperature. We report the fabrication and characteristics of ZnO TFTs having different channel thicknesses deposited at low temperature. The ZnO films were deposited as active channel layer on $Si_3N_4/Ti/SiO_2/p-Si$ substrates by RF magnetron sputtering at $100^{\circ}C$ without additional annealing. Also, the ZnO thin films deposited at oxygen partial pressures of 40%. ZnO TFTs using a bottom-gate configuration were investigated. The $Si_3N_4$ film was deposited as gate insulator by PE-CVD at $150^{\circ}C$. All Processes were processed below $150^{\circ}C$ which is optimal temperature for flexible display and were used dry etching method. The fabricated devices have different threshold slop, field effect mobility and subthreshold slop according to channel thickness. This characteristics are related with ZnO crystal properties analyzed with XRD and SPM. Electrical characteristics of 60 nm ZnO TFT (W/L = $20\;{\mu}m/20\;{\mu}m$) exhibited a field-effect mobility of $0.26\;cm^2/Vs$, a threshold voltage of 8.3 V, a subthreshold slop of 2.2 V/decade, and a $I_{ON/OFF}$ ratio of $7.5\times10^2$.

• Journal of Genetic Medicine
• /
• 제9권1호
• /
• pp.25-30
• /
• 2012

Among the treatment options for BRCA mutation carriers, risk reducing surgery is the most effective. However, this procedure has been rarely performed in Korea. Interestingly, our case showed double heterozygosity for BRCA1 and BRCA2 mutations. The patient was diagnosed with left renal cancer and left breast cancer at 45-years-of-age, 4 years before risk reducing surgery. The patient received left radical nephrectomy and left partial mastectomy with axillary lymph node dissection. After pretest counseling, the patient underwent genetic testing that identified BRCA1 and BRCA2 mutations. After post-test counseling, the patient decided on intensive surveillance. At 49-years-of-age, the patient was newly diagnosed with contralateral breast cancer. Treatment options were discussed once again. We performed bilateral total mastectomy with immediate reconstruction and prophylactic bilateral salpingo-oophorectomy after multidisciplinary discussion. The patient has been satisfied with the results of surgery. We think this procedure is a recommendable treatment option for BRCA mutation carriers.

• Tribology and Lubricants
• /
• 제35권1호
• /
• pp.65-70
• /
• 2019

Self-loosening of bolts owing to external forces occurs in several machines that are clamped by bolts and nuts. This study focuses on the self-loosening of the aiming bolt of the head lamp in a vehicle. It is important to prevent the aiming bolt from self-loosening as it has a decisive effect on the angle of the head lamp. A nut clamped with a bolt, known as a retainer, is made of plastic and has a partial screw thread. In addition, a transverse load has a considerable impact on the self-loosening of a bolt. We concentrate on the self-loosening of a bolt by a transverse load. The aim of this study is to define the limits of the external force that loosen the bolt. Based on the above conditions, we derive a theoretical equation and develop a numerical analysis program that can calculate the limiting forces for self-loosening. To verify the developed program, we design a test device that can measure the self-loosening by applying sliding forces to the aiming bolt. Using this method, we can draw the following conclusions. First, the developed testing device is suitable to prove the theory for calculating the self-loosening force. Second, the equation confirms the relationship of bolt self-loosening between resistance torque and shear force. Finally, the equation obtains the minimum value of the resistance torque required to decrease the change in the angle of the head lamp, thereby improving the possibility of increasing the stability of the head lamp.

• 식품과학과 산업
• /
• 제50권2호
• /
• pp.12-26
• /
• 2017

Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권3호
• /
• pp.281-287
• /
• 1995

A study was conducted to investigate the effect of different inclusion levels of urea treated whole-crop wheat silage (UWCWS) in grass silage based rations on the performance of growing beef cattle. The winter wheat (variety, Riband) was harvested (in the summer of 1991) at a dry matter proportion of 520 g/kg and treated with feed grade urea at the rate of 37 kg/tonne crop dry matter and preserved in a heavy duty plastic bag using a silo press. The urea treated whole crop wheat silage (UWCWS) was mixed with grass silage to replace 0.00 (S100), 0.33 (S33) and 0.67 (S67) parts of the forage dry matter and fed ad libitum in a cross over design to 18 Simmental X Holstein Friesian growing beef animals. Two energy sources {one high in starch, rolled barley (RB) and one high in digestible fibre, sugar beet pulp (SBP)} were fed to supply sufficient energy for the efficient use of nitrogen by the rumen micro-organisms. The data on DMIF (dry matter intake of forage), TDMI (total dry matter intake), DLWG (daily live weight gain), FCR (feed conversion ratio) were recorded and faecal samples were collected to determine the digestibility coefficients. Results revealed that with the inclusion of UWCW in the animals' diets the DMI of the forage was significantly increased (p < 0.05). The highest DMIF was found in the treatment "S33" ($6.28{\pm}0.25kg$) where 67% of the silage dry matter was replaced with the UWCW and the lowest value for DMIF was observed in the control treatment ($5.03{\pm}0.23kg$). The DLWG did not differ significantly between the treatments. However, treatment "S100" showed a trend towards a superior DLWG. Feed conversion ratio in the control treatment differed significantly from "S67" and "S33". The addition of the UWCW in the animals' diet resulted in the lower FCR There was no effect of type of energy supplement on any aspect of performance either overall or in interaction with grass silage: UWCWS ratio. The regression and correlation coefficients for DMIF (r = 5.22 + 0.0184x*), DLWG (r = $1.04-0.00086x^{NS}$) and FCR (r = 4.78 = 0.022x*) on the inclusion of UWCW in the diet were calculated. The effect of the inclusion of UWCW on the overall digestibility coefficients was significant (p < 0.05). The addition of the UWCWS in the diet decreased the digestibility of the DM, OM, ADF and NFE but effect on the protein digestibility was non significant. The results of present study suggests that a DLWG slightly over 1 kg can be achieved with UWCW during the store period (period in which animal performance targets are low especially during winter) and the prediction of ME was overestimated as the high intake of DM did not reflect in improved animal performance.

• 식물병연구
• /
• 제16권3호
• /
• pp.254-258
• /
• 2010

Melon necrotic spot virus (MNSV)는 국내에서 재배되고 있는 멜론(Cucumis melo)에 심각한 피해를 주고 있다. 2009년 전남 나주 멜론재배단지에서 괴저반점을 나타내는 멜론 잎에서 MNSV를 분리 동정하였다. 지표식물 반응, immuno captured(IC) RT-PCR 및 염기서열 상동성 비교 등 몇몇 분석으로 이 분리주를 MNSV-Me로 명명하였다. 멜론 시판 35품종에 대한 MNSV-Me의 저항성 선발을 위하여 유묘의 자엽에 인위적 즙액 접종 방법을 이용하였다. 접종된 모든 품종의 자엽에서는 괴저반점을 형성하였다. 이들 중 25품종은 상엽으로 괴저 증상의 이행 또는 일부 개체에서는 접종 약 40일 후 줄기에 3 cm 이상의 괴저를 나타내는 감수성 반응을 나타냈다. 5품종은 상엽으로 잘 이행이 되지 않지만 줄기에 3 cm 미만의 괴저증상을 형성하는 중간 저항성을 발현하였다. 접종한 상엽으로는 바이러스 증상이 발현되지 않고, 단지 줄기에 희미한 괴저가 형성되는 얼스타이탄, 얼스럭서리, 베타리치 하계, 베타리치 및 원더플하계1호가 저항성을 나타냈다.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.858-866
• /
• 1998

Soldering is the usual method used to correct an unstable fixed partial denture framework at patient's try-in; However, presoldering base metal alloys is technique-sensitve and results are unstable because it is difficult to maintain uniform heat distribution and to prevent oxidation of an alloy. A cast-joining technique has been developed by Weiss and Munyon for repair, correction and addition to base metal framework. This joining technique eliminates the problem with presoldering of non-precious frameworks. The object of this study was to 1) compare the relative flexure strength and the joining effectiveness of Ni-Cr-Be cast in two pieces and 'pre-soldered' versus in two pieces and 'cast-joined'. 2) determine the effect of increasing the number of retentive grooves on the face of the cast and 3) determine the effect of the relative matched position of groove patterns on flexure strength. The joining effectiveness can be expressed by the ratio of the mean flexure stress of soldered or cast-joined specimens to that of one-piece cast. Resin rods 3mm in diameter were used as pattern of specimens for one-piece casted, presoldered, and cast-joined groups. Cast-joined specimens had two different patterns of retentive grooves on the joined faces. Type A had cross-shaped grooves 1mm in depth. 0.6mm in width. Type B was the same except for the addition of one more retentive groove. In the experiment connecting cast-joined specimens, half of specimens with type A pattern had their patterns on the faces of paired casts matched with each other as mirror image. With the rest pairs, it was proceeded that one of paired casts turned 45 degrees so that the patterns crossed. Half of specimens with type B pattern also had the patterns matched as mirror image; However, here, one of paired casts turned 90 degrees with the other pairs. Retentive groove in this study lacked the intentional undercuts, in contrast with the suggestion of Weiss and Munyon. The specimens were subjected to four-point flexural loading in an Instron testing machine. The midspan flexural stress was calculated at the point of initial plastic strain as determined from a strip-chart recorder or at the point of failure if this occured at a lower stress level. Within the scope of this study, the following results were obtained. 1. The presoldered group showed flexural strength at least 2 times higher than the cast-joined groups. Its joining effectiveness was 82%. 2. In cast-joined groups, the flexural strength of joints with type B patterns exhibited 1.5 times that of joints with type A patterns. Joining effectivenesses were 38% for type B patterns, 25-26% for type A patterns. 3. The relative matched position of groove patterns did not have any significant effect on flexural strength of the cast-joined specimens with either type A patterns or type B patterns(p>.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제44권3호
• /
• pp.112-119
• /
• 2018

Objectives: Temporomandibular joint ankylosis (TMJA) is a joint pathology caused by bony and/or fibrous adhesion of the joint apparatus, resulting in partial or total loss of function. Materials and Methods: This is a retrospective study conducted between 2012 and 2016 in the northwest region of Nigeria. The data retrieved includes gender, age, etiology of ankylosis, duration of ankylosis, laterality of ankylosis, type of imaging technique, type of airway management, types of incision, surgical procedure, mouth opening, interpositional materials used, and complications. Results were presented as simple frequencies and descriptive statistics. Results: Thirty-six patients with TMJA were evaluated during the study period. There were 21 males (58.3%) and 15 females (41.7%), yielding a male:female ratio of 1.4:1. The patients' age ranged from 5 to 33 years with $mean{\pm}standard$ deviation ($13.8{\pm}6.6years$). Thirty-five cases (97.2%) were determined to be true/bony ankylosis, while only 1 case (2.8%) was false/fibrous ankylosis. Most of the TMJA cases (16 cases, 44.4%) were secondary to a fall. In our series, the most commonly utilized incision was the Bramley-Al-Kayat (15 cases, 41.7%). The mostly commonly performed procedures were condylectomies and upper ramus ostectomies (12 cases each, 33.3%), while the most commonly used interpositional material was temporalis fascia (14 cases, 38.9%). The complications that developed included 4 cases (11.1%) of severe hemorrhage, 1 case (2.8%) of facial nerve palsy, and 1 case (2.8%) of re-ankylosis. Conclusion: Plain radiographs, with their shortcomings, still have significant roles in investigating TMJA. Aggressive postoperative physiotherapy for a minimum of 6 months is paramount for successful treatment.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.1177-1192
• /
• 2018

본 연구의 목적은 한랭지역에서 운영 중인 터널구조물의 누수를 유도배수하기 위하여 기존 유도배수시스템을 향상시키는 것이다. 유도배수시스템은 유도배수판, 방수재료인 Hotty-gel, Hotty-gel 돌출 방지판, 공압타카, 고정핀, 집수관, 유도배수관, 철망 및 뿜어 붙임 모르타르로 구성되어 있다. 유도배수시스템은 현장 적용성 및 시공성을 평가하기 위하여 재래식 콘크리트 라이닝 터널에서 시험 시공되었다. 재령 7일, 14일, 21일, 28일, 2개월, 3개월, 4개월, 5개월, 6개월, 7개월 및 8개월에 약 1,000 ml의 붉은색 물을 유도배수시스템 배면에 주입하여 유도배수시스템의 방수과 유도배수 성능을 평가하였다. 현장 성능 평가 실험이 진행된 8개월 동안 터널이 위치한 지역의 일일 평균 온도는 $-16.0~25.6^{\circ}C$로 측정되었고, 일일 최저 온도는 $-21.3^{\circ}C$, 일일 최고 온도는 $30.8^{\circ}C$였다. 유도배수시스템의 유도배수판에서는 누수가 발생하지 않았지만 재령 14일부터 유도배수관에서 누수가 발생하였다. 유도배수관 누수는 고압의 공압타카와 고정핀 사용으로 두께 0.2 cm인 연성플라스틱 재질의 유도배수관이 변형되었고, 누수 방지를 위한 Hotty-gel의 두께와 폭이 충분하지 않아서 발생한 것으로 판단된다.

• 한국간담췌외과학회지
• /
• 제27권3호
• /
• pp.313-316
• /
• 2023

Attenuated portal vein (PV) flow is challenging in pediatric liver transplantation (LT) because it is unsuitable for classic end-to-end jump graft reconstruction from a small superior mesenteric vein (SMV). We thus introduce a novel technique of an end-to-side jump graft from SMV during pediatric LT using an adult partial liver graft. We successfully performed two cases of end-to-side retropancreatic jump graft using an iliac vein graft for PV reconstruction. One patient was a 2-year-old boy with hepatoblastoma and a Yerdel grade 3 PV thrombosis who underwent split LT. Another patient was an 8-month-old girl who had biliary atresia and PV hypoplasia with stenosis on the confluence level of the SMV; she underwent retransplantation because of graft failure related to PV thrombosis. After native PV was resected at the SMV confluence level, an end-to-side reconstruction was done from the proximal SMV to an interposition iliac vein. The interposition vein graft through posterior to the pancreas was obliquely anastomosed to the graft PV. There was no PV related complication during the follow-up period. Using a jump vascular graft in an end-to-side manner to connect the small native SMV and the large graft PV is a feasible treatment option in pediatric recipients with inadequate portal flow due to thrombosis or hypoplasia of the PV.