• 구강회복응용과학지
• /
• 제33권2호
• /
• pp.127-134
• /
• 2017

전신적 혹은 국소적 원인에 의해 발생하는 치아맹출지연은 대부분 소아기에 발견되어 교정적 정출을 이용한 치료를 진행한다. 하지만 소아기때 치료를 받지 못하고 성인기로 될 경우, 교정에 의한 치아이동이 어려워지기 때문에 보철수복으로 치료를 변경할 수 있다. 보철계획을 결정하기 전 고려사항으로는 치아상실이 나타난 범위, 치아사이 근원심공간 및 악간공간, 환자의 연령대 등이 있다. 이 논문에서는 상하악 구치부 맹출지연환자를 지르코니아 부분 고정성 보철물을 통해 구강회복한 증례를 소개하고자 한다.

• 대한치과보철학회지
• /
• 제40권6호
• /
• pp.590-596
• /
• 2002

The resin : metal interface is at the basis of most bonding failures in resin-bonded prosthesis. Although debonding has been a problem with adhesive fixed partial dentures, various dentists classify them as long-term restorations. The advantages of resin-bonded fixed partial dentures include minimal tooth reduction and the possibility of rebonding. if resin-bonded protheses can be easily rebounded, it is of clinical importance to know if the lutingagents rebond as well the second time as they did originally. Several retentive systems for resin-to-metal bonding have recommended. Treatments such as electrolytic etching and silicone coating, despite the good result of bond strength, have proved to be time-consuming and technique-sensitive. Therefore a simple and more reliable method is desirable. This study evaluated the effect of metal surface treatments on the rebond strength of panavia 21 cement to a nickel-chromium(Ni-Cr) alloy. The samples were received the following surface treatments : Group No.1 (control or served as the control) treatment with sandblasting with 50um aluminum oxide and ultrasonically cleaned for 10minutes in double-deionized water, Group No.2 were no surface treatments. Group No.3 were treated with metal primer. Group No.4 were treated with sandblasting as previously described, and then metal priming. From the analysis of the results, the following conclusions were drawn. 1. Sandblasting and metal priming appears to be an effective method for treatment of metal after accidental debonding. 2. Group without surface treatment had significantly lower bond strengths compared with other groups. 3. The combination of sandblasting and metal priming may not develop superior bonding strengths compared with other techniques that used the Ni-Cr alloys. 4. Combination of cohesive and adhesive failures were the most common type observed. The results support the use of sandblasting as a viable procedure when rebonding accidentally lost adhesive partial denture. We concluded that sandblasting and metal priming of metal surface before bonding could provide the adequate bond strength during rebonding of resin-bonded fixed partial denture.

• 대한치과보철학회지
• /
• 제52권2호
• /
• pp.128-135
• /
• 2014

부분 무치악 환자는 고정성 보철, 가철성 국소의치, 임플란트 지지 고정성 보철로 수복될 수 있다. 그러나 소수 잔존치아만 남은 경우, 고정성 보철로는 수복이 어려우며, 국소의치 혹은 임플란트 지지 고정성 보철을 고려하게 된다. 이 경우 임플란트 지지 고정성 보철은 고정성 수복이라는 장점이 있으나, 충분한 개수의 임플란트가 식립되어야 하며, 환자의 전신적, 국소적 여건이 합당해야 하고, 경제적 부담도 크다. 가철성 국소의치는 지대치에 의한 대칭적인 지지가 중요하며, 특히 중심선에 대해 편측으로 소수 치아만 남은 경우에는 지점선에 대해 지대치에 유해한 스트레스를 가하면서 지대치의 예후가 불량해진다. 이 경우, 전략적 위치에 임플란트를 식립함으로써 임플란트를 의치의 유지 및 지지 요소로 활용하는 가철성보철물을 설계한다면 비용 대비 기능적이며 심미적인 보철 수복이 가능해진다. 본 두 증례는 상악 Kennedy Class I 부분 무치악 환자 중 편측으로 소수 잔존치가 전치에 국한하여 존재하는 경우로, 잔존치를 지대치로 사용하면서, 전략적 위치에 임플란트를 식립함으로써 의치의 지지가 향상된 국소의치를 제작한 증례이다.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.654-664
• /
• 2006

Statement of problem: There has been a eat interest in the use of titanium for fixed and removable prostheses in recent because of its excellent biocompatibility. However, the melting temperature and chemical reactivity of titanium necessities casting system different from those used in conventional casting. The current titanium casting systems are based on an electric-arc design for melting the metal in an argon atmosphere and its exclusive investment. Despite the new development in Ti casting system, inadequate mold filling and internal porosity are frequently observed casting defects. Purpose : The purposes of this study were to compare the castibility and reaction layer of the casting titanium under the two casting machines and their investment condition. Material and method: coping and machine-milled titanium coping according to the casting methods and the marginal configurations. The total 28 specimens were used, and these are divided into 4 groups according to 2 casting machines and 2 investments. The castings were analyzed using x-ray microanalysis and microhardness testing. The reaction layer between margin of titanium casting and the investments was observed and analyzed with scanning electron microscope. Result: 1. Castabiliy of casting titanium specimen was best in the group of centrifugal casting machine and Selevest $CB^{\circledR}$ and good that of Selevest CB and pressure differential casting machine, Rematitan plus and centrifugal casting machine, Rematitan plus and pressure differential casting machine in order. 2. There was no significanct correlation in titanium castability in respect of casting machine. However ANOVA indicated that Selevest $CB^{\circledR}$ groups had significantly better castability than Rematitan $plus^{\circledR}$ groups.(p<0.05) 3. There was a significant microhardness difference between centrifugal casting machine groups and pressure differential groups.(p<0.05) Titanium castings in centifugal groups had significantly harder than those in pressure differential groups. 4. The addition of zirconia decreased interfacial reactivity. Conclusion: above result revealed that of the castability of titanium casting specimens had little correlation in casting machines and was better in magnesia-based investment contained ZrO2 groups. However in order to practice casting titanium in clininic, its castability should be improved, also there should be more research on factor of castability so that long-span prothesis and removable partial denture metla frame may be casted completly.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.369-378
• /
• 2011

Purpose: This study was carried out for the purpose of obtaining basic data necessary for developing the future oral health promotion program of the elderly by surveying the actual condition of managing dental prosthesis in the elderly. Methods: It collected materials targeting 346 elderly brackets in over 65 years old who dwell in Seoul and Gyeonggi-do Province for about 10 months from September 2010 to June 2011, analyzed 312 copies except 34 copies, which are inappropriate for data processing due to being insufficient in response among these things, and obtained the following results. Results: In the actual condition of missing tooth, a case of missing tooth was indicated to be 78.8%. In case of missing tooth, the number of missing teeth was indicated to be 75.6% for under 5 pieces and 19.1% for over 21 pieces. In the actual condition of managing prosthesis, a case with dental prosthesis treatment was indicated to be 77.6%. A kind of prosthesis was indicated to be the highest in fixed partial dentures with 36.5%. In a method of rinsing dentures, 47.7% of the elderly responded as saying of washing it out with water. The appearance of removing dentures at night was indicated to be the highest in doing so with 63.1%. Satisfaction with prosthesis of being mounted now was indicated to be moderate with 50.4%. As for the appearance of having experience of education on how to manage prosthesis, it was indicated to be high with 50.4% in having none. In a kind of prosthesis depending on averagely monthly income, the ratio of total dentures was high when averagely monthly income is low. On the other hand, a case with high income was indicated to have high ratio in implants. The satisfaction with prosthesis was low when averagely monthly income is low. Also, in the experience of education on how to manage prosthesis, the ratio of responses as saying of having no experience of education on how to manage prosthesis was indicated to be high when averagely monthly income is low. Conclusion: Examining the above results, a developmental plan is considered to be necessary such as developing continuous and systematic oral health promotion program for managing elderly people's managing dental prothesis.