• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.496-504
• /
• 2015

Roadheader that excavates ground using pick cutters installed on the cutting head is one of the partial-face machines. A conical cutter among pick cutters is excavation tool decreasing the loss of cutter using tungsten carbide insert at the tip of the cutter and it has been widely used in the roadheaders. In this study, durability performance for three kinds of conical cutters was evaluated in copper mines composed of Manto and conglomerate. After field test, the visual inspection as well as the weight loss measurement of pick cutters was carried out to investigate the damage of pick cutters. In addition, CT scan and SEM were performed to check whether or not crack and apertures in pick cutters. As results, the conical cutter with hardfacing was evaluated as having the best durability performance and it was unable to find cracks in all cutters investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.253-258
• /
• 2012

The Cartesian grid system has generally been used in casting simulations, even though it does not represent sloped and curved surfaces very well. These distorted boundaries cause several problems, and special treatment is necessary to resolve them. A cut cell method on a Cartesian grid has been developed for the simulation of threedimensional mold filling. Cut cells at a cast/mold interface are generated on Cartesian grids, and the governing equations are computed using the volume and areas of the cast at the cut cells. In this paper, we propose a new method based on the partial cell treatment (PCT) that can consider the cutting cells which are cut by the cast and the mold. This method provides a better representation of the surface geometry, and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian gird system. Various test examples for several casting process are computed and validated.

• Analytical Science and Technology
• /
• v.33 no.2
• /
• pp.98-107
• /
• 2020

Methamphetamine (MA) is currently the most abused illicit drug in Korea. MA is produced by chemical synthesis, and the final target drug that is produced contains small amounts of the precursor chemicals, intermediates, and by-products. To identify and quantify these trace compounds in MA seizures, a practical and feasible approach for conducting chromatographic fingerprinting with a suite of traditional chemometric methods and recently introduced machine learning approaches was examined. This was achieved using gas chromatography (GC) coupled with a flame ionization detector (FID) and mass spectrometry (MS). Following appropriate examination of all the peaks in 71 samples, 166 impurities were selected as the characteristic components. Unsupervised (principal component analysis (PCA), hierarchical cluster analysis (HCA), and K-means clustering) and supervised (partial least squares-discriminant analysis (PLS-DA), orthogonal partial least squares-discriminant analysis (OPLS-DA), support vector machines (SVM), and deep neural network (DNN) with Keras) chemometric techniques were employed for classifying the 71 MA seizures. The results of the PCA, HCA, K-means clustering, PLS-DA, OPLS-DA, SVM, and DNN methods for quality evaluation were in good agreement. However, the tested MA seizures possessed distinct features, such as chirality, cutting agents, and boiling points. The study indicated that the established qualitative and semi-quantitative methods will be practical and useful analytical tools for characterizing trace compounds in illicit MA seizures. Moreover, they will provide a statistical basis for identifying the synthesis route, sources of supply, trafficking routes, and connections between seizures, which will support drug law enforcement agencies in their effort to eliminate organized MA crime.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• Geomechanics and Engineering
• /
• v.15 no.5
• /
• pp.1113-1124
• /
• 2018

Geological dynamic hazards during deep coal mining are caused by the failure of a composite system consisting of the rock and coal layers, whereas the joint in coal affects the stability of the composite system. In this paper, the compression test simulations for the rock-coal combined body with single joint in coal were conducted using $PFC^{2D}$ software and especially the effects of joint length and joint angle on strength and failure characteristics in a rock-coal combined body were analyzed. The joint length and joint angle exhibit a deterioration effect on the strength and affect the failure modes. The deterioration effect of joint length of L on the strength can be neglected with a tiny variation at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ between the loading direction and joint direction. While, the deterioration effect of L on strength are relatively large at ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$. And the peak stress and peak strain decrease with the increase of L. Additionally, the deterioration effect of ${\alpha}$ on the strength becomes larger with the increase of L. With the increase of ${\alpha}$, the peak stress and peak strain first decrease and then increase, presenting "V-shaped" curves. And the peak stress and peak strain at ${\alpha}$ of $45^{\circ}$ are the smallest. Moreover, the failure mainly occurs within the coal and no apparent failure is observed for rock. At ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$, the secondary shear cracks generated in or close to the joint tips, cause the structural instability failure of the combined body. Therefore, their failure models present as a shear failure along partial joint plane direction and partially cutting across the coal body or a shear failure along the joint plane direction. However, at ${\alpha}$ of $60^{\circ}$ and L of 10 mm, the "V-shaped" shear cracks cutting across the coal body cause its final failure. While crack nucleations at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ are randomly distributed in the coal, the failure mode shows a V-shaped shear failure cutting across the coal body.

• Journal of Chest Surgery
• /
• v.23 no.2
• /
• pp.231-235
• /
• 1990

Segmental resection or wedge resection of the lung and direct cutting across of bronchi frequently results in postoperative airleaks or bronchopleural fistula in some cases. Many methods have been devised to handle air leak problems by oversuturing the raw edges, the application of pleural onlay flaps, the use of cautery or tissue adhesives, but these still has not solved the problem of air leaking from raw surfaces of the lung with only partial successful we have tried the use of histoacryl to closure the raw surface of the resected lung and compared it’s results with of the closure with chromic catgut sutures in cats from May 1989 to Jan. 1990 at the department of the thoracic and cardiovascular surgery, Yonsei University, College of Medicine. Ninety lobe of the lungs were used in this study and forty nine of which have been divided segmentally and closed with histoacryl on the raw surfaces. Forty one of which have been divided segmentally and closed with sutures using chromic catgut for control. There were air leakages in twelve cases among 49 cases with applying histoacryl and airleak were in two cases among 12 cases with reapply histoacryl, But there were air leak in two cases among 41 cases with sutures using chromic catgut and airleak were in one case among with resutures using chromic catgut.

• Journal of Korea Foundry Society
• /
• v.29 no.1
• /
• pp.33-37
• /
• 2009

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the partial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian grid system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. By using the cut cell method, performance of computation gets better because of reducing the whole number of meshes.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.171-178
• /
• 2005

It is unavoidable to be formed slopes under special circumstance of Korea where 70% of the whole area are composed of mountains when civil engineering projects such as roads, site developments are increased with industrial development and horizontal expansions of urban area. Moreover, stability of the slopes become one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall are concentrated in summer season and the localized torrential downpour are getting more frequent recently. Resulting in these circumstances, partial slope failures by debris flow of the high water content soils are occurred frequently in cutting soil slopes. In this case of debris flow slope failure, slope declination method are selected for their stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. In this study, the results of the tests including a real construction history in a failed slope using developed method are described

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.115-120
• /
• 2006

In This Paper, We Propose The Method To Reconstruct And Estimate Partially Occluded Elliptical Objects In Images From Overlapping And Cutting. We Present The Robust Method For Recognizing Partially Occluded Objects Based On Symmetry Properties, Which Is Based On The Contours Of Elliptical Objects. A Proposed Method Provides Simple Techniques To Reconstruct Occluded Regions Via A Region Copy Using The Symmetry Axis Within An Object. Based On The Estimated Parameters For Partially Occluded Objects, We Perform Object Recognition On The Classifier. Since A Proposed Method Relies On Reconstruction Of The Object Based On The Symmetry Properties Rather Than Statistical Estimates, It Has Proven To Be Remarkably Robust In Recognizing Partially Occluded Objects In The Presence Of Scale Changes, Object Pose, And Rotated Objects With Occlusion, Even Though h Proposed Method Has Minor Limitations Of Object Poses.

• Journal of Veterinary Clinics
• /
• v.33 no.6
• /
• pp.376-380
• /
• 2016

A 12-year-old spayed, female Siberian Husky dog weighing 40 kg was referred for sudden collapse without a traumatic history. A splenic mass and hemoperitoneum were identified by ultrasonography and abdominocentesis at a local animal hospital. Emergency exploratory laparotomy was performed once the patient was stabilized. A splenic mass and engorged hepatic mass in the torsed left liver lobe were identified. Partial hepatic lobectomy of the left lateral lobe was performed using a laparoscopic linear self-cutting stapler and the spleen was also removed using an ultrasonic scalpel. Histopathologic examination revealed a diagnosis of splenic hemangiosarcoma with metastasis to the liver. Chemotherapy was not performed because the client did not give consent. The patient was checked regularly until death on POD 324. The metastatic nodules had spread to the lungs and other liver lobes and had gradually increased in size. Liver lobe torsion is a rare condition in dogs, especially accompanying neoplasia. This case supports a potential relationship between liver lobe torsion and neoplastic liver mass in dogs.