• Journal of Environmental Impact Assessment
• /
• v.30 no.2
• /
• pp.117-131
• /
• 2021

Urban development is continuously being carried out to stabilize housing supply. The importance of ecosystem services assessments considering the various urban spatial structures is emerging as land use change in the wake of urban development has impact on the provision of ecosystem services. However, few studies are available as to the effects of land use transition in agricultural land due to urban development on ecosystem services. The purpose of this study is to examine the applicability of decision-making in the urban planning process by analyzing the impact of land use change on ecosystem services due to urban development. Therefore, the scenario was set on before and after the city development, targeting Namyangju Wangsuk Zone 1 and InVEST model was used to compare and analyze changes in value of ecosystem services. Analysis results of ecosystem services before the urban development, it turned out that habitat quality and water yield increased overtime but carbon storage and crop production decreased. Analysis results of ecosystem services after the urban development indicated that all items in ecosystem services by scenario decreased more than in 2018. Among the scenarios of urban development, compact city had the lowest value of water resource supply but had the highest value in terms of habitat quality, carbon storage amount, and crop production. The study results demonstrate that the compact city has positive effects on ecosystem services and is expected to be used as the basic data for supporting policy decision-making in the establishment of future urban development and management plans.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.468-476
• /
• 2021

This study examined the effects of a hydrothermal pretreatment (HP) on the nutritional values and in vitro fermentation characteristics of tall fescue and corn silage. This study was conducted through a factorial design of 2 (control or HP) × 2 (hay; tall fescue or silage; corn). For the HP, forage was placed into a glass bottle with 20% w/v of water, and the glass bottle was sealed and heated to reach a temperature of 121℃ (0.12 MPa). The solid residue and liquid were collected and oven-dried at 65℃ for three days. The dried materials were tested for in vitro fermentation at 39℃ for 24 and 48 h. The content of ADF increased significantly regardless of the forage type. After in vitro incubation for 24 h, the total VFA content was significantly lower after HP, regardless of the forage type (p ≤ 0.05), and the propionate concentration was increased in corn silage with HP (p ≤ 0.05). After 48 hours of in vitro incubation, the propionate content increased significantly (p ≤ 0.03) in corn silage with HP (p ≤ 0.05), but the butyrate content decreased significantly (p ≤ 0.05). There was no change in the in vitro dry matter and neutral detergent fiber digestibility by HP regardless of the forage type. Therefore, the use of hydrothermally pretreated corn silage could be advantageous for the supply of energy for ruminants.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.61-77
• /
• 2011

This study focused on relevant rock names related to Sinsun(神仙) which had been settled as Taoist traces were combined with places. While interpreting major features of Sundoism relevant rocks, it also discussed types and places of rocks reflected in their names by considering distinct characteristics of landscape characters that ancestors viewed through the rocks or on the rocks. Conclusion of this study is summarized as follows. 1. Among the rock names related to Sinsun, the most frequently discovered one was Sinsunbawi(52) and followed by Sinsunbong(神仙峰: 38), Sinsundae(神仙臺: 31). Other than these, there were Gangsundae(降仙臺: 12), Sunyoodae (仙遊臺: 10) and Sasundae(四仙臺: 5). 2. In the name of Sinsundae, 'Dae(臺)' ascertains that it was located in greatly superb place in the aspects of viewpoint and appreciation where landscape superiority and overlook scenery were fair and outstanding. 3. Sinsunbong was named for a peak of mountain. At the same time, it implied a notion of worship with images of 'merging with sky' or 'looking up.' Most of time, Sinsunbong indicated the tallest rock in the mountain chain. 4. A significant number of Sinsunbong had names where legends of Sinsun's Go game or descent were originated from. It shows that 'Sinsun(仙) and Go game' used to be very important motives for folk etymology of Sinsun related rocks. Along with the Sinsundae, a number of Sinsunbawi were also turned out to exist in land and ocean with excellent marine view. 5. According to analysis of their altitudes and heights of the peaks where the rocks belong to, Sinsunbong, Sinsundae and Sinsunbawi were in order. It might indicate that the rocks were located on top of mountain or that Sinsunbong represented the mountain itself. Compared to this, Sinsundae was located in where distant panoramic views were overlooked. It was not necessarily to be in peak but in where with a great view like Taoist world. On the other hand, Sinsunbawi was located in where has fine scenery and great valley not so far from villages, which proved its name had been influenced by place feature not altitude. 6. Feature of rock with Sinsun related name is to comprise visual stability of worship object with close linkage to attitude of worshiper. Considering its deep connection with communicative method of worship object and worshiper, seemingly it was main factor to lead folk etymology of rocks with Sinsun related names. 7. Rock is an object with the greatest implication of Sinsun imagination and Sinsun rocks show most clearly the fact that Taoism, which used to be considered as inaccessible, had been actualized in a visual and realistic manner with the change of time.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.97
• /
• pp.55-68
• /
• 2020

The inscription found on buncheong ware (粉靑沙器, grayish-blue-powdered celadon) provides information on the bowl today, but in the past served as a device for controlling tributary payments (貢納) and the movement of government property (官物). The inscription had to be written or engraved clearly so that it could be recognizable to officials in charge of managing bowls. Such inscriptions offer important clues for contemporary research on buncheong ware. Buncheong Bowl with Stamped Design and Inscription of "Naeja" (內子) (bon 13808) in the collection of the National Museum of Korea bears a distinct inscription compared to other buncheong ware. Commonly, the inscription on buncheong indicated the name of the government office (官司名) to which the vessel belonged or the name of the place (地名) where the vessel was produced. However, the inscription "Naeja" on the buncheong bowl at the National Museum of Korea has no corresponding government office. "Naeja" is in fact a misspelling of Naeja (內資), meaning this bowl belonged to the Naejasi (內資寺, Royal Bureau of Procurement). Although "Naeja" (內子) was a misspelling of the intended Naeja (內資), it was still understood as a reference to the Naejasi since they were homophonic. Recently, buncheong ware with misspelled yet homophonous inscriptions have begun to be excavated in downtown Seoul. Examples including "Naeja" (內子) instead of Naeja (內資) and "Insu" (仁守) instead of Insu (仁壽) have been unearthed from historical sites in Seoul that functioned as consumption sites, meaning they were in fact circulated as government property despite the misspellings (whether accidental or the outcome of ignorance). Such misspelled yet homophonous inscriptions are characterized by the use of simple characters and a few sloppy strokes. Like other buncheong ware bearing the inscriptions of government office names, the bowls with the inscriptions of "Naeja" (內子) and "Insu" (仁守) were discovered at historical sites in Seoul. These misspelled homophonous inscriptions reveal that errors occurred during the process of engraving inscriptions on buncheong ware produced as a tributary payment during the early Joseon Dynasty and that buncheong ware with such errors were still distributed.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.14 no.6
• /
• pp.30-43
• /
• 2018

Many studies have been carried out to retrieve images using colors, shapes, and textures which are characteristic of images. In addition, there is also progress in research related to the disease images of the crop. In this paper, to be a help to identify the disease occurred in crops grown in the agricultural field, we propose a similarity-based crop disease search system using the diseases image of horticulture crops. The proposed system improves the similarity retrieval performance compared to existing ones through the combination descriptor without using a single descriptor and applied the weight based calculation method to provide users with highly readable similarity search results. In this paper, a total of 13 Descriptors were used in combination. We used to retrieval of disease of six crops using a combination Descriptor, and a combination Descriptor with the highest average accuracy for each crop was selected as a combination Descriptor for the crop. The retrieved result were expressed as a percentage using the calculation method based on the ratio of disease names, and calculation method based on the weight. The calculation method based on the ratio of disease name has a problem in that number of images used in the query image and similarity search was output in a first order. To solve this problem, we used a calculation method based on weight. We applied the test image of each disease name to each of the two calculation methods to measure the classification performance of the retrieval results. We compared averages of retrieval performance for two calculation method for each crop. In cases of red pepper and apple, the performance of the calculation method based on the ratio of disease names was about 11.89% on average higher than that of the calculation method based on weight, respectively. In cases of chrysanthemum, strawberry, pear, and grape, the performance of the calculation method based on the weight was about 20.34% on average higher than that of the calculation method based on the ratio of disease names, respectively. In addition, the system proposed in this paper, UI/UX was configured conveniently via the feedback of actual users. Each system screen has a title and a description of the screen at the top, and was configured to display a user to conveniently view the information on the disease. The information of the disease searched based on the calculation method proposed above displays images and disease names of similar diseases. The system's environment is implemented for use with a web browser based on a pc environment and a web browser based on a mobile device environment.

• Journal of Christian Education in Korea
• /
• v.64
• /
• pp.203-235
• /
• 2020

The purpose of this study is to identify the degree of social presence perceived by students and to explore the factors that have affected it after practicing Christian Education classes as synchronous distance course due to Covid-19. It is also to suggest effective ways in the aspects of the design and operation to improve social presence. In order to measure social presence and derive influencing factors, research related to synchronous distance class and social presence is summarized through literature review. The researchers also surveyed 58 students in three courses of Christian education major at a University in Gyeonggi-do and conducted in-depth interviews with 6 students. The main findings are as follows: First, the sense of social presence was moderate, the emotional bond was the lowest by sub-factor, the open communication, the sense of community was moderate, and the mutual support and concentration were the highest. Second, factors that had a positive impact on the sense of social reality were group activities, selfintroduction activities, active participation in classes, mutual communication such as Q & A or response to peer learners' opinions during lectures by professors, questions, feedback, etc, and having a smaller number of students. Factors that had a negative impact on the perception of social presence were lack of private conversations, poor participation in classes, lack of communication with each other, and difficulty concentrating. The causes of these negative factors were technical problems and limitations arising from zoom, inconvenience and distracting surroundings, lack of time, and psychological awkwardness. Reflecting the results of the study, orientation to effective synchronous distance course, guidance on smooth communication methods, strengthening the role of professors to promote learning, strengthening group activities and learner-centered activities, and proposing a smaller scale of students were ways that are offered to improve the sense of social presence in synchronous distance courses.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.151-176
• /
• 2021

As the information technology industry develops, various kinds of data are being created, and it is now essential to process them and use them in the industry. Analyzing and utilizing various digital data collected online and offline is a necessary process to provide an appropriate experience for customers in the industry. In order to create new businesses, products, and services, it is essential to use customer data collected in various ways to deeply understand potential customers' needs and analyze behavior patterns to capture hidden signals of desire. However, it is true that research using data analysis and UX methodology, which should be conducted in parallel for effective service development, is being conducted separately and that there is a lack of examples of use in the industry. In thiswork, we construct a single process by applying data analysis methods and UX methodologies. This study is important in that it is highly likely to be used because it applies methodologies that are actively used in practice. We conducted a survey on the topic to identify and cluster the associations between factors to establish customer classification and target customers. The research methods are as follows. First, we first conduct a factor, regression analysis to determine the association between factors in the happiness data survey. Groups are grouped according to the survey results and identify the relationship between 34 questions of psychological stability, family life, relational satisfaction, health, economic satisfaction, work satisfaction, daily life satisfaction, and residential environment satisfaction. Second, we classify clusters based on factors affecting happiness and extract the optimal number of clusters. Based on the results, we cross-analyzed the characteristics of each cluster. Third, forservice definition, analysis was conducted by correlating with keywords related to happiness. We leverage keyword analysis of the thumb trend to derive ideas based on the interest and associations of the keyword. We also collected approximately 11,000 news articles based on the top three keywords that are highly related to happiness, then derived issues between keywords through text mining analysis in SAS, and utilized them in defining services after ideas were conceived. Fourth, based on the characteristics identified through data analysis, we selected segmentation and targetingappropriate for service discovery. To this end, the characteristics of the factors were grouped and selected into four groups, and the profile was drawn up and the main target customers were selected. Fifth, based on the characteristics of the main target customers, interviewers were selected and the In-depthinterviews were conducted to discover the causes of happiness, causes of unhappiness, and needs for services. Sixth, we derive customer behavior patterns based on segment results and detailed interviews, and specify the objectives associated with the characteristics. Seventh, a typical persona using qualitative surveys and a persona using data were produced to analyze each characteristic and pros and cons by comparing the two personas. Existing market segmentation classifies customers based on purchasing factors, and UX methodology measures users' behavior variables to establish criteria and redefine users' classification. Utilizing these segment classification methods, applying the process of producinguser classification and persona in UX methodology will be able to utilize them as more accurate customer classification schemes. The significance of this study is summarized in two ways: First, the idea of using data to create a variety of services was linked to the UX methodology used to plan IT services by applying it in the hot topic era. Second, we further enhance user classification by applying segment analysis methods that are not currently used well in UX methodologies. To provide a consistent experience in creating a single service, from large to small, it is necessary to define customers with common goals. To this end, it is necessary to derive persona and persuade various stakeholders. Under these circumstances, designing a consistent experience from beginning to end, through fast and concrete user descriptions, would be a very effective way to produce a successful service.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.86-92
• /
• 2022

Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.

• 한국노년학
• /
• v.40 no.4
• /
• pp.639-657
• /
• 2020

The purpose of this study is to analyze the effect of individual differences in recognition of retirement responsibility on financial preparedness for retirement and to examine moderating effect of income-level on the relationships between the two variables, using the 7th Korean Retirement and Income Study(KReIS). Two research methods, descriptive analysis and hierarchical multiple logistic regression(HMLR) analysis, have been conducted. The total number of sample was 3,869 subjects with an average age of 58.9 years and 55.3% males. The results show that only 35.8% of the respondents make financial plans for retirement, and 64.2% did not. Main findings are as follows. First, 65% of respondents take a responsibility for financial preparedness for retirement, compared to 37% in European countries. Second, people with responsibility for their own retirement are more likely to have a financial preparation for retirement than people who think others(family, society, government) have to take a responsibility for retirement instead of them. Third, there is a significant moderating effect of income-level on relationships between recognition of retirement responsibility and financial preparedness for retirement. As income level decreases, the moderating effect reduces the positive effect of recognition of retirement responsibility on financial preparedness for retirement and vice versa. Fourth, as income level increases and educational level is higher, the tendency to prepare financially for retirement is also increasing. Low-income and low-educated people are less likely to have a financial preparation for retirement than their counterparts. The findings suggest that it is necessary to design an effective incentive scheme for financial preparedness for retirement for low-income and low-educated people and to develop various policies and services to encourage them to prepare financially for retirement.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.