• 제목/요약/키워드: parasitic coupling ratio

검색결과 5건 처리시간 0.019초

On the Necessity of Cavity-type Coupling Mechanism for obtaining Circular Polarization with Microstrip Patch Antenna

  • Abegaonkar, Mahesh P.;Cho, Young-Ki
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.459-463
    • /
    • 2003
  • A circularly polarized microstrip patch antenna (MPA) using electromagnetic (EM) coupled fed method is analyzed in view of the two types of coupling mechanisms viz. cavity and parasitic type, proposed earlier. The patch-ground plane distance is varied in order to achieve the fore-mentioned types of couplings. For each case of patch-ground plane distance, the offset position of feedline is optimized for perfect matching and the boresight axial ratio (AR) is observed. It is seen that CP operation is possible only for cavity-type coupling (smaller patch-ground plane distances). The simulated results for the boresight AR for the two types of coupling mechanisms are presented.

  • PDF

방사개구면에 역 L형 기생소자를 세운 GPS용 이중대역 마이크로스트립 안테나 설계 (A Design of Dual-band Microstrip Antenna Loading Inverted-L-shaped Parasitic Elements Vertically at Radiation Apertures for GPS Applications)

  • 최윤선;우종명
    • 한국ITS학회 논문지
    • /
    • 제14권5호
    • /
    • pp.38-43
    • /
    • 2015
  • 본 논문에서는 마이크로스트립 패치 안테나의 방사개구면에 역 L형 기생소자를 수직으로 세운 이중대역 마이크로스트립 안테나를 설계 및 제작하였다. 제안된 안테나는 GPS $L_1(1.575 GHz)$$L_2(1.227 GHz)$ 대역을 수용하도록 설계하였다. 먼저, GPS $L_1$ 대역은 반파장 마이크로스트립 패치 안테나를 이용하여 수용하였고, 섭동법을 이용하기 위해 방사개구면에 수직으로 세워 역 L형 기생소자를 패치안테나와 커플링시켜 공진시킴으로써 GPS $L_2$ 대역을 수용하였다. 다음으로 두 대역에서 모두 원형편파를 발생시키기 위해서 급전점 반대편 방사개구면에 각각의 편파에 해당하는 방사개구면에 역 L형 기생소자를 각각 세웠고, 패치 안테나의 급전점을 대각선으로 옮겨 이중대역 원형편파 마이크로스트립 안테나를 설계하였다. 이렇게 설계된 원형편파 안테나의 크기는 $88.5{\times}79{\times}10.4mm^3$ ($0.36{\lambda}_L{\times}0.32{\lambda}_L{\times}0.04{\lambda}_L$, ${\lambda}_L$은 1.227 GHz의 공기 중 파장)의 크기를 가지며, 단층으로 저자세를 유지한다. -10 dB 대역폭은 GPS $L_1$대역에서 116.3 MHz(7.4%), GPS $L_2$대역 64.3 MHz(5.2%)로 측정되어 GPS $L_1$$L_2$ 대역의 요구대역폭(각각 24 MHz)을 만족하였다. 3 dB 축비 대역폭은 11.7 MHz(0.74%)와 14 MHz(1.14%)로 각각 측정되었으며, 방사패턴은 두 대역에서 모두 브로드 사이드 방사패턴을 형성하였다.

Comparative Study on the Structural Dependence of Logic Gate Delays in Double-Gate and Triple-Gate FinFETs

  • Kim, Kwan-Young;Jang, Jae-Man;Yun, Dae-Youn;Kim, Dong-Myong;Kim, Dae-Hwan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제10권2호
    • /
    • pp.134-142
    • /
    • 2010
  • A comparative study on the trade-off between the drive current and the total gate capacitance in double-gate (DG) and triple-gate (TG) FinFETs is performed by using 3-D device simulation. As the first result, we found that the optimum ratio of the hardmask oxide thickness ($T_{mask}$) to the sidewall oxide thickness ($T_{ox}$) is $T_{mask}/T_{ox}$=10/2 nm for the minimum logic delay ($\tau$) while $T_{mask}/T_{ox}$=5/1~2 nm for the maximum intrinsic gate capacitance coupling ratio (ICR) with the fixed channel length ($L_G$) and the fin width ($W_{fin}$) under the short channel effect criterion. It means that the TG FinFET is not under the optimal condition in terms of the circuit performance. Second, under optimized $T_{mask}/T_{ox}$, the propagation delay ($\tau$) decreases with the increasing fin height $H_{fin}$. It means that the FinFET-based logic circuit operation goes into the drive current-dominant regime rather than the input gate load capacitance-dominant regime as $H_{fin}$ increases. In the end, the sensitivity of $\Delta\tau/{\Delta}H_{fin}$ or ${{\Delta}I_{ON}}'/{\Delta}H_{fin}$ decreases as $L_G/W_{fin}$ is scaled-down. However, $W_{fin}$ should be carefully designed especially in circuits that are strongly influenced by the self-capacitance or a physical layout because the scaling of $W_{fin}$ is followed by the increase of the self-capacitance portion in the total load capacitance.

A Study on Improved Isolation of Indoor Repeating Antenna using Metamaterial Absorber for WCDMA System

  • Kim, Hyoungjun;Moon, Yong;Seo, Chulhun
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권4호
    • /
    • pp.850-855
    • /
    • 2013
  • This paper proposes a novel design for a compact, high-isolation WCDMA indoor repeater antenna. The proposed antenna consists of a patch antenna and metamaterial absorber. The required WCDMA bandwidth is obtained by utilizing the coupling between the main and the parasitic patches. In addition, high isolation is achieved using the metamaterial absorber, which has an absorption of about 98% at 2.1 GHz. Overall, the proposed antenna has a gain of over 7 dBi, a Voltage Standing Wave Ratio (VSWR) of less than 2, more than 85 dB of isolation between the service and donor antennas over the WCDMA band and a total volume of the proposed antenna only $70mm{\times}70mm{\times}43.8mm$.

5'' True Color FED 구동시스템 설계 (Design of 5'' True Color FED Driving System)

  • 신홍재;권오경;곽계달
    • 전자공학회논문지SC
    • /
    • 제38권5호
    • /
    • pp.70-78
    • /
    • 2001
  • 본 연구에서는 전류제어 효과를 갖는 전압제어 펄스폭 변조 방식의 5' true color FED 구동시스템을 설계하였다. 제안한 구동방식은 전압제어 펄스폭 변조방식과 전류제어 방식의 장점을 가지고 있다. 또한, FED 구동회로의 시뮬레이션을 위하여 FED 서브 픽셀에 대한 새로운 회로 모델을 제안한다. 제안된 모델은 FED 서브 픽셀의 특성과 FED 패널의 기생 효과인 게이트 라인간 커플링 현상과 인접한 캐소드 라인을 통하여 흐르는 누설 전류 등을 고려하고 있다. FED 구동회로의 출력단은 제안된 모델을 사용하여 최적화되었다. R.G.B 입력데이터 신호 처리를 병렬처리 방식으로 하여 기존의 직렬처리 방식에 비해서 화면에 영상을 디스플레이하는 duty ratio를 최대로 하여 휘도를 높일 수 있도록 하였다. 이러한 연구 결과를 바탕으로 $300{\times}224$의 해상도를 가지는 5' true color FED를 성공적으로 디스플레이 하였다.

  • PDF