• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.276-285
• /
• 2007

In this paper it was discussed and compared measured loudspeaker impedance curve with ones reconstructed by TS parameters estimated using four kinds of parameter estimation methods developed in frequency domain. Frequency dependent parameters were introduced and derived using least square error minimization technique. For known dynamic mass TS parameter estimation methods were reviewed and also proved non-uniqueness of these parameters by simulation method. Minimum phase transformation was adopted to derive phase information from magnitude of loudspeaker electrical impedance curve measured by one channel analyzer.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.1
• /
• pp.255-261
• /
• 2014

Many studies have estimated a mixture of binomial distributions. This paper considers an extension, a mixture of shifted binomial distributions, and the estimation of the distribution. The range of each component binomial distribution is rst evaluated and then for each possible value of shifted parameters, the EM algorithm is employed to estimate those parameters. From a set of possible value of shifted parameters and corresponding estimated parameters of the distribution, the likelihood of given data is determined. The simulation results verify the performance of the proposed method.

• Journal of Korean Society for Quality Management
• /
• v.15 no.1
• /
• pp.20-32
• /
• 1987

Estimation for the parameters of a bivariate exponential (BVE) model of Marshall and Olkin (1967) is investigated for the cases of complete sampling and time-truncated parallel sampling. Maximum likelihood estimators, method of moment estimators and Bayes estimators for the parameters of a BVE model are obtained and compared with each other. A Monte Cario simulation study for a moderate sized samples indicates that the Bayes estimators of parameters perform better than their maximum likelihood and method of moment estimators.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.4
• /
• pp.256-262
• /
• 2016

The Weibull is widely used in reliability analysis, and several studies have attempted to improve estimation of the distribution's parameters. least squares estimation (LSE) or Maximum likelihood estimation (MLE) are often used to estimate distribution parameters. However, it has been proven that Bayesian methods are more suitable for small sample sizes than LSE and MLE. In this work, the Weibull parameter estimation accuracy of LSE, MLE, and Bayesian method are compared for sample sets with 3 to 30 data points. The Bayesian method was most accurate for sample sizes under 25, and the accuracy of the Bayesian method was similar to LSE and MLE as the sample size increased.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.535-544
• /
• 2024

In the rapidly advancing landscape of computer vision (CV) technology, there is a burgeoning interest in its integration with the construction industry. Camera calibration is the process of deriving intrinsic and extrinsic parameters that affect when the coordinates of the 3D real world are projected onto the 2D plane, where the intrinsic parameters are internal factors of the camera, and extrinsic parameters are external factors such as the position and rotation of the camera. Camera pose estimation or extrinsic calibration, which estimates extrinsic parameters, is essential information for CV application at construction since it can be used for indoor navigation of construction robots and field monitoring by restoring depth information. Traditionally, camera pose estimation methods for cameras relied on target objects such as markers or patterns. However, these methods, which are marker- or pattern-based, are often time-consuming due to the requirement of installing a target object for estimation. As a solution to this challenge, this study introduces a novel framework that facilitates camera pose estimation using standardized materials found commonly in construction sites, such as concrete forms. The proposed framework obtains 3D real-world coordinates by referring to construction materials with certain specifications, extracts the 2D coordinates of the corresponding image plane through keypoint detection, and derives the camera's coordinate through the perspective-n-point (PnP) method which derives the extrinsic parameters by matching 3D and 2D coordinate pairs. This framework presents a substantial advancement as it streamlines the extrinsic calibration process, thereby potentially enhancing the efficiency of CV technology application and data collection at construction sites. This approach holds promise for expediting and optimizing various construction-related tasks by automating and simplifying the calibration procedure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.243-248
• /
• 2010

This study addresses spacecraft moment of inertial estimation approach using Modified Rodrigues Parameters(MRP). The MRP offer advantage by avoiding singularity in Kalman Filter design for attitude determination caused by the norm constraint of quaternion parameters. Meanwhile, MRP may suffer singularity for large angular displacement, so that we designed appropriate reference attitude motion for accurate estimation. The proposed approach is expected to provide stable error covariance update with accurate spacecraft mass property estimation results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.63-74
• /
• 1996

Automatic transmission for heavy duty vehicles is a part of the power pack which includes steering and braking systems. This transmission in different from the one for passenger car. Therefore, in order to understand the trend of the important design parameters, maneuverability, acceleration performance and maximum speed, we need to analyze the total performance characteristics of the power transmission systems. In this study, modeling of the automatic transmission in heavy duty vehicle is carried out and the performance analysis method is presented. Results can be used for performance estimation data in the analysis for several combination method which determines the optimal parameters on the basis of penalty functions and weightings. And the estimation method of the important performance parameters such as engine inertia or power loss of engine by experiments is presented.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.5
• /
• pp.481-486
• /
• 2002

In this paper, a new on-line parameter estimation methodology for the general continuous time Takagi-Sugeno(T-5) fuzzy model whose parameters are poorly known or uncertain is presented. An estimator with an appropriate adaptive law for updating the parameters is designed and analyzed based on the Lyapunov theory. The adaptive law is designed so that the estimation model follows the plant parameterized model. By the proposed estimator, the parameters of the T-S fuzzy model can be estimated by observing the behavior of the system and it can be a basis for the indirect adaptive fuzzy control. Based on the derived design method, the parameter estimation for controllable canonical T-S fuzzy model is also Presented.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.61-63
• /
• 1994

Accurate estimation of soil resistivity parameters are very important in the design of grounding systems. This paper presents a useful methodology for the optimal estimation of soil parameters based on the weighted least square concepts using a set of earth resistivity measurements by Wenner method. And, this paper developes a computer simulation programming for the estimation of soil parameters. Results are presented and compared with the results of other methods.

• Journal of applied mathematics & informatics
• /
• v.41 no.2
• /
• pp.449-468
• /
• 2023

This paper deals in the study of the estimation of the parameters of Erlang distribution based on rank set sampling and some of its modifications. Here we considered Maximum Likelihood (ML) and the Bayesian technique to estimate the shape and scale parameter of Erlang distribution based on RSS and its some modifications such as ERSS, MRSS, and MRSSu. The derivation for unknown parameters of Erlang distribution is well presented using normal approximation to the asymptotic distribution of ML estimators. But due to the complexity involves in the integral, the Bayes estimator of unknown parameters is obtained using MCMC method. Further, we compared the MSE of estimation in different sampling schemes with different set sizes and cycle size. A real-life data application is also given to illustrate the efficiency of the proposed scheme.