• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.303-313
• /
• 2010

This paper describes an acoustic communication receiver structure, which is designed for QPSK (Quadrature Phase Shift Keying) signal with 25 kHz carrier frequency and 5 kHz symbol rate, and takes samples from received signal at 100 kHz sampling rate. Based on the described receiver structure, optimum design parameters, such as number of taps of FF (Feed-Forward) and FB (Feed-Back) filters and forgetting factor of RLS (Recursive Least-Square) algorithm, of joint equalizer are determined to minimize the BER (Bit Error Rate) performance of the joint equalizer output symbols when the acquisition data in shallow water using implemented acoustic transducers is decimated at a rate of 2:1 and then enforced to the input of receiver. The transmission distances are 1.4 km, 2.9 km, and 4.7 km. Analysis results show that the optimum number of taps of FF and FB filters are different according to the distance between source and destination, but the optimum or near optimum value of forgetting factor is 0.997. Therefore, we can reach a conclusion that the proper receiver structure could change the number of taps of FF and FB filters with the fixed forgetting factor 0.997 according to the transmission distance. Another analysis result is that there are an acceptable performance degradation when the 16-tap-length simple filter is used as a low-pass filter of receiver instead of 161-tap-length matched filter.

• Geotechnical Engineering
• /
• v.12 no.4
• /
• pp.131-144
• /
• 1996

In order to accelerate the rate of consolidation settlement and to gain a required shear strength for a given soft clay deposit, the preloadina technique combined with a vertical drainage system has been widely applied. Even if a sophisticated numerical analysis technique is applied to solve the consolidation behavior of drainage-installed soft deposits, the actual field behavior is often different from the behavior predicted in the design state due to several uncertainties involved in soil properties, numerical modelling, and measuring system. In this paper, two back-analysis schemes such hs simplex and BFGS methods have been implemented in an a Bisymmetric consolidation program, AXICON which considers the variation of compressibility and permeability during the consolidation process. Utilizing the program, one might be able to appropriately predict the subsequent consolidation behavior from the measured data in an early stage of consolidation of drainage-installed soft deposits.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.11
• /
• pp.1630-1636
• /
• 2013

An investigation was carried out to assess the carcass characteristics and meat quality aspects of immunocastrated male pigs of medium genetic potential for lean meat deposition in carcass (53 to 55%). When the crossbred Large White x Landrace pigs (n = 45) were 70 days old, they were distributed in a totally randomized design in three treatments (castrated males, females and immunocastrated males) with three replicates of five animals. The pigs were slaughtered when they were 140 days old. Carcass temperature and pH were recorded twice, at 45 min and 24 h after slaughter. The carcasses were evaluated for hot and cold carcass yield, commercial cuts yield, length and depth, back fat thickness, loin eye area and lean meat percentage. The Longissimus dorsi muscle was extracted for analysis of color ($L^*$, $a^*$, $b^*$), exudate loss, cooking loss and centesimal and sensorial analysis of the meat. There were no significant differences for the evaluated parameters between castrated males, immunocastrated males and females, except for backfat thickness between the 7th and 8th thoracic vertebra and the point P2 (lower for immunocastrated males) and carcass temperature at 45 min post slaughter (higher in immunocastrated males), however, this did not interfer with the rate of pH decrease post mortem and the meat quality. The results from this research did not indicate a benefit of immunocastration on carcass characteristics of pigs of medium genetic potential for lean meat deposition in carcass, when compared to surgical castration.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.6
• /
• pp.610-614
• /
• 2016

Objective : The purpose of this study was to present the outcome of the microsurgical foraminotomy via Wiltse paraspinal approach for foraminal or extraforaminal (FEF) stenosis at L5-S1 level. We investigated risk factors associated with poor outcome of microsurgical foraminotomy at L5-S1 level. Methods : We analyzed 21 patients who underwent the microsurgical foraminotomy for FEF stenosis at L5-S1 level. To investigate risk factors associated with poor outcome, patients were classified into two groups (success and failure in foraminotomy). Clinical outcomes were assessed by the visual analogue scale (VAS) scores of back and leg pain and Oswestry disability index (ODI). Radiographic parameters including existence of spondylolisthesis, existence and degree of coronal wedging, disc height, foramen height, segmental lordotic angle (SLA) on neutral and dynamic view, segmental range of motion, and global lumbar lordotic angle were investigated. Results : Postoperative VAS score and ODI improved after foraminotomy. However, there were 7 patients (33%) who had persistent or recurrent leg pain. SLA on neutral and extension radiographic films were significantly associated with the failure in foraminotomy (p<0.05). Receiver-operating characteristics curve analysis revealed the optimal cut-off values of SLA on neutral and extension radiographic films for predicting failure in foraminotomy were $17.3^{\circ}$ and $24^{\circ}s$, respectively. Conclusion : Microsurgical foraminotomy for FEF stenosis at L5-S1 level can provide good clinical outcomes in selected patients. Poor outcomes were associated with large SLA on preoperative neutral (>$17.3^{\circ}$) and extension radiographic films (>$24^{\circ}$).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.2
• /
• pp.64-74
• /
• 2004

In order to accelerate the rate of consolidation settlement, to reduce settlement, and to increase bearing capacity for soft ground under quay wall, sand compaction pile method (SCP) has widely been applied. Improved ground is composite ground which is consisted of the sand pile-surrounding clayey soil. As caisson and upper structures are installed on SCP composite ground, the settlement is compositively occurred by elastic compression of sand compaction piles and also consolidation of the surrounding clay ground. In this study, the combined settlement model is proposed to predict the settlement of SCP composite ground in basis of elastic theory for sand compaction pile and consolidation theory for marine soft clay. Optimization technique was performed based on back-analysis so that real coded genetic algorithm was applied to estimate the parameters of the proposed settlement model. Case analysis was carried out for a domestic SCP composite ground to examine the applicability of the proposed prediction technique.

• Nuclear Engineering and Technology
• /
• v.19 no.1
• /
• pp.34-41
• /
• 1987

This work concerns with a comparison of the 1-dimensional (or 1-D) load follow analysis method with reference to the detailed 3-dimensional (or 3-D) computations. For this purpose a 1-D two-group finite difference code, HLOFO, and a 3-D coarse-mesh code based on the modified Borresen's method, CMSNAC, are developed. The CMSNAC code is used to obtain the 3-D power peaks and reactivity parameters in response to power swing from 100 to 50 and back to 100% in the 12-3-6-3 load cycle for the BOL of the KORI Unit 1 PWR core. The 3-D result is then compared with the 1-D HLOFO computations, the cross section and buckling inputs of which are obtained by combining the flux-volume weighting scheme with the approximate flux from the auxiliary 3-D computations. It is shown that the 1-D computation has a limited accuracy, yet it is confirmed that it can describe the core axial average behavior which is fairly consistent with the detailed 3-D computation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.513-514
• /
• 2006

Recently intradiscal electrothermal therapy is introduced, which is a new and minimally invasive technique fer the treatment of discogenic low back pain. This procedure involves the percutaneous threading of a flexible catheter into the disc under fluoroscopic guidance. The catheter, composed of thermal resistive coil, heats the posterior annulus of the disc, causing contraction of collagen fibers and destruction of afferent nociceptors. This study tries to investigate the effects of the important factors of this procedure such as heat source temperature and heat applying time on the temperature distribution within the intervertebral disc. This study utilized both computer simulation and the experiment for the verification of finite element analysis. FE analysis was carried out with ANSYS v7.0 (ANSYS Inc, USA) using 10,980 number of brick element and 12,551 number of node. The functional spinal units of 5 month old swine were used for the experiment and the temperature was monitored using 10 channel temperature measurement device MV200. Through this study, it was able to analyze the temperature range of inner intervertebral disc by two mechanisms which are known to alleviate pain clinically. The results showed that when the heat source temperature was kept up 80 degree for 1,020 seconds, the temperature of inner annulus reached at 45 degree up to the distance of 15.6mm from heat source, which explains coagulation of inner annulus by heat. When the same heat source was used, the temperature of inner nucleus reached at 60 degree up to the distance of 9mm from heat source, which explains contraction of inner nucleus by heat.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.133-142
• /
• 2008

AGV systems are widely used to increase the flexibility and the efficiency of the material handling systems. AGV systems are one of critical factors which determine the overall performance of the manufacturing systems. To this end, the optimal design for AGV systems is essential. Commercial simulation software is often used as an analysis tool during the design of AGV systems, however a series of procedures are desirable to simplify the analysis processes. In this paper, we present and develop the architecture for unidirectional AGV systems simulator which is able to consider approximate optimal unidirectional flow path and various operational parameters. The designed AGV systems simulator is based on JAVA, and it is developed to support designing approximate optimal unidirectional network by using Tabu search method. In addition, it enables users to design and evaluate AGV systems and to analyze alternative solutions easily. Simulation engine is consists of layout designer, AGV operation plan designer, and integrated AGVS layout designer. Users enter their system design/operation information into input window, then the entered information is automatically utilized for modeling and simulating AGV systems in simulation engine. By this series of procedures, users can get the feed back quickly.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.4
• /
• pp.319-327
• /
• 2000

In this study, the hydraulic characteristics variation of flood level caused by tree-planting condition in channel section is evaluated through the examination and analysis of back water characteristics in a natural channel within urban area where the improvement is completed. The study channel is Sinchun runs through the center of Taegu metropolitan city. For the analysis, the comparative examination of runoff characteristics depend on tree- planting condition performed for the flood level of the most upstream point, and velocity of study channel when the project flood flows according to three cases that existing channel is improved to the pro-natural channel, the roughness condition of both riverside highlands is changed, and the composition rate of trees in the riverside highlands is changed. It is known that the variation ranges of the flood level increase remarkably in general, and of the velocity decrease from the result of the examination for the hydraulic characteristics parameters at the most upstream point depend on the tree-planting condition of the channel section when the project flood flows. From the results of the above study on the variation of the hydraulic characteristics according to the tree-planting condition in channel section, it is known that the hydraulic characteristics when the project flood flows in channel have close relationship with the section properties and the slope of channel.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.339-345
• /
• 2013

The objective of this study was to establish genetic evaluation systems with carcass data collected by 68 individual farms from 2007 to 2011 in Pyeongchang area of Kangwon province. All the possible of environment effects were corrected by analysis of variance (ANOVA) to estimate more accurate genetic parameters. Heritabilities and genetic correlations were estimated from carcass data collected from Hanwoo steers(n=10,441) born in Pyeongchang region from 2005 to 2008. Traits evaluated included carcass weight (CWT), eye muscle area (EMA), back fat thickness (BF) and marbling score (MS). As for the mean value and standard deviation for carcass traits, CWT, EMA, BF and MS were 424.5, 92, 13.7 and 5.7. Parameters were estimated using a multiple trait animal model and derivative-free restricted maximum likelihood procedures. Estimated heritabilities for CWT, EMA, BF and MS were 0.30, 0.21, 0.42 and 0.42, respectively. Genetic correlation of CWT with EMA, BF and MS were estimated to 0.24, 0.36 and 0.07, respectively. Genetic correlation of EMA with BF and MS was -0.27 and 0.61, respectively.