• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.54-61
• /
• 2000

In order to determine the mode I stress intensity factor ($K_I$) by means of the alternating current potential drop(ACPD) technique, the change in potential drop due to load for a paramagnetic material containing a two-dimensional surface crack was examined. The cause of the change in potential drop and the effects of the magnetic flux and the demagnetization on the change in potential drop were clarified by using the measuring systems with and without removing the magnetic flux from the circumference of the specimen. The change in potential drop was linearly decreased with increasing the tensile load and was caused by the change in conductivity near the crack tip. The reason of decreasing the change in potential drop with increasing the tensile load was that the increase of the conductivity near the crack tip due to the tensile load caused the decreases of the resistance and internal inductance of the specimen. The relationship between the change in potential drop and the change in $K_I$ was not affected by demagnetization and was independent of the crack length.

• Journal of the Mineralogical Society of Korea
• /
• v.10 no.2
• /
• pp.148-161
• /
• 1997

Based on the X-ray powder diffraction (XRD) and M ssbauer spectroscopy, the thermal behavior and phase transformations of two clays are investigated for raw and fired conditions, which are collected from Kwangryeongli and Ildo district in Cheju Island. M ssbauer spectra at room temperature and 20for two clays show that paramagnetic Fe3- is the structural iron of the layer silicate and ferrihydrite, and superparamagnetic goethite has about 50% of total iron contents. The XRD peaks of hematite for the fired clays appear from 80$0^{\circ}C$ in Kwangryeongli clay and from $600^{\circ}C$ in Ildo district clay, respectively. The structural Fe2+ was completely oxidized into Fe3- at 40$0^{\circ}C$ for Kwangryeongli clay and 50$0^{\circ}C$~$600^{\circ}C$ for Ildo district clay, respectively. The structural Fe2+ was completely oxidized into Fe3- at 40$0^{\circ}C$. For the temperature ranging from 40$0^{\circ}C$ to $700^{\circ}C$~80$0^{\circ}C$, two fired clays exhibit the dehydroxylation of the clay mineral. A disintegration of the clay mineral structure is observed from $700^{\circ}C$~80$0^{\circ}C$ to 110$0^{\circ}C$, followed by the onset and spread of vitrification process. It is also shown that well-crystallized hematite phase is formed at the temperature higher than 110$0^{\circ}C$ and the relative absorption area decreases, which might be related to the recrystallization of alluminosilicate matrix.

• BMB Reports
• /
• v.30 no.6
• /
• pp.397-402
• /
• 1997

A thiol-specific spin label was attached to cysteine-102 of yeast cytochrome c and electron paramagnetic resonance (EPR) spectra were measured as a function of added cytochrome c oxidase concentration. The intensity decreased due to line broadening as cytochrome c formed a complex with cytochrome c oxidase and reached a minimum when the ratio of cytochrome c to cytochrome c oxidase became one. Replacement of either Lys-72 or Lys-87 of cytochrome c by Glu did not result in a significant change in binding affinity. Interestingly the K72E mutant, unlike K87E, had a much lower rate of electron transfer than the wild type. These results indicate that many positively charged residues as a group participate in complex formation but Lys-72 might be important for cytochrome c to be locked in an orientation for an efficient electron transfer. A stoichiometry of 1 was also confirmed by optical absorption of the cytochrome c-cytochrome c oxidase complex which had been run through a gel chromatography cloumn to remove unbound cytochrome c. The EPR spectrum of this 1:1 complex, however, was a mixture of two components. This explains a biphasic kinetics for a single binding site on cytochrome c oxidase without invoking conformational transition.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.2
• /
• pp.91-101
• /
• 2011

Perfusion magnetic resonance imaging (pMRI) is a special technique for evaluation of blood flow. Exogenous pMRI methods which are dynamic susceptibility contrast (DSC) and dynamic contrast-enhanced (DCE) use an intravenous bolus injection of paramagnetic contrast agent. In contrast, an endogenous pMRM method which is arterial spin labeling (ASL) use diffusible blood in body. In order to scan pMRI in human, technical optimizations are very important according to disease conditions. For examples, DSC is popularly used in patients with acute stroke due to its short scan time, while DSC or DCE provides the various perfusion indices for patients with tumor. ASL is useful for children, women who are expected to be pregnant, and in patients with kidney diseases which are problematic in nephrogenic systemic fibrosis (NSF). Perfusion MRI does not require any injection of radioisotopes. We expect that demand for perfusion MRI will be higher in evaluating drug efficacy and other treatment effects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.455-462
• /
• 2017

The magnetic interaction between elliptic Janus magnetic particles are investigated using a direct simulation method. Each particle is a one-to-one mixture of paramagnetic and nonmagnetic materials. The fluid is assumed to be incompressible Newtonian and nonmagnetic. A uniform magnetic field is applied externally in a horizontal direction. A finite-element-based fictitious domain method is employed to solve the magnetic particulate flow in the creeping flow regime. In the magnetic problem, the magnetic field in the entire domain, including the particles and the fluid, is obtained by solving the governing equation for the magnetic potential. Then, the magnetic forces acting on the particles are calculated via a Maxwell stress tensor formulation. In a single particle problem, it is found that the orientation angle at equilibrium is affected by the aspect ratio of the particle. As for the two-particle interaction, the dynamics and the final conformation of the particles are significantly influenced by the aspect ratio, the orientation, and the spatial positions of the particles. For the given positions of the particles, the fluid flow is also influenced by the orientation of each particle. The self-assembly structure of the particles is not a fixed one, but it varies with the above-mentioned factors.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.258-262
• /
• 1996

We have investigated the changes in magnetoresistive characteristics, interfacial roughness, and preferred orientation with the Fe buffer layer thickness, annealing temperature, and the stacking number of layers variation in Fe/[NiFe/Cu] multilayers by using the 3-gun d.c. magnetron sputtering method. Intensity of the (200) orientation was increased with the increment of the Fe-buffer layer thickness. We found a maximum magnetoresistance ration of 4.7%, when the buffer layer thickness was 70$\AA$, and the field sensitivity also showed a maximum value at the same thickness. We varied the stacking number of multilayers with fixing the Fe buffer layer thickness of 70$\AA$. When the stacking number was 40 layers, maximum MR ratio(5.3%) was observed. With the variation of annealing temperature no change in the MR ratio was found beyond $300^{\circ}C$. But decrement of MR ratio was observed above $300^{\circ}C$. This decrement of the MR ratio was responsible for the increment of paramagnetic mixed layer caused by the diffusion of Cu layer and the change of antiferromagnetic coupling.

• Journal of Powder Materials
• /
• v.13 no.4 s.57
• /
• pp.285-289
• /
• 2006

Co-Fe-Ni-B-Si-Cr based amorphous strips containing nitrogen were manufactured via melt spinning, and then devitrified by crystallization treatment at the various annealing temperatures of $300^{\circ}C{\sim}540^{\circ}C$ for up to 30 minutes in an inert gas $(N_2)$ atmosphere. The microstructures were examined by using XRD and TEM and the magnetic properties were measured by using VSM and B-H meter. Among the alloys, the amorphous ribbons of $Co_{72.6}Fe_{9.8}Ni_{5.5}B_{2.4}Si_{7.1}Cr_{2.6}$ containing 121 ppm of nitrogen showed relatively high saturation magnetization. The alloy ribbons crystallized at $540^{\circ}C$ showed that the grain size of $Co_{72.6}Fe_{9.8}Ni_{5.5}B_{2.4}Si_{7.1}Cr_{2.6}$ alloy containing 121 ppm of nitrogen was about f nm, which exhibited paramagnetic behavior. The formation of nano-grain structure was attributed to the finely dispersed Fe4N particles and the solid-solutionized nitrogen atoms in the matrix. Accordingly, it can be concluded that the nano-grain structure of 5nm in size could reduce the core loss within the normally applied magnetic field of 300A/m at 10kHz.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.210-213
• /
• 1999

Magnetoresistance and magnetization of Sr$_{l-x}K_xBiO_3$ were both measured as functions of temperature and magnetic field. Resistivity goes to zero at T=10.1K and the overall superconducting transition behavior under applied magnetic fields is similar to that of other BiO based superconductors. Also, below T<5K we have observed the reappearance of finite resistivity with a power law temperature dependence( ${\rho}$ ${\sim}$T$^1$); the reentrant superconducting transition of resistivity. Contrary to the Josephson weak link effect in polycrystalline samples, which gives the depression of the superconducting state with increasing electrical current or magnetic field, the superconducting state for T<5K is resumed by applying a higher current or magnetic field. Magnetic susceptibility( ${\chi}$ ) of Sr$_{l-x}K_xBiO_3$ for T<5K also shows similar trends to that observed in transport measurements: increase of ${\chi}$ (paramagnetic-like behavior) at a low magnetic fields(B=50 Oe) and, the resumption of perfect diamagnetism at high fields.

• Journal of the Korean Chemical Society
• /
• v.39 no.5
• /
• pp.356-363
• /
• 1995

The chemical behavior of the transition metal (Nb4+ and Mo4+) complexes with organoligand (dichloro-bis(η-cyclopentadienyl) has been investigated by the UV/vis-spectrophotometric, magnetic, and electrochemical method. The two or three energy absorption bands are observed by the spectra of these complexes. The magnitude of crystal field splitting energy, the spin pairing energy and bond strength was obtained from the spectra of the complexes. These are found to be delocalization, low-spin state, and strong bonding strength. The magnetic dipolemoment are found to be paramagnetic and diamagnetic complexes. The redox reaction processes of complexes were investigated by cyclic voltammetry in aprotic media. As a result the redox reaction proceses of Nb-C complex was couple-single reaction with diffusion and reaction current one electron process, and also Mo-C complex was couple-single reaction with reaction current of one electron process.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.192-192
• /
• 2009

Magnetic and magnetotransport properties of (1-x) $La_{0.7}Sr_{0.3}MnO_3-xRE_2O_3$ (RE=La, Nd) (x = 0.025, 0.05, 0.075, 0.1, 0.2, 0.3) composite polycrystalline samples were systematically studied. Samples were prepared using conventional solid-state reaction. LSMO and $RE_2O_3$ react at high temperature and become chemically compatible. The ferromagnetic-paramagnetic transition temperatures ($T_c$) of the LSMO-$Nd_2O_3$ composite samples were decreased 313K~349K with increasing x, while the $T_c$ values of the LSMO-$La_2O_3$ composite samples were almost unaltered in the range of 355K~358K, representing that the ferromagnetism of LSMO might be more seriously degraded by Nd substitution on the ($La_{0.7}Sr_{0.3}$) site. However, LSMO-$RE_2O_3$ composite samples exhibit greatly enhanced low field magnetoresistance (LFMR) and dMR/dH value without an appreciable increase in its resistivity. Remarkably improved LFMR properties are attributed to LSMO grain boundaries acting as effective spin-dependent scattering centers. The relationship among the $RE_2O_3$ addition, microstructure, magnetic and magnetotransport properties will be discussed in this paper.