• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.154-155
• /
• 2007

This paper describes frequency response of two-mass system for gyroscope applications. The two-mass system of the proposed device is adapted to the sensing part of the gyroscope in this research. Two-mass system has two resonant peaks and wide flat region between two resonant peaks. The resonant frequency of driving part is in this flat region. Therefore, frequency tuning is not necessary for mode matching. In the proposed device, resonant frequency is designed as 7183 Hz in driving part. Mass ratio of two masses in sensing part is 0.1 and device size is 6 mm $\times$ 6 mm. The device is fabricated by SiOG process. The fabricated spring width is increased from $4{\mu}m$ to $4.5{\sim}4.7{\mu}m$, and the measured resonant frequency is 8392 Hz in driving mode. We operated the sensing part using parallel plate of proof mass to verify the sensing part. It is confirmed the device has a wide fiat region in frequency response curve and the resonant frequency of the driving part is in the wide flat region of sensing mode.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.16-28
• /
• 2014

This paper presents a novel high-power-factor circuit topology of AC to AC current-fed type high frequency resonant inverter which includes the function of power factor correction(PFC) in the proposed inverter to operate the AC input block with high power factor. The proposed circuit topology of AC to AC current fed type high resonant inverter removes DC link electrolytic capacitor and has also the one of power factor correction(PFC) in the inverter circuit without an additional PFC circuit since the input current by constituting it in parallel as an unit inverter, which assumes the class-E high frequency resonant inverter of conventional current-fed type, flows in the form of the resultant current flowing through each constant current reactor($L_{d1}$, $L_{d2}$). The circuit analysis of proposed inverter is generally described by adopting the normalized parameters and the evaluation of its operating characteristics are conducted by using the parameters such as the ratio of switching and resonant frequency(${\mu}$), coupling coefficient(k) and so on. An example of procedure for circuit design based on the characteristic values obtained from the theoretical analysis is presented. To confirm the validity of the theoretical analysis, the experimental results are also presented. In the future, the proposed inverter shows it can be practically used as power supply system for induction heating application, DC-DC converter etc.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.55-64
• /
• 2007

본 논문은 부하직렬 고주파 공진 DC/DC 컨버터에 가변 가능한 공진커패시터를 병렬로 삽입한 LCC형 고주파 공진 DC/DC 컨버터의 특성과 설계 예를 나타내고 있으며, 또한 턴-오프시 스위칭 손실을 줄이기 위해 ZVS를 가지는 소프트 스위칭을 사용하였다. 제안 컨버터는 PFM(Pulse Frequency Modulation) 스위칭 패턴을 사용하여 동작되며, PFM 제어에 의해 제안 회로의 출력전압을 제어하였다. 병렬커패시터의 커패시턴스의 변화에 따라, DC/DC 컨버터의 분석은 일반적으로 무차원화 파라미터를 사용하여 나타내었고, 회로 동작 특성은 스위칭 주파수와 파라미터로 행하였다. 또한 본 논문은 특성평가에 의해 제안 DC/DC 컨버터의 동작 특성과 회로 설계 방법을 제시하였다. 더욱이 본 논문은 실험을 통해 이론 분석의 정당성을 입증하였다. 향후 제안한 DC/DC 컨버터는 반도체 및 FPD의 클린룸에 선형이동 시스템의 비접촉 전원장치에 적용 가능하다고 생각된다.

• ETRI Journal
• /
• 제31권1호
• /
• pp.77-79
• /
• 2009

The wave concept iterative procedure (WCIP) is used to analyze a quasi-square open metallic ring frequency selective surface (FSS). The quasi-square open metallic ring FSS is dual-polarized. When the incident plane wave is polarized in a direction parallel to the FSS' coupled parallel strips, it shows two rejecting bands. Moreover, another rejecting band can be obtained if the source plane wave is perpendicularly polarized with respect to the FSS' coupled parallel strips. The three resonant frequencies are inversely proportional to the length of the FSS' coupled strips to provide an easy fine tuning of the FSS structure. The simulated results obtained using WCIP are compared to the measured results, and a good agreement is reported.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.759-762
• /
• 2002

A ZCT(Zero Current Transition) PWM(Pulse-Width-Modulation) boost converter using parallel MOSFET switch is proposed in this paper. The IGBT(main switch) of the proposed converter is always turned on with zero current switching and turned off with zero current/zero voltage switching. The MOSFET(auxiliary switch) is also operates with soft switching condition. In addtion to, the proposed converter eliminates the reverse recovery current of the freewheeling diode by adding the resonant inductor, Lr, in series with the main switch. Therefore, the turn on/turn off switching losses of switches are minimized and the conduction losses by using IGBT switch are reduced. In addition to, using parallel MOSFET switch overcomes the switching frequency limitation occurred by current tail. As mentioned above, the characteristics are verified through experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.128-137
• /
• 2015

A novel parallel three-level zero voltage switching (ZVS) DC converter is presented for medium voltage applications. The proposed converter includes three sub-circuits connected in parallel with the same power switches to share load current and reduce the current stress of passive components at the output side. Thus, the size of the output chokes is reduced and the switch counts in the proposed converter are less that in the conventional parallel three-level DC/DC converter. Each sub-circuit combines one half-bridge converter and one three-level converter. The transformer secondary windings of these two converters are connected in series in order to reduce the size of output inductor. Due to the three-level circuit topology, the voltage stress of power switches is equal to $V_{in}/2$. Based on the resonant behavior by the output capacitance of power switches and the leakage inductance (or external inductance) at the transition interval, each switch can be turned on under ZVS. Finally, experiments based on a 2 kW prototype are provided to verify the performance of the proposed converter.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.94-102
• /
• 2003

본 논문은 고주파 전원에 사용되는 풀 브릿지 부하 병렬형 고주파 공진 인버터 회로를 연구대상으로 하고 출력제어기법으로는 펄스 주파수 변조(PFM, 펄스 폭 변조(PWM) 그리고 펄스 위상 변화(Phase-Shift)잎 경우를 비교 검토하였다. 회로의 해석은 정규화 파라메타를 도입하여 범용성 있게 기술하였고, 인버터 특성은 3가지 구동신호패턴에 의한 스위칭 주파수($\mu$), 펄스폭($\theta$d), Phase-Shift의 위상차각($\phi$)의 변화와 제 파라메타에 따라 특성 평가를 행하였다. 실험을 통해 이론해석의 타당성을 검증하였다. 향후, 3가지의 구동신호제어기법에 의한 특성들은 유도가열 응용, DC-DC 컨버터 등의 전원 시스템의 출력제어 시에 유용한 자료로 제공될 것으로 사료된다.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.181-190
• /
• 2007

This paper presents a novel circuit topology of a DC bus line series switch and parallel snubbing capacitor-assisted soft-switching PWM full-bridge inverter type DC-DC power converter with a high frequency planar transformer link, which is newly developed for high performance arc welding machines in industry. The proposed DC-DC power converter circuit is based upon a voltage source-fed H type full-bridge soft-switching PWM inverter with a high frequency transformer. This DC-DC power converter has a single power semiconductor switching device in series with an input DC low side rail and loss less snubbing capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge arms and DC bus line can achieve ZCS turn-on and ZVS turn-off transition commutation. Consequently, the total switching power losses occurred at turn-off switching transition of these power semiconductor devices; IGBTs can be reduced even in higher switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules can be realized at 60 kHz. It is proved experimentally by power loss analysis that the more the switching frequency increases, the more the proposed DC-DC power converter can achieve a higher control response performance and size miniaturization. The practical and inherent effectiveness of the new DC-DC converter topology proposed here is actually confirmed for low voltage and large current DC-DC power supplies (32V, 300A) for TIG arc welding applications in industry.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.892-904
• /
• 2017

A design of a Class-E inverter with only one inductor and one capacitor is presented. It is operated at the optimal operation mode for domestic cooker. The design principle is based on the zero-voltage derivative switching (ZVDS) of the Class-E inverter with a parallel load network, which is a parallel resonant equivalent circuit. An induction load characterization is obtained from a large-signal excitation test bench, which is the key to an accurate design of the induction cooker system. Consequently, the proposed scheme provides a more systematic, simple, accurate, and feasible solution than the conventional quasi-resonant inverter analysis based on series load network methodology. The derivative of the switch voltage is zero at the turn-on transition, and its absolute value is relatively small at the turn-off transition. Switching losses and noise are reduced. The parameters of the ZVDS Class-E inverter for the domestic induction cooker must be selected properly, and details of the design of the components of this Class-E inverter need to be addressed. A 1,200 W prototype is designed and evaluated to verify the validation of the proposed topology.

• 조명전기설비학회논문지
• /
• 제14권1호
• /
• pp.109-117
• /
• 2000

본 논문은 고주파 유도가열용 전원에 사용되는 인버터에 WVF 기능을 부여한 풀-브릿지형 복공진 고주파 인버터회로를 제시하였다. 제안한 인버터는 직렬공진회로의 전류를 병렬공진회로의 주입전류로 사용하기 때문에 스위치의 전류 분담을 감소시킬 수 있으며, 또한 본 논문은 Phase-shift를 이용하여 스위칭 주파수와는 무관한 독립 출력 제어를 행하였다. 회로의 해석은 정규화 파라메타를 도입하여 범용성 있게 기술하였고, 인버터 특성을 스위칭 주파수, Phase-shift의 위상차각($\phi$) 변화와 제 파라메타에 따라 특성평가를 행하였다. 또한, 이론해석에서 얻은 특성값을 기초로 한 회로 설계 기법의 일 예도 제시하였다. 첨가해서, 실험을 통해 이론 해석의 타당성을 검증하였으며, 향후 유도가열 응용, OC-OC 컨버터 등의 전원 시스템에 웅용 가능성을 보여주고 있다.