• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.157-163
• /
• 2002

Consideration for parallel operation in a high power system has been increased due to the advantages of parallel operation like as high productivity, simplicity of design, and redundancy of power. This paper discussed the parallel operation of DC-DC Converter, Which Can be used as a high power system, is studied. Based on the small signal model of DC-DC Converter, the simple and exact power stage model of parallel operation system is derived and the parallel operation system using current balance method for the uniform current distribution among the parallel operation system is discussed. To verify the high performance of the proposed DC-DC converter system for parallel operation, the simulation test of the parallel operation, which has 2 Converter modules, is accomplished.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.3
• /
• pp.256-262
• /
• 2013

In the large system such DC distribution for building, the method that a number of modules converters operation in parallel is commonly used. When parallel operation, circulating current is directly related to the loss of the entire system. Accordingly, each module to share the same current is the most important for the safety of the power system. In this paper, control method for reducing circulating current in parallel operation is proposed. furthermore response and operation of steady-state with parallel system was verified by simulation and experiment results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.4
• /
• pp.88-95
• /
• 2013

A new droop control method which can be applied to 3-phase 4-wire uninterruptible power supply is proposed in this paper. The droop control method for parallel operation is very attractive one as UPS parallel operation can be carried out without any data communication devices provided among UPS systems connected, but it reportedly shows a PnP(plug-and-play) problem. A basic reason why a circulating current could flow among parallel-connected UPS systems is clearly investigated as well when droop-controlled-ups systems are operated in the manner of PnP. The proposed algorithm is deduced from the investigated result and is basically structured to keep a balanced frequency and balanced voltage profile against power variation. This paper shows that balanced parallel operation of droop control method can be obtained under unbalanced load as well as balanced load conditions when PnP operation is needed and load change occurs.

• Journal of The Korean Astronomical Society
• /
• v.49 no.4
• /
• pp.157-162
• /
• 2016

High resolution reconstruction technology is developed to help enhance the spatial resolution of observational images for ground-based solar telescopes, such as speckle masking. Near real-time reconstruction performance is achieved on a high performance cluster using the Message Passing Interface (MPI). However, much time is spent in reconstructing solar subimages in such a speckle reconstruction. We design and implement a novel parallel method for speckle masking reconstruction of solar subimage on a shared memory machine using the OpenMP. Real tests are performed to verify the correctness of our codes. We present the details of several parallel reconstruction steps. The parallel implementation between various modules shows a great speed increase as compared to single thread serial implementation, and a speedup of about 2.5 is achieved in one subimage reconstruction. The timing result for reconstructing one subimage with 256×256 pixels shows a clear advantage with greater number of threads. This novel parallel method can be valuable in real-time reconstruction of solar images, especially after porting to a high performance cluster.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1121-1130
• /
• 2004

The Genetic Algorithm (GA), an optimization technique based on the theory of natural selection, has proven to be a relatively robust means of searching for global optimum. It converges to the global optimum point without auxiliary information such as differentiation of function. In the case of a complex problem, the GA involves a large population number and requires a lot of computing time. To improve the process, this research used parallel processing with several personal computers. Parallel process technique is classified into two methods according to subpopulation's size and number. One is the fine-grained method (FGM), and the other is the coarse-grained method (CGM). This study selected the CGM as a parallel process technique because the load is equally divided among several computers. The given design domain should be reduced according to the degree of feasibility, because mechanical system problems have constraints. The reduced domain is used as an initial design domain. It is consistent with the feasible domain and the infeasible domain around feasible domain boundary. This parallel process used the Message Passing Interface library.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.776-783
• /
• 2009

Current-cut circuit is an effective method to obtain low power consumption in wireless communication systems as high speed OFDM. For the operation of current-mode FFT LSI with analog signal processing essentially requires current-mode serial-to-parallel/parallel-to-serial converter with multi input and output structure. However, the Hold-mode operation of current-mode serial-to-parallel/parallel-to-serial converter has unnecessary power consumption. We propose a novel current-mode serial-to-parallel/parallel-to-serial converter with current-cut circuit and full chip simulation results agree with experimental data of low power consumption. The proposed current-mode serial-to-parallel/parallel-to-serial converter promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.81-90
• /
• 2015

This paper investigates the droop control-based real and reactive power load sharing with a virtual inductor when the line impedance between inverter and Point of Common Coupling (PCC) is partly and unequally resistive in high-capacity systems. In this paper, the virtual inductor method is applied to parallel inverter systems with resistive and inductive line impedance. Reactive power sharing error has been improved by applying droop control after considering each line impedance voltage drop. However, in high capacity parallel systems with large output current, the reference output voltage, which is the output of droop controller, becomes lower than the rated value because of the high voltage drop from virtual inductance. Hence, line impedance voltage drop has been added to the droop equation so that parallel inverters operate within the range of rated output voltage. Additionally, the virtual inductor value has been selected via small signal modeling to analyze stability in transient conditions. Finally, the proposed droop method has been verified by MATLAB and PSIM simulation.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.55-58
• /
• 2002

Parallel finite element code has been recently developed for the analysis of the incompressible Wavier-Stokes equations using domain decomposition method. Metis and MPI libraries are used for the domain partitioning of an unstructured mesh and the data communication between sub-domains, respectively. For unsteady computation of the incompressible Navier-Stokes equations, 4-step splitting method is combined with P1P1 finite element formulation. Smagorinsky and dynamic model are implemented for the simulation of turbulent flows. For the validation performance-estimation of the developed parallel code, three-dimensional Laplace equation has been solved. It has been found that the speed-up of 40 has been obtained from the present parallel code fir the bench mark problem. Lastly, the turbulent flows around the MIRA model and Tiburon model have been solved using 32 processors on IBM SMP cluster and unstructured mesh. The computed drag coefficient agrees better with the existing experiment as the mesh resolution of the region increases, where the variation of pressure is severe.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.327-329
• /
• 2001

This paper presents the application of Parallel genetic algorithm and parallel tabu search to search an optimal solution of a unit commitment problem. The proposed method previously searches the solution globally using the parallel genetic algorithm, and then searches the solution locally using tabu search which has the good local search characteristic to reduce the computation time. This method combines the benefit of both method, and thus improves the performance. To show the usefulness of the proposed method, we simulated for 10 units system. Numerical results show the improvements of cost and computation time compared to previous obtained results.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.715-718
• /
• 2000

Although shared memory parallel programs are designed to be deterministic both in their final results and intermediate states, the races that occur when different processes access a common memory location in an order not guaranteed by synchronization could result in unintended non-deterministic executions of the program. So, Detecting races, particularly first data races, is important for debugging explicit shared memory parallel programs. It is possible that all data races reported by other on-the-fly algorithms would disappear once the first races were removed. To detect races parallel programs with nested loops and inter-thread coordination, it must guarantee the order of synchronization operations in an execution instance. In this paper, we propose an improved restructuring method that guarantee ordering execution instance and preserve the semantics of original program. This method requires O(np) time and (s + up) space, where n is the number of total operations, s is the number of synchronization operations and p is the number of parallelism in the execution. Also, this method makes on-the-fly detection of parallel program with nested loops and inter-thread coordination more easily in space and time complexity.