• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.521-530
• /
• 2009

This study has been made to execute a research in order to lead the improvement of indoor air quality, examining the indoor ventilation characteristics by using a numerical analysis method. To this end an extensive parametric investigation are made according to various external flow variables such as main wind direction and wind speed by season, building layout design, and location of ventilators, etc. in Daedeok Techno Valley, one of large-scaled apartment in Daejeon. It is observed there was a significant difference of main wind direction between summer and winter. The main wind direction in summer was a south wind, and on the contrary the direction in winter is northnorthwest, which is similar to the average main wind direction for 10 years. One of the important calculation results is that the change of wind direction causes a significant effect on the apartment ventilation by the change of pressure difference around each complex of apartment. In case of favorable area of ventilation, the indoor ventilation rate can meet 0.7 ACH from the standard value only with natural ventilation. On the contrary, in other area the value was much lower than the standard value. If the calculation result applies to the design of layout apartment or placement of ventilators, it will be greatly helpful to the energy saving because it can be parallel with the natural ventilation to help securing ventilation rate, not much depending on the mechanical ventilation.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.763-768
• /
• 2013

The simulation investigation on the availability with failure density function of major equipment for a sewage treatment plant has been carried out. This study focuses on the availability of the plant and criticality with equipment module induced by component layout and its failure function. The equipment classification of sewage treatment plant and its failure function are established. Also solution methodologies are introduced as Monte-Carlo simulation method and event algorithm for uncertainty problem. The availability in the case of serial connection of equipment with all exponential function is calculated as around 50.4%. In other case of parallel combination with back up equipment, the availability showed over 80.1%. The criticality that a ffects availability showed high value over 77% in the dehydration and concentration process of sludge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.148-156
• /
• 2001

This paper proposed embedded application-specific microprocessor(YS-RDSP) whose structure has an additional DSP processor on chip. The YS-RDSP can execute maximum four instructions in parallel. To make program size shorter, 16-bit and 32-bit instruction lengths are supported in YS-RDSP. The YS-RDSP provides programmability. controllability, DSP processing ability, and includes eight-kilobyte on-chip ROM and eight-kilobyte RAM. System controller on the chip gives three power-down modes for low-power operation, and SLEEP instruction changes operation statue of CPU core and peripherals. YS-RDSP processor was implemented with Verilog HDL on top-down methodology, and it was improved and verified by cycle-based simulator written in C-language. The verified model was synthesized with 0.7um, 3.3V CMOS standard cell library, and the layout size was 10.7mm78.4mm which was implemented by using automatic P&R software.

• Journal of architectural history
• /
• v.18 no.3
• /
• pp.7-25
• /
• 2009

Hakbongjongtaek(The head house of Uisong Kim family, 鶴峯宗宅), firstly built in the early 17th century, was moved to its neighboring place in the late 18th century. The man who led the relocation(移建) of the house was the eldest grandson of the family, Jong-soo, Kim. He made and overall plan and also participated in building the house. There remain four Gados(family paintings, 가도(家圖)) related to the relocation plan. This paper aims to make an analysis of these Gados, and through analysis, to find what was the essential poing of the relocation plan and how the point was represented in the paintings. The result of analysis is as follows: 1. The main focus of relocation plan was the form of Anchae(the inner house). Anchae was designed as asymmetrical form, and restricted to four kan. Only Andaechung needed to be 6 kan size for religious ceremonies. 2. For the design of Sarangchae, the displacement of large Sarangbang and small Sarangbang was an important issue. There were two ways of layout: parallel type and facing type. The latter was chosen. 3. The representation and techniques of Gado is quite concrete, in spite of differences among them. The expression of doors, windows, attic and kitchen was based on the understanding of space. Also the spatial division, which was expressed line on the grid, was based on the scaled ruler. As we've seen before, painting the relocation plan was a kind of endeavors to make the housing type as a realization of Garye. Also, we can find out that role of the eldest grandson of the family was quite important to carry out the plan. As well as, it was meaningful to examine Sadaebu (the aristocrat of Chosun)'s perception of housing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.287-295
• /
• 2010

In this paper, we introduce a novel approach to optimization algorithm which is a distributed Mean field Genetic algorithm (MGA) implemented in MPI(Message Passing Interface) environments. Distributed MGA is a hybrid algorithm of Mean Field Annealing(MFA) and Simulated annealing-like Genetic Algorithm(SGA). The proposed distributed MGA combines the benefit of rapid convergence property of MFA and the effective genetic operations of SGA. The proposed distributed MGA is applied to the channel routing problem, which is an important issue in the automatic layout design of VLSI circuits. Our experimental results show that the composition of heuristic methods improves the performance over GA alone in terms of mean execution time. It is also proved that the proposed distributed algorithm maintains the convergence properties of sequential algorithm while it achieves almost linear speedup as the problem size increases.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.4
• /
• pp.61-75
• /
• 2021

Roadside greenery in the city is not only a means of reducing fine dust, but also an indispensable element of the city in various aspects such as improvement of urban thermal environment, noise reduction, ecosystem connectivity, and aesthetics. However, in studies dealing with the effect of reducing fine dust through trees in existing urban spaces, microscopic aspects such as the adsorption effect of plants were dealt with, structural changes such as the width of urban buildings and streets, and the presence or absence of trees, Impact studies that reflect the actual form of In this study, the effect of greenery composition applicable to urban space on PM2.5 was simulated through the microclimate epidemiologic model ENVI-met, and field measurements were performed in parallel to verify the results. In addition, by analyzing the results of fine dust background concentration, wind speed, and leaf area index, the sensitivity to major influencing variables was tested. As a result of the study, it was confirmed that the fine dust reduction effect was the highest in the case with a high planting amount, and the reduction effect was the greatest at a low background concentration. Based on this, the cost of planting street green areas and the effect of reducing PM2.5 were compared. The results of this study can contribute as a basis for considering the effect of pedestrian space on air quality when planning and designing street green spaces.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.253-260
• /
• 2020

With increasing interest in an underground-type ammunition storage facility, several design results have been provided recently. However, since not only experts in the tunnel but also military persons in charge of ammunition have not fully understood the safety distance standard, reliable design results are not being produced. In this study, the effective design method of an underground-type ammunition storage facility was provided by analyzing the current safety distance standard. First, the critical safety distances that dominate the size of construction site for underground-type ammunition storage facilities were evaluated, which are the layout of chambers and the configuration of the entrances. Then, the decreasing effect of inter-chamber distance was studied according to the rock type and the storage density of ammunition. In addition, the method of designing tunnels with parallel lines and two-floors was considered for arranging more chambers while complying with the safety distance standards. In particular, numerical simulations were carried out to determine the satisfaction of the safety distance standards when an underground-type ammunition storage facility is composed of two-floor and the decreasing effect of inter-chamber distance according to the inner explosive pressure reduction. Finally, the method to adjust the size of entrances and the path of pressure were studied for decreasing the safety distance at the entrance.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.179-189
• /
• 2014

The Saemaeul Movement, which is the representative national campaign of Korea aimed at the development of local communities, has drawn a great deal of attention from home and abroad and formed an element of Korea's national brand since 2000. Accordingly, this research was conducted for the purpose of constructing a memorial park in Shindo Village, Cheongdo County, North Kyoungsang Province, which is a home to the Saemaeul Movement. As the Saemaeul Movement is benchmarked by many countries around the world today, this research aims to communicate the spirit and social value of the movement and disseminate its effects of local community development in rural areas through the construction of a memorial park. In this study, the design motive of the memorial park was conceived through the historical review and case studies of the Saemaeul Movement. In parallel, theoretical study was also conducted on design techniques as the basis of this research. In consideration of the characteristics of a technical article, this research was conducted in several phases. In the first phase, the conditions of the site where the park construction was planned were analyzed and the direction of its development was set. In the second phase, the main theme and the basic principles of planning were established, and the contents of the park construction project were devised in detail. In the last phase, a comprehensive plan was established, including a space layout to accommodate activities, facilities and programs to be introduced to the park. The park construction site ($106,000m^2$) was divided into four zones (memorial zone, historical theme park, education zone and experience zone) based on circulation planning aimed at creating memorial space, and was linked to eco-friendly ecological space in consideration of environmental features. At a time when the Saemaeul Movement is being propagated across the world, the result of this study will help create a place for its memorial and play a pivotal role to boost international movements aimed at promoting co-prosperity across the global village. It will also bear significance as an example of theme-based park construction in a rural area and the invigoration of a local community.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.67-76
• /
• 2011

This paper describes the development of interactive visualization techniques and a program that allow us to visualize the structure of the volume data and interactively select and visualize the isosurface components using contour tree. The main characteristic of this technique is to provide an algorithm that draws the contour tree in 2D plane in a way that users easily understand the tree, and to provide an algorithm that can efficiently extract an isosurface component utilizing GPU's parallel architecture. The main characteristic of the program we developed through implementing the algorithms is to provide us with an interactive user interface based on the contour tree for extracting an isosurface component and visualization that integrates with previous isosurface and volume rendering techniques. To show the excelland vof our methods, we applied 3D biomedical volume data to our algorithms. The results show that we could interactively select the isosurface components that represent a polypeptide chain, a ventricle and a femur respectively using the user interface based on our contour tree layout method, and extract the isosurface components with 3x-4x higher speed compared to previous methods.

• Journal of architectural history
• /
• v.19 no.3
• /
• pp.7-29
• /
• 2010

The form of the Wangheungsa Temple's wooden pagoda site is that of the traditional form of the wooden pagodas constructed during the Baekjae Period. Likewise, it is an important ruin for conducting research on the form and type of the wooden pagodas constructed during the Baekjae Period. In particular, the method used for the installation of the central pillar's cornerstone is a new technique. The purpose of this research is to restore the ruin of the Wangheungsa Temple's wooden pagoda of the Baekjae Period that remains at the Wangheungsa Temple's wooden pagoda site. Until now, research conducted on the wooden pagoda took place mostly centered on the Hwangryongsa Temple's wooden pagoda. Meanwhile, the reality concerning Baekjae's wooden pagoda is one in which there were not many parallel cases pertain to the design for restoration. This research paper wants to conduct academic examination of the Wangheungsa Temple's wooden pagoda to organize the intention of design and design process in a simple manner. This research included review of the Baekjae Period's wooden pagoda related ruins and the review of the existing wooden pagoda ruin to analyze the wooden pagoda construction technique of the era. Then, current status of the Wangheungsa Temple's wooden pagoda site is identified to define the characteristics of the wooden pagoda, and to set up the layout format and the measure to estimate the size of the wooden pagoda in order to design each part. Ultimately, techniques and formats used for the restoration of the wooden pagoda were aligned with the wooden pagoda of the Baekjae Period. Basically, conditions that can be traced from the current status of the Wangheungsa Temple site excavation using the primary standards as the standard. Wangheungsa Temple's wooden pagoda was designed into the wooden pagoda of the Baekjae's prosperity phase. The plane was formed into $3{\times}3$ compartments to design into three tier pagoda. The height was decided by factoring in the distance between the East-West corridors, size of the compartment in the middle, and the view that is visible from above the terrace when entering into the waterway. Basically, the origin of the wooden structure format is based on the Goguryeo style, but also the linkage with China's southern regional styles and Japan's ancient wooden pagoda methods was factored in. As for the format of the central pillar, it looks as if the column that was erected after digging the ground was used when setting up the columns in the beginning. During the actual construction work of the wooden pagoda, central pillar looks as if it was erected by setting up the cornerstone on the ground. The reason that the reclaimed part of pillar that use the underground central cornerstone as the support was not utilized, was because the Eccentric Load of the central pillar's cornerstone was factored in the state of the layers of soil piled up one layer at a time that is repeated with the yellow clay and sandy clay and the yellow clay that were formed separately with the $80cm{\times}80cm$ angle at the upper part of the central pillar's cornerstone was factored in as well. Thus, it was presumed that the central pillar was erected in the actual design using the ground style format. It is possible to presume the cases in which the reclaimed part of pillar were used when constructed for the first time, but in which central pillar was installed later on, after the supplementary materials of the underground column is corroded. In this case, however, technique in which soil is piled up one layer at a time to lay down the foundation of a building structure cannot be the method used in that period, and the reclamation cannot fill up using the $80cm{\times}80cm$ angle. Thus, it was presumed that the layers of soil for building structure's foundation was solidified properly on top of the central pillar's cornerstone when the first wooden pagoda construction work was taking place, and that the ground style central pillar was erected on its upper part by placing the cornerstone once again. Wangheungsa Temple's wooden pagoda is significant from the structure development aspect of the Korean wooden pagodas along with the Hwangryongsa Temple's wooden pagoda. Wangheungsa Temple's wooden pagoda construction technique which was developed during the prosperity phase of the Baekjae Period is presumed to have served as a role model for the construction of the Iksan Mireuksa Temple's wooden pagoda and Hwangryongsa Temple's wooden pagoda. With the plan to complement the work further by excavating more, the basic wooden pagoda model was set up for this research. Wangheungsa Temple's wooden pagoda was constructed as at the Baekjae Kingdom wide initiative, and it was the starting point for the construction of superb pagoda using state of the art construction techniques of the era during the Baekjae's prosperous years, amidst the utmost interest of all the Baekjae populace. Starting out from its inherent nature of enshrining Sakyamuni's ashes, it served as the model that represented the unity of all the Baekjae populace and the spirit of the Baekjae people. It interpreted these in the most mature manner on the Korean peninsula at the time.