• 한국운동역학회지
• /
• 제13권3호
• /
• pp.15-26
• /
• 2003

This study was conducted to investigate the performance times, CM position and CM speed, pole chord length and pole chord angle, whole body angular momentum(X axis), and grip width in pole vault event according to the event and phase; touch down, pole plant, take-off, maximum pole bending pole straight, pole release, peak height, and foot contact, pole contact, free flight. The pole vaulting of four male elite vaulters including six trial were filmed using two video digital cameras at 60 Hz at 56th national athletic match, and data were collected through the DLT method of three dimensional cinematography. In general the better jumper is, the longer the performance time is. And the greater CM speed is, and the better his transformation ability of CM horizontal speed into vertical speed is. As he uses a longer pole, his grip is higher, and it is a enough for him to rock back his body, so that he pulls and pushes the pole well keeping his hips close to. An greater maximum angular momentum and early positioning of the hips parallel to the bar makes his body far side of the bar and his bar clearance easier. Specially our national jumper needs to have more powerful braking force during foot contact phase, and take his body on the pole after maximum pole bending, and pull and push the pole strongly keeping his hips close to. Also he needs to have stronger muscular strength in order to control the longer pole and use the pole of proper tension more efficiently.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.237-243
• /
• 2004

A multichannel smart sound sensor capable to detect and identify sound events in noisy conditions is presented in this paper. Sound information extraction is a complex task and the main difficulty consists is the extraction of high­level information from an one-dimensional signal. The input of smart sound sensor is composed of data collected by 5 microphones and its output data is sent through a network. For a real time working purpose, the sound analysis is divided in three steps: sound event detection for each sound channel, fusion between simultaneously events and sound identification. The event detection module find impulsive signals in the noise and extracts them from the signal flow. Our smart sensor must be capable to identify impulsive signals but also speech presence too, in a noisy environment. The classification module is launched in a parallel task on the channel chosen by data fusion process. It looks to identify the event sound between seven predefined sound classes and uses a Gaussian Mixture Model (GMM) method. Mel Frequency Cepstral Coefficients are used in combination with new ones like zero crossing rate, centroid and roll-off point. This smart sound sensor is a part of a medical telemonitoring project with the aim of detecting serious accidents.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.9-11
• /
• 2018

This paper studies on the development of an electric fire prevention system with the detection and alarm in case of parallel arc fault occurrence in low voltage distribution lines. The proposed detector has the characteristics of high speed operation responsibility and superior system reliability from composition using a large number of semiconductor devices. The line voltage is always feedback, and when an arc or a spark occurs, these are detected by the microcomputer. In addition, we design and develop algorithms using high speed and high precision microcomputer. A new conceptual control technique is adopted that RCD cuts-off by forming a forced short circuit between the phase voltage and ground in the event of an electrical accident. Some experimental tests of the proposed system also confirm practicality and the validity of the analytical results.

• 한국해안해양공학회지
• /
• 제18권1호
• /
• pp.21-34
• /
• 2006

지진해일 위험재해도의 작성과 재해경감대책 수립을 위해서는 연안역의 상세한 수심 및 지형을 이용한 범람 시뮬레이션이 요구되고 있다. 본 연구에서는 Beowulf 병렬계산을 통해 동해 전 영역에서 정밀산정이 가능한 병렬유한요소모형을 이용하여 1983년 5월 26일 동해안에 내습한 지진해일에 대한 시뮬레이션을 수행하고, 그 계산 결과와 관측치와의 비교결과를 제시한다. 또한, 해안에서의 지진해일고의 통계적 분포에 대해 논하며, 해안에서의 지진해일고의 파고분포가 대수정규분포를 따르는 경향을 제시한다.

• 한국지진공학회논문집
• /
• 제10권3호
• /
• pp.35-45
• /
• 2006

지진해일 위험재해도의 작성과 재해경감대책 수립을 위해서는 연안역의 상세한 수심 및 지형을 이용한 시뮬레이션이 요구되고 있다. 본 연구에서는 Beowulf 병렬계산을 통해 동해 전 영역에서 정밀산정이 가능한 병렬유한요소모형을 이용하여 1993년 7월 12일 동해안에 내습한 지진해일에 대한 시뮬레이션을 수행하고, 그 계산 결과와 관측치와의 비교결과를 제시한다. 또한, 해안에서의 지진 해일고의 통계적 분포에 대해 논하며, 해안에서의 지진해일고의 파고분포가 전반적으로 대수정규분포를 따르는 경향을 제시하였다.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.240-248
• /
• 2014

It is DC power that Output of renewable energy being recently developed and researched. Also, demand of DC power will expect to proliferate due to increase of digital load. Thus, DC distribution system providing high quality of power and reliability has emerged as a new distribution system. If the conventional distribution systems are substituted by proposed DC distribution system, the output of renewable energy can be connected with distribution systems under minimum power conversion. Therefore, in the event of connection with DC load, it can construct an efficient distribution system. In this paper, the integrated parallel operation of power conversion module for DC distribution system is proposed. Also, this paper proposed modularization of power conversion devices for DC distribution system and power control for parallel operation of large capacity system. DC distribution system consists of three power conversion modules such as AC/DC power conversion module 2 set, ESS module 1 set. DC distribution system controls suitable operation depending on the status of the DC power distribution system and load. Integrated operation of these systems is verified by simulation and experiment results.

• Computers and Concrete
• /
• 제7권2호
• /
• pp.159-167
• /
• 2010

This paper demonstrates numerical techniques for complex large-scale modeling with microplane constitutive theories for reinforced high strength concrete, which for these applications, is defined to be around the 7000 psi (48 MPa) strength as frequently found in protective structural design. Applications involve highly impulsive loads, such as an explosive detonation or impact-penetration event. These capabilities were implemented into the authors' finite element code, ParaAble and the PRONTO 3D code from Sandia National Laboratories. All materials are explicitly modeled with eight-noded hexahedral elements. The concrete is modeled with a microplane constitutive theory, the reinforcing steel is modeled with the Johnson-Cook model, and the high explosive material is modeled with a JWL equation of state and a programmed burn model. Damage evolution, which can be used for erosion of elements and/or for post-analysis examination of damage, is extracted from the microplane predictions and computed by a modified Holmquist-Johnson-Cook approach that relates damage to levels of inelastic strain increment and pressure. Computation is performed with MPI on parallel processors. Several practical analyses demonstrate that large-scale analyses of this type can be reasonably run on large parallel computing systems.

• 품질경영학회지
• /
• 제17권2호
• /
• pp.149-157
• /
• 1989

A one-upper warehouse n-lower retailer inventory model is discussed. The probability distribution of demand for a given perod is independent. The inventory holding cost is proportional to the number of unsold units and the cost of shortages is proportional to the number of shortages. In the event of a shortage, units are redistributed with a cost proportional to the number of units from the retailers which are a surplus at the end of the period. The optimum stock levels are obtained and the effects of redistribution are analized.

• 한국전자통신학회논문지
• /
• 제16권3호
• /
• pp.401-406
• /
• 2021

최근 들어, 음향 이벤트 검출을 위하여 CRNN(: Convolutional Recurrent Neural Network) 구조에 기반 한 평균-교사 모델이 대표적으로 사용되고 있다. 평균-교사 모델은 두 개의 병렬 형태의 CRNN을 가진 구조이며, 이들의 출력들의 일치성을 학습 기준으로 사용함으로서 약-전사 레이블(label)과 비-전사 레이블 음향 데이터에 대해서도 효과적인 학습이 가능하다. 본 연구에서는 최신의 평균-교사 모델에 로그-멜 스펙트럼에 대한 차분 특징을 추가적으로 사용함으로서 보다 나은 성능을 이루고자 하였다. DCASE 2018/2019 Challenge Task 4용 학습 및 테스트 데이터를 이용한 음향 이벤트 검출 실험에서 제안된 차분특징을 이용한 평균-교사모델은 기존의 방식에 비해서 최대 8.1%의 상대적 ER(: Error Rate)의 향상을 얻을 수 있었다.

• 대기
• /
• 제15권1호
• /
• pp.35-46
• /
• 2005

Today, the outreach of National Meteorological Service such as PC cluster based Numerical Weather Prediction (NWP) technique is vigorous in the world wide. In this regard, WMO (World Meteorological Organization) asked KMA (Korea Meteorological Administration) to formulate a regional project, which cover most of RA II members, using similar technical system with KMA's. In that sense, Meteorological Research Institute (METRI) in KMA developed Mongolian NWP System (MNWPS) based on PC cluster and transferred the technology to Weather Service Center in Mongolia. The hybrid parallel algorithm and channel bonding technique were adopted to cut cost and showed 41% faster performance than single MPI (Message Passing Interface) approach. The cluster technique of Beowulf type was also adopted for convenient management and saving resources. The Linux based free operating system provide very cost effective solution for operating multi-nodes. Additionally, the GNU software provide many tools, utilities and applications for construction and management of a cluster. A flash flood event happened in Mongolia (2 September 2003) was selected for test run, and MNWPS successfully simulated the event with initial and boundary condition from Global Data Assimilation and Prediction System (GDAPS) of KMA. Now, the cluster based NWP System in Mongolia has been operated for local prediction around the region and provided various auxiliary charts.