• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.17-22
• /
• 2004

In this paper, we implement an efficient MLC/PDL system for AWGN channels. In terms of the tradeoff between the hardware implementation and system performance, proposed algebra LDPC codes are optimized by the Gaussian approximation(GA) according to the rate of each level assigned by the capacity rule and chosen as the component code. System performance with Ungerboeck Partitioning(UP), Miked Partitioning(MP) and Gray Mapping(GM) of 8PSK are evaluated, respectively. Many results are presented in this paper; they can indicate that the proposed MLC/PDL system using optimized algebra LDPC codes with different code rate, capacity rule and Gray mapping(GM) can achieve the best performance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.9
• /
• pp.788-795
• /
• 2004

Cooling characteristics of protruding heat sources in a parallel channel with or without baffles are studied experimentally, The test section consists of two channels formed by two covers and one board made of polycarbonate which has three uniform heat source blocks. Five different cooling methods are considered to find out the most efficient cooling method in a given geometry and heat sources. The velocity and temperature of cooling medium, the temperature of the block surface are measured. The results are compared to examine the cooling characteristics of the different cooling methods.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.97-98
• /
• 2006

Fusion of decisions from multiple distributed sensor nodes is studied in this work. Based on the canonical parallel fusion model, we derive the optimal likelihood ratio based fusion rule with the assumptions of the generalized Gaussian noise model and the arbitrary fading channel. This optimal fusion rule, however, requires the complete knowledge of the channels and the detection performance of local sensor nodes. To mitigate these requirements and to provide near optimum performance, we derive suboptimum fusion rules by using high and low signal-to-noise ratio (SNR) approximations to the optimal fusion rule. Performance evaluation is conducted through simulations.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1995.11a
• /
• pp.163-172
• /
• 1995

In this paper, the bit-level 1-dimensionl systolic array for modular multiplication are designed. First of all, the parallel algorithms and data dependence graphs from Walter's Iwamura's methods based on Montgomery Algorithm for modular multiplication are derived and compared. Since Walter's method has the smaller computational index points in data dependence graph than Iwamura's, it is selected as the base algorithm. By the systematic procedure for systolic array design, four 1-dimensional systolic arrays ale obtained and then are evaluated by various criteria. Modifying the array derived from 〔0,1〕 projection direction by adding a control logic and serializing the communication paths of data A, optimal 1-dimensional systolic array is designed. It has constant I/O channels for modular expandable and is good for fault tolerance due to unidirectional paths. And so, it is suitable for RSA Cryptosystem which deals with the large size and many consecutive message blocks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.237-243
• /
• 2002

This paper studies the channel estimation schemes of Time Division Duplex (TDD) Code Division Multiple Access (CDMA) system with a parallel interference canceller (PIC) in multi-path fading channels. furthermore, the effective interpolation method which maintains the flexibility of UTRA TDD mode is proposed. By Monte Carlo simulations, it is verified that the proposed interpolation method can be used in order to obtain the proper performance of a multi-stage PIC and in order to reduce the required Eb/No for a given bit error rate (BER).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1833-1841
• /
• 1996

Recently, by emerging of the ALE techniques that make it possible to providereliable communications link automatically, high frequency communiation is newly used as emergency communication and back-up for satellite communications. ALE signal is transmitted in burst, and the received signal is subject to distortions by detrimental multipath fading channels. In the case of that channel, the performance of ALE system is highly dependent upon that of synchronization techniques. In this paper, M-ary FSK signals are detected by a bank of bandpass filter, which is implemented using recusive DFT(Discrete Fourier Transform). Also an acquisition and trancking algorithm are designed uisng parallel structure and early-late-gate methods respectively. Finally, we verify the performance ofthe proposed synchronization algorithm by the computer simulation.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.74-81
• /
• 1997

Xcent-Net is a new system network designed to support a clustered SMP called SPAX(Scalable Parallel Architecture based on Xbar) that is being developed by ETRI. It is a duplicated hierarchical crossbar network to provide the connections among 16 clusters of 128 nodes. Xcent-Net is designed as a packet switched, virtual cut-through routed, point-to-point network. Variable length packets contain up to 64 bytes of data. The packets are transmitted via full duplexed, 32-bit wide channels using source synchronous transmission technique. Its plesiochronous clocking scheme eliminates the global clock distribution problem. Two level priority-based round-robin scheme is adopted to resolve the traffic congestion. Clear-to-send mechanism is used as a packet level flow control scheme. Most of functions are built in Xcent router, which is implemented as an ASIC. This paper describes the architecture and the functional features of Xcent-Net and discusses its implementation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.100-110
• /
• 1994

This paper proposes an efficient traceback method for parallel hardware implementation of the Viterbi algorithm. Compared to the conventional Viterbi algorithm where initial state for traceback is selected arbitrarily the proposed algorithm decides decoding output by analyzing the survivor paths of consecutive tracebacks. This makes Viterbi algorithm more efficient in error correction event when more than one survivor path exists. The proposed traceback algorithm together with its hardware realization is presented in this paper. Experimental results show tht the proposed algorithms is efficient in error correction in noisy channels compared to the existing algorithms.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.9
• /
• pp.62-69
• /
• 1996

In this paper, the bit-level 1-dimensional systolic array for modular multiplication is designed. First of all, the parallel algorithm and data dependence graph from walter's method based on montgomery algorithm suitable for array design for modular multiplication is derived. By the systematic procedure for systolic array design, four 1-dimensional systolic arrays are obtained and then are evaluated by various criteria. As it is modified the array which is derived form [0,1] projection direction by adding a control logic and it is serialized the communication paths of data A, optimal 1-dimensional systolic array is designed. It has constant I/O channels for expansile module and it is easy for fault tolerance due to unidirectional paths. It is suitable for RSA cryptosystem which deals iwth the large size and many consecutive message blocks.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.13-20
• /
• 2005

In this paper, a new multi carrier, direct sequence code division multiple access (MC-DS-CDMA) system is proposed. Our new signal construction is based on convolutional encoding of the transmitted data, serial-to-parallel (S/P) conversion of the encoded data, Walsh-Hadamard-transformation (WHT), a second S/P conversion of the WHT outputs, spread spectrum (SS) modulation with a common pseudo-noise (PN) sequence, and then multicarrier transmission. The system bit error rate (BER) performance in frequency selective fading channel in the presence of additive white Gaussian noise (AWGN) and a jamming tone is analyzed and simulated. The numerical results are compared with those from an orthogonal MC-DS-CDMA system of Sourour and Nakagawa [7]. It is shown that the two systems have almost the same BER performance, but the proposed scheme has better anti-jamming ability.