• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2013

Confectionary and food products were collected from Korea and Japan. Types of packaging structure, amount of packaging materials used, basis weight of paperboard, and product to packaging ratio were evaluated for understanding confectionery and food packaging in both countries. Also, new packaging samples were designed and fabricated for reducing the use of packaging resources and for optimizing the product to packaging ratio. Korean confectionary products showed much higher empty space inside package than that of Japanese products, while food products were not significantly different between tow countries. There were no significant differences in the basis weight of paperboard collected. All of the re-designed confectionary products showed more than 15% saving in packaging resource compared to current confectionary products.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.406-410
• /
• 1999

Squash(Cucurbita moschata) during 7 days of storage at 2$0^{\circ}C$ were packed with functional MA film laminated in corrugated paperboard box(FC), LDPE pouches and control, and weight loss, firmness, chlorophill contents, vitamin C and marketability was erluated. Weight loss of control was 5.8% after 7 days, and 30LD, 50LD was 0.4%, and FC was 1.2%. Firmness of FC, 30LD and 50LD was higher than that of control. Chlorophill content of squash between control and FC box was 46.43 and 53.66 $\mu\textrm{g}$/ml, that of FC box was 15.6% higher than control. Total ascorbic acid cpntent(TAA) of squash packed with control and FC box were 28.11 and 35.65mg%, TAA of squash packed with FC box was 26.8% higher than that of control. Marketability of squash packed with FC box was better than that of control.

• Composites Research
• /
• v.37 no.3
• /
• pp.143-149
• /
• 2024

This paper measures the mechanical properties of corrugated cardboard, an eco-friendly packaging material, and applies these measurements to the MAT_PAPER model in LS-DYNA for finite element analysis. Although MAT_PAPER is primarily designed for modeling the behavior of paper, this research demonstrates its applicability to corrugated cardboard as well. Tensile, compression, and shear behaviors of a corrugated cardboard were measured and analyzed, and based on these results, six yield surfaces were derived and integrated into the MAT_PAPER model. By comparing the finite element analysis of the material tests and the low velocity collapse analysis of the corrugated cardboard square boxes with each experimental results, it was shown that the behavior of corrugated cardboard could be equivalently considered well by the MAT_PAPER model. However, since the model is not rate-dependent, the high strain rate properties of liner materials were measured and used for strain rate correction. Consequently, this matches well with the results of the high-speed compression tests of the corrugated cardboard square boxes.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.1
• /
• pp.7-12
• /
• 2003

The test results for water repellency of paper and paperboard according to KS M 7057 can readily be influenced by an operator's bias. In order to discard such bias, the automatic analysis program of water repellency was developed based on different shape features of a liquid trace formed on a specimen. That is, the shape of a liquid track flowing down on the specimen with an angle of $45^{\circ}$ was evaluated according to width variation between head and tail of the trace($S_{Hr}$), uniformity of a liquid flow($S_{d}$), length of long traces($L_{SHr}$), eccentricity of liquid traces($E_{i}$), and then was recognized as a specific degree of water repellency. Finally, the automatic analysis system of water repellency based upon KS M 7057 made it possible to readily measure water resistance of paper and paperboards classified into R0 to R10.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.11-22
• /
• 2011

Jeonji technique was widely used in general Hanji handicraft including Jihwa handicraft. But the technique itself has not been passed on. By contrast, Jiseung technique and Jiho technique have been passed on and continuously developed. And although the Huji technique has not been transmitted, it should be vigorously used as a technique of producing the frame in order to revive the authenticity of traditional Hanji handicraft. Jumchi technique, a method of using water to connect between layers, is an effective technique of diversely expressing the feel of materials of Hanji craftworks. Modern Hanji handicraft has used the characteristics of paper and paperboard diversely produced nowadays as much as possible, which shows that it is more likely to develop as handicraft.

• Corrugated packaging logistics
• /
• s.77
• /
• pp.95-101
• /
• 2008

이 매뉴얼에는 놀라운 기술적 비밀 또는 특허가 될 만한 정보가 있는 것은 아니다. 대부분의 정보는 골판지 산업계 내에서 수십년 동안 존재해왔던 것들이다. 이 메뉴얼은 단지 현재 존재하고 있는 이런 정보들을 군에서 사용되는 유지관리 시스템에 맞추어 하나의 논리적인 형식으로 압축한 것에 지나지 않는다. 하지만 이 매뉴얼이 나오기 까지 물신양면으로 도움을 주신 몇몇 분들에게 감사를 전하고자 한다. 첫 번째로 미육군에 감사하고 싶다. 유지관리 초년장교로서 나는 심지어 가장 오래된 골동품인 1959년형 2.5톤 트럭조차도 수 십년간 최적의 수준으로 달리게 만드는 미육군의 매우 조직적이고 단순한 유지관리 시스템을 보고 매우 놀랐었다. 이 매뉴얼 안에 있는 조직적인 틀은 그러한 경험의 산물이다. 나에게 많은 훈련을 시켜 주었고 정보를 준 웨스트베코사(Westvaco Corporation)의 짐버트(Jim Burt)에게 감사하지 않을 수 없다. 이 책에 소개되어 있고 현재 골판지 산업계에서 사용되는 조정에 관한 대부분의 정보는 스톤 컨테이너사(Stone container corporation)의 던드래쥐(Don Drage)의 공이 크다. 이외의 정보는 종이판지 포장잡지(Paperboard packaging magazine)의 에드릴레이(Ed Riley)와 같은 지도자에 의해 쓰여진 기사들에서 얻어진 것이다. L.A. 사우어사(L.A. Saur Corporation)와 같은 장비와 부품회사들 또한 그들 전문분야에서의 가장 최신의 정보를 제공해 주었음을 밝히는 바이다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.16 no.1
• /
• pp.5-7
• /
• 2010

Two kinds of polymer coating (acrylic polymer and vinyl acetate ethylene copolymer) added with 5% nisin were fabricated on the paperboards and tested in their antimicrobial activity against Micrococcus flavus ATCC 10240 inoculated into water contacting the coating at $10^{\circ}C$. Vinyl acetate ethylene copolymer giving faster and higher nisin migration presented the greater reduction in the microbial count than the other coating, which endorsed that the migrated nisin is mainly responsible for the microbial inhibition or destruction. There was also a slight effect of the coating polymer itself in the microbial inhibition.

• Corrugated packaging logistics
• /
• s.78
• /
• pp.83-89
• /
• 2008

이 매뉴얼에는 놀라운 기술적 비밀 또는 특허가 될 만한 정보가 있는 것은 아니다. 대부분의 정보는 골판지 산업계 내에서 수십년 동안 존재해왔던 것들이다. 이 메뉴얼은 단지 현재 존재하고 있는 이런 정보들을 군에서 사용되는 유지관리 시스템에 맞추어 하나의 논리적인 형식으로 압축한 것에 지나지 않는다. 하지만 이 매뉴얼이 나오기 까지 물신양면으로 도움을 주신 몇몇 분들에게 감사를 전하고자 한다. 첫 번째로 미육군에 감사하고 싶다. 유지관리 초년장교로서 나는 심지어 가장 오래된 골동품인 1959년형 2.5톤 트럭조차도 수 십년간 최적의 수준으로 달리게 만드는 미육군의 매우 조직적이고 단순한 유지관리 시스템을 보고 매우 놀랐었다. 이 매뉴얼 안에 있는 조직적인 틀은 그러한 경험의 산물이다. 나에게 많은 훈련을 시켜 주었고 정보를 준 웨스트베코사(Westvaco Corporation)의 짐버트(Jim Burt)에게 감사하지 않을 수 없다. 이 책에 소개되어 있고 현재 골판지 산업계에서 사용되는 조정에 관한 대부분의 정보는 스톤 컨테이너사(Stone container corporation)의 던드래쥐(Don Drage)의 공이 크다. 이외의 정보는 종이판지 포장잡지(Paperboard packaging magazine)의 에드릴레이(Ed Riley)와 같은 지도자에 의해 쓰여진 기사들에서 얻어진 것이다. L.A. 사우어사(L.A. Saur Corporation)와 같은 장비와 부품회사들 또한 그들 전문분야에서의 가장 최신의 정보를 제공해 주었음을 밝히는 바이다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.3 no.2
• /
• pp.33-42
• /
• 1996

The portion of the recycled paper and paper board packaging material has been the highest in recycled municipal solid waste since 1960 but still the portion of the discarded paper and paper board packaging material is the highest (32.3%) in whole discarded municipal solid waste in USA. In order to reduce more the discarded paper and paper board, the common municipal solid waste treatments were compared and recycling treatment was still recommended for the the discarded paper and paper board rather than of the waste treatments, landfill, incineration, and source reduction. In this paper, the obstacled of recycling treatment of the paper and paper board in municipal solid waste and new application of recycled paper and paper board packaging material are discussed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.34-40
• /
• 2014

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers and the old corrugated container (OCC) furnish were refined, and mixed together to form paperboard. At optimum mixing ratios and refining degrees, stiffness and tensile strength of the MDF fiber-containing board were higher than those of the board with 100% OCC. It was found that there was possibility to reduced basis weight of the filler layer down to 90% of the all OCC furnish by judicious selection of the mixing ratio and the refining method of the MDF fibers. Drainage rate increase and potential drying energy savings were additional benefits.