• 펄프종이기술
• /
• 제47권1호
• /
• pp.52-58
• /
• 2015

White ledger usually includes white office paper, computer paper, and copy machine paper. Because these grades need high optical properties, fluorescent whitening agents (FWAs) are widely used in the papermaking process. FWAs are the most powerful and effective chemical used to obtain high CIE whiteness and ISO brightness in papers. The rising demand for white or ultra-white papers has increased the use of FWAs. However, FWAs used in white ledger can restrict its use, even though white ledger is widely used as a raw material in paperboard mills. Therefore, it is necessary to develop methods to control FWAs from white ledger to increase its use in paperboard mills. In this study, the behaviors of disulpho fluorescent whitening agent (D-FWA), tetrasulpo fluorescent whitening agent (T-FWA), and hexasulpho fluorescent whitening agent (H-FWA) during the recycling process were identified as a first step to remove FWAs from white ledger. We prepared four types of papers (dyed with D-FWA, T-FWA, and H-FWA), disintegrated these papers, and made handsheets. This recycling process was carried out three times in a laboratory. After each round of recycling, the hand-sheets' CIE whiteness and fluorescence index were measured, and the distribution of FWAs in the Z-direction was observed using CLSM images. FWA reductions in the model papers were calculated using fluorescence indices as a function of the number of recycling. FWAs in handsheets containing T-FWA and H-FWA decreased linearly as a function of the number of recycling, but D-FWA did not show a significant reduction in the fluorescence index after recycling. T-FWA and H-FWA showed similar distributions of D-FWA after recycling. Therefore, as much T-FWA and H-FWA as possible must be detached in the early processes of papermaking at paperboard mills.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.377-386
• /
• 2010

Introduction of TBELs into Korean environmental regulatory system for wastewater may require very careful considerations and appropriate modifications of the TBELs applied in US. The Korean regulations for wastewater are based on uniform regulatory criteria for wastewater effluent discharge and are quite different from the individual permit system in US. In addition, the toxic pollutants regulated in Korea are much less than those in US. Therefore, the effects of TBELs application on the pollutants reduction and the economic feasibility should be carefully assessed for different categories of wastewater sources. In this study, the applicability of TBELs for the industrial categories of Korea was discussed. The TBELs were derived for a sample category, the pulp paper paperboard manufacture, based on the previously reported analytical data from 52 facilities of the domestic pulp paper paperboard manufacture in Korea. It was suggested that the BAT effluent limitations were BOD 30 mg/L, $COD_{Mn}$ 40 mg/L, SS 40 mg/L, T-N 30 mg/L and T-P 4 mg/L and that the allowable effluent loads were $0.31{\sim}1.75kgCOD_{Mn}/ton$-products. Due to the limitation of insufficient data, there were difficult to obtain the important factors to derive more systematic and accurate limitation standards for the pollutants such as the 'Long Term Average (LTA)', the 'Product Normalized Discharge Flow (PNDF)', and the 'Variability Factor (VF)'. However, as the first trial of TBELs determination based on the all available analytical data reported, the procedure and the outcome of the study may provide valuable insight on application of TBELs in Korea.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.192-198
• /
• 2007

• 펄프종이기술
• /
• 제39권3호
• /
• pp.1-11
• /
• 2007

To evaluate the quality of waste paper used for the manufacture of linerboard, the types of papers and foreign materials in compressed waste paper currently used were investigated. The recycled fibers were obtained from printing paper, newspaper, wrapping paper, white coated paperboard and corrugated container. Their fibers were observed by using a microscope, and the mechanical properties of the recycled papers manufactured from the recycled fibers were investigated. The compressed wastepaper was composed of 54% paperboard, 20% printing paper, and 20% newsprint. The content of foreign materials was about 4%, showing higher contents compared to 1% of foreign substances provided by Korea paper manufacturers' association. The types of foreign materials were various, which include vinyls, plastics, metals, woods, styrofoams, and cloths. Sound fibers were generally observed in the recycled fibers of printing papers and wrapping paper. The recycled fibers of white coated board, corrugated container and newsprint showed to be generally damaged. The whiteness of each recycled fiber were highly affected by pulp bleaching and ink-particle mixing conditions. The values of breaking length and burst index were lower than those for corrugating medium and liner board specified in KS. Although the anatomical characteristics of recycled fibers varied, their strengths appeared to be similar. This result may be explained by the use of non-deinked fiber.

• 한국포장학회지
• /
• 제7권2호
• /
• pp.1-5
• /
• 2001

기능성 MA필름을 생산하여 이를 골판지 상자의 내부에 첨합시킨 FC상자의 활용가능성을 조사하고자 골판지 상자와 기능성 MA필름을 골판지 상자 내부의 1면당 5곳씩 첨합시킨 FC포장구와 LDPE 및 기능성필름으로 토마토를 포장하여 $25^{\circ}C$에 저장하여 품질변화를 조사한 결과, FC 상자와 LD와 CE 포장구는 대조구 보다는 중량감소율이 현저히 낮았으며 비타민 C의 함량도 14% 높게 유지되고 있었다. 산도는 포장구들간에는 큰 차이가 없었고 당도는 FC 포장구 보다 대조구에서 19% 더 높아 그만큼 품질 변화가 일어난 것으로 판단되었다. 외관 및 부패를 조사한 결과 대조구에 비해 개발 포장구에서 품질이 더 높게 유지되고 있어 FC 포장재를 토마토 포장용 상자로 활용 가능성이 확인되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.251-253
• /
• 2011

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 춘계학술대회
• /
• pp.282-289
• /
• 2008

• 한국포장학회지
• /
• 제8권2호
• /
• pp.27-31
• /
• 2002

제주산 감귤을 기존의 골판지와 이골판지에 특성이 다른 선도 유지기능성 소재 3종을 상자 내면에 코팅하여 여기에 감귤을 넣고 $25^{\circ}C$에 8일간 저장하면서 선도 유지효과를 조사하였다. 중량은 모든 포장구에서 2.6-3.7%가 감소하였고 산도와 당도는 포장구간에 차가 없었으며 비타민 C 함량은 대조구 보다 R-Box와 Y-Box가 10% 높게 유지되고 있었다. 부패율도 R-Box는 4%였으나 나머지 포장구는 8-11%의 감귤이 부패되었으며 외관도 R-Box가 가장 양호하였다.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.83-91
• /
• 2020

The evaluation of the compression behavior of the cushioning material is of importance to achieve appropriate packaging design. In order to change packaging design from polymeric-based to more eco-friendly cellulose-based nire effectively, comparative study on the compression behavior between these two packaging materials is crucial. In this study, the stress-strain behavior, hysteresis loss, and response characteristics for cyclic loading were analyzed through compression tests on multi-layered corrugated structure (MLCS) and expanded polystyrene (EPS) packaging materials. MLCS produced in Korea is produced by winding a certain number of single-faced corrugated paperboard, and the compression behavior of this material was turned out to be 6 stages: elastic stage, first buckling stage, sub-buckling stage, densification stage, last buckling stage and high densification stage. On the other hand, EPS's compression behavior was in 3 stages: linear elastic stage, collapse plateau, and densification stage. The strain energy per unit volume (strain energy density) of MLCS did not differ depending on the material thickness, but it showed a clear difference depending on the raw material and flute type. Hysteresis loss of MLCS ranged from 0.90 to 0.93, and there were no significant differences in the raw material and flute type. These values were about 5 to 20% greater than the hysteresis of the EPS (about 0.78 to 0.87).

• 한국식품영양과학회지
• /
• 제29권1호
• /
• pp.80-84
• /
• 2000

기능성 필름을 코팅한 골판지 상자에 사과를 저장하면서 품질유지 상태를 조사하고자 대조구로 기존에 유통 중인 골판지 상자와 두께 0.03, 0.05 mm의 LDPE필름(30LD와 50LD)과, 두께 0.03 mm, 0.05 mm의 기능성MA 필름을 골판지 상자에 코팅한(30CE와 50CE) 후 이 상자에 후지사과를 15 kg씩 포장하여 $5^{\circ}C$에 75일간 저장하면서 신선도 변화를 비교 연구하였다. 중량 감소는 저장 75일 후 대조구는 2.7%, LD와 CE 포장구들은 0.2~0.5% 감소했다. 경도는 대조구보다는 필름포장구들에서 변화가 적었고 LD보다는 CE 포장구에서 변화가 더 적게 나타났다. 비타민 C 함량은 초기의 3.67 mg%에서 대조구는 42%, LD 포장구들은 31~29%, CE 포장구들은 24~22%가 감소하였다. 산도 및 가용성 고형분의 경우 대조구가 필름포장구들에서 변화가 심했으며, 필름포장구들 중에서는 LD 포장구보다 CE 포장구에서 변화가 적게 나타났으며, 부패도 대조구보다는 LD와 CE 포장구에서 적게 나타났다.