• 한국인쇄학회지
• /
• 제15권1호
• /
• pp.17-30
• /
• 1997

In this work, we have investigated the printability such as print through and str-off of domestic newspapers. Nine kinds of domestic newspapers Hansol, Deahan, Sinho, Hanla and Sepung, were tested by IGT printability tester, and studied using maximum ink requirement method. We obtained the datum of printability parameters such as maximum ink requirment of paper Ymax, printing density D, print through, set-off and gloss. The results of this test showed that a choice of the fillers on the newspaper had an effect on print through, set-off and density of newspapers in the maximum ink transfer point.

• Journal of Forest and Environmental Science
• /
• 제18권1호
• /
• pp.97-105
• /
• 2001

The main objective of this study was to investigate effects of pigment mixed with different ratio on the double coated paper. Mineral pigments such as clay and ground calcium carbonate(GCC) as well as hollow sphere plastic pigment were used to evaluate the physical, optical properties and printabilities of double coated paper. The physical properties such as gloss and smoothness, and the printability(ink gloss) of double coated paper were measured to evaluate the effects of the bottom layer on improving the properties of top layer. The data indicated that the usage of hollow sphere plastic pigment for the bottom layer coating improved the surface properties of double coated paper, and that ink gloss was significantly influenced by the structure of bottom layer even when hollow sphere plastic pigment was used for the bottom layer coating.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 춘계학술대회
• /
• pp.129-134
• /
• 2008

Properties of newly developed paper from Red Algae Pulp (RAP) were examined. The paper samples were prepared by mixing RAP fiber with wood fibers, HwBKP and SwBKP, to form a paper with $60g/m^2$ in weight. It was prepared in three to four different levels of refining degree and pressure so that it can reveal different bulk level in order to clearly compare the opacity at equivalent bulk for each furnish compositions. Printability of RAP fiber revealed superior effect on print through repression and initial ink absorption. Those properties are expected to improve further if printability improvement effect due to smoothness improvement is added.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.41-45
• /
• 2010

This study was performed to evaluate the effect of paper property changes by internal addition of surface strength agent on printability. Advances in printing technique has required the development of paper qualities in many aspects. Basically paper structure is composed of hydrogen bonds which induce many problems in high speed printing machine because of weak bonding strength. One of the important printing problems is surface picking when mechanical pulp or recycled pulp are used. It was caused by the ink-stained blanket in printing process because accumulations of pollutant in white water and other elements which are bonded weakly or do not have hydrogen bonds. Debris at paper surface adheres to blanket which deteriorates printing efficiency and causes various problems. To complement these problems, Pennocel 5137 of polysaccharide structure was used as an agent to improve paper's surface property, strength and printability. Paper surface picking was analyzed by RI-1 test. As the dosage amount increased tensile strength, fiber bonding strength and ZDT strength were improved. Further more formation, smoothness and surface picking resistance were improved. It was confirmed that when adding polysaccharide structure polymers to improve surface strength such as surface picking resistance, it was also possible to improve tensile strength, fiber bonding strength, formation and smoothness.

• 한국인쇄학회지
• /
• 제19권2호
• /
• pp.1-11
• /
• 2001

As for the sheet fed offset printing machine, the research and development of the speedup and multi-color for little rod are done. A charge per one offset printing machine became high year, and all kinds of control device became attach. Under this situation to need, many studies of printability of paper and ink are done. In particular improvement of surface strength of printing paper with speedup is needed. The use of non-wood paper and soybean printing paper with speedup is needed. The use of non-wood paper and soybean printing ink had been increased, study of those printability are important for printing development. From the viewpoint of quality and print important for printing development. From the viewpoint of quality and print productivity, the digital printing machine became lo on the introduction in Japan for the present.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.352-358
• /
• 2019

최근 인쇄용지는 단순히 정보 전달의 기능을 넘어서 미적, 예술적 가치가 부가면서 고품질의 인쇄가 가능한 도공지(coated paper)에 대한 시장의 수요가 증가하고 있다. 특히 실사급 고품질의 인쇄가 가능한 잉크젯 프린팅의 도공지는 잉크의 인쇄적성을 향상시키기 위하여 표면에 젖음성(wettability)과 다공성 구조(porous structure)를 갖는 도공층의 역할이 매우 중요하다. 본 연구에서는 나노 실리카 졸 입자에 실란 커플링제로 표면처리하고 수용성 결합제인 폴리비닐알콜(PVA)와 혼합하여 도공액(coating color)를 제조하고 원지(base paper)에 코팅하여 도공층을 제조하였다. 실란 커플링제로 표면처리한 나노 실리카 도공층은 표면처리하지 않은 도공층과 비교하여 균일한 기공 분포 및 평탄한 표면 거칠기를 가지며, 판매용 고급 인화지와 유사한 광택도를 갖는 것을 확인하였다. 특히 잉크의 망점(dot)에 대한 진원도로 평가하는 인쇄적성 평가 결과 실란 커플링제로 표면처리한 도공지는 다층 구조의 도공층을 갖는 판매용 고급 인화지보다 더 우수한 결과를 얻을 수 있었다. 이러한 결과는 실란 커플링제 표면처리를 통하여 나노 실리카 입자의 분산성이 향상되어 우수한 젖음성과 균일한 기공 분포를 갖는 도공층 형성이 가능하였기 때문으로 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.73-81
• /
• 1999

가장 보편적으로 사용되고 있는 도공용 안료인 클레이와 탄산칼슘의 배합비율을 실제 도공공정의 안료 혼합비와 근사하게 설정한 후, 이온성 라텍스를 적용해 봄으로서 이들의 상호작용과 도공지의 품질에 미치는 영향에 대해 검토해 보았다. 1,2급 클레이를 각각 35부, 탄산칼슘을 30부씩 혼합한 후, 제조한 도공액의 탈수량 및 침강중량비 측정 결과, 양성라텍스는 음이온성 라텍스보다 다분산 안료 배합하에서도 안료와의 상호작용이 크다는 것을 알 수 있었으며, 형성된 필터케이크충의 구조가 다공성임을 알 수 있었다. 이러한 결과는 제조한 도공지의 표면거칠기 및 투기도 등의 도공지 표면 및 내부육특성 측정을 통해 확인할 수 있었다. 결과적으로 양성라텍스를 사용하여 제조한 도공지의 인쇄적 성이 음이온성 라텍스를 사용한 경우보다 우수하였다. 이는 양성라텍스가 탄산칼슘이 일정비율 첨가된 안료 배합조건 하에서도 이오기의 전하반전 특성을 통해 클레이와의 정전기적 상호작용을 할 수 있다는 사실을 보여주었으며, 1급 클레이의 혼합비율 일부를 2급 및 탄산칼슘으로 대체하여 도공지의 품질 및 인쇄적성을 개량하였다.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.70-77
• /
• 2005

The development of printable Hanji is regarded as an important work to create a new demand of Hanji in information-oriented era. Hanji has rougher surface, huger absorption of ink and lower optical properties and printabilities than common printing papers. Improving those shortcomings of Hanji is required to be printable Hanji. Sizing and calendering have known as a way to make properties of paper good. Accordingly, this research was performed to find out useful sizing agents for reforming its drawbacks. Four sizing agents (CMC, com starch, PVA, AKD) were used in this research. The optical properties and the printabilities of sized Hanji were tested. The obtained results were as follows. Based on concentration, each sizing agent was prepared. These were CMC(0.5, 1, $1.5\%$), corn starch(1, 2, $3\%$), PVA(1, 5, $10\%$), AKD(0.5, 0.1, $0.15\%$) respectively. After sizing, we performed calendering treatment with pressure of 0.5, $1\;kgf/cm^2$. All the sizing agents and calendering treatment improved the properties of Hanji to some extent. Particularly, com starch was good for gloss. In case of printability, $1\%$ AKD with $1\;kgf/cm^2$ was recommendable for typography ink density, $3\%$ com starch with $0.5\;kgf/cm^2$, inkjet ink density, $2\%$ com starch with $0.5\;kgf/cm^2$, inkjet ink girth. PVA and AKD without calendering were counter-effective agents for inkjet ink density. Printable Hanji is required to have not only better surface strength enough to appear non-picking, higher ink density and lower show-through than base paper but also the lowest ink girth in comparison with base paper. When referring to them, efficient sizing agents were regarded as $0.1\%$ AKD with $1\;kgf/cm^2$, calender pressure, for typography printing and $2\%$ com starch with $0.5\;kgf/cm^2$, calender pressure, for inkjet printing.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.41-46
• /
• 2006

Printed mottle of coated paper is one of the most common but the most difficult problem in offset printing. Printed mottle is caused by an uneven penetration of Ink into the paper, binder migration, etc. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. So for, the study of solving printed mottle is coated paper absorption controlled by base paper sizing and coating layer binder migration control. As a results, printed mottle has improved in coated paper. But printing is worked by interaction of printing ink, coated paper and printing pressure, then we need to understand of interaction printing work and coated paper. This research focused on a way of improving printed mottle by investigating various printing conditions such as ink dispersion, nip condition and amount of ink transfer using IGT printability tester.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2005년도 춘계학술발표논문집
• /
• pp.147-161
• /
• 2005