• 펄프종이기술
• /
• 제45권6호
• /
• pp.64-71
• /
• 2013

The biodegradable mulching paper could be applied for the environmental friendly agriculture as an alternative to the current vinyl mulching. In order to increase the usability of the mulching paper, the effects of the addition of various inorganic materials on the functionality of the mulching paper were evaluated in terms of practical benefits. The blend of carbonized rice husk powder and perlite resulted in the higher value in the air permeability of the mulching paper, which would be important for the health of plant root. The heat conservative of the mulching paper could be improved by adding the bottom ash or the fly ash because of the pore structure of the ashes. The pH of acidic soil could be neutralized by using the mulching paper containing paper-mill sludge ash or fly ash. The various results showed the addition of the inorganic materials could improve the functional properties of the mulching paper.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.37-43
• /
• 2009

In this study, the physical properties of base paper for the manufacture of mulching mat for afforestation seedling were investigated. The base paper for mulching mat was prepared by stock conditions of PAE and AKD addition into the screened slurry of KOCC for the strengthening effects of wet tensile and burst strength. The optimum additions of PAE and AKD were considered at 2% and 0.5%, respectively. The accelerated aging by ISO 5630-1 and wet heat aging method under hot water for 2 kinds of commercial mulching and wet strength paper were compared with the base paper prepared for mulching mat manufacture. The accelerated aging test for the base paper prepared for mulching mat manufacture resulted in the same tendency of physical properties as two kinds of commercial products. However, the results of wet heat aging test under hot water indicated that the physical strength for base paper prepared was much higher than others. In addition, the opacity behavior for base paper prepared was enough effects to obstruct weeds growth by isolating transmission of sunlight.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.49-56
• /
• 2011

Mulching technique is used to control the temperature and moisture content of soil by covering the ground surface. Most kinds of mulching film are made of polyethylene which is non-biodegradable synthetic polymer. Utilizing these films has been one of the main sources in soil pollution. Thus residual films under the ground should be removed after a certain period of time. Therefore, an alternative mulching material made of biodegradable functional paper is considered instead of non-biodegradable films. The mulching sheet produced from paper basis has a functionality to be naturally degraded and then recycled to the bio-materials on soil. In this study, the paper based-mulching sheet coated with biodegradable polymer was specially produced using a laboratory bar coater. Coating colors prepared by dissolving PBS/PLA in chloroform were applied to kraft paper. The mechanical strength and aging properties of this mulching sheet were investigated. The burst strength of polymer-coated paper was decreased with the increase of the PBS ratio in PBS/PLA blends, and, in particular, 30/70 blending condition led to good stability in heat-aging atmosphere for 60 days.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.85-92
• /
• 2014

The disposal of the paper mill sludge and the paper mill sludge ash become more important issue, because the environment regulation becomes more strict. In this study, the new mulching system was developed by using the paper sludge ash. The soil surface hardening mechanism for mulching with paper sludge ash, red clay and coal ash was evaluated. Since the CaO in the paper sludge ash provided the harden structure with water, the surface hardening mulching structure could cover the field surface and prevent the germination of weeds. More than 50 w.t.% of red clay and 10 w.t.% of paper sludge ash were required to create the solid soil surface structure for mulching. The field test with the new soil surface hardening mulching system for three months showed the generation of weeds could successfully be inhibited by the system.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.75-81
• /
• 2010

Characteristics of mixing biodegradable polymers and polymer impregnated paper for mulching mat for seedling were investigated. The mixed film of 70% PLA was most easily biodegradable. The surface of polymer films were changed to more rough due to enzymatic degradation of lipase. Tensile strength and breaking elongation of PLA mixed films were increased to the 0.04-0.31 kN/m and the 0.17-0.96%, respectively. With higher PLA contents, intensities of ester originated carboxyl group(about $1,748cm^{-1}$) were increased. Physical properties of prepared mulching mats were increased with PLA contents and stiffness of mulching mat was not so much changed.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.54-63
• /
• 2010

Recently, as the function of largest supplier of biomass for "low carbon green growth", the necessity for systematic management of afforestation areas is emphasizing. The forestation of seedling, besides the afforestation cost itself, is required some additional follow-up management costs, like mowing and fertilizing of forestation area, and removal of bindweed. The mulching mat for afforestation seedlings is available for rooting of little seedlings as well as initial forestation expenses. Mulching technique is also used to control soil temperature and moisture by covering the surface of ground. In this study, the paper based-mulching film coated with biodegradable polymer and functional additive was specially produced using laboratory bar coater, and analyzed for its degradable behavior. Coating colors were prepared by dissolving PE (polyester) 80 % and PLA(polylactic acid) 20 % in chloroform and finally applied to handsheet prepared by preceding study conditions. Base paper and polymer-coated paper were artificially aged by 2 kinds of degradation methods, which are soil degradation by microorganism and light degradation by 257 nm UV wavelengths. Strength property, oxidation index and morphological property were evaluated by reduction rates of tensile strength, FTIR spectra ratio of carboxyl and carbonyl group and SEM micrograph. As these results, polymer coated-paper was superior to base paper in degradation behaviors, having results with lower reduction rate of strength properties.

• 한국작물학회지
• /
• 제47권1호
• /
• pp.68-73
• /
• 2002

High temperature during sprout emergence period of potato (Solanum tuberosum L.) is a major limitation to the yield of fall-grown potato in Korea. To explore the possibility of improving the yield of fall-grown potato through recycled paper mulching, the changes of soil environment and the growth and yield of potato cv. Daeji as affected by three mulching treatments of non-mulched control, recycled paper mulching (RPM), and black polyethylene film-mulching (BPFM) were examined over two fall seasons at Suwon, Korea. The mulching materials were a recycled mulch paper with 110 g/$m^2$ and a thickness of 0.1 mm, which was manufactured from old corrugated containers for this experiment and a commercial black polyethylene film with a thickness of 0.01mm. On an average throughout the growing period, the soil temperature with RPM at the 5-cm depth was lower by 0.4-1.1$^{\circ}C$ than that of the control. The maximum temperature during daytime in RPM was lowered by approximately 1 to 5$^{\circ}C$ according to the weather condition during emergence period, the difference being great on a fine day. The soil temperature with BPFM was much higher than the control. The effect of the mulching treatments diminished as the canopy became developed. The mulching treatments were more advantageous than the control in the conservation of soil water. Moreover, RPM and BPFM efficiently suppressed the occurrence of weeds until the potato harvest. RPM improved the emergence significantly due to lower soil temperature, whereas BPFM showed much poorer emergence than the control. Growth after emergence and yield were significantly higher in RPM than in the control and BPFM. It was concluded that the significantly improved yield in RPM compared to that in the control was mainly due to the improvement of the sprout emergence and tuber growth accompanied by lower soil temperature and better conservation of soil water.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.37-42
• /
• 2009

This paper describes the fuel oil characteristics of mulching waste vinyl by indirect heating emulsion system. For the emulsion experiment of waste vinyl, the system is composed of melting furnace, the 1th pyrolysis furnace, and the 2nd pyrolysis furnace. The mulching waste vinyl is used for the fuel oil characteristics analysis of mulching waste vinyl. The refined oil, gasoline, and diesel oil are extracted and quantified to analysis the fuel oil characteristics. From the results of experiments, it has been shown that the production of fuel oil from mulching waste vinyl is possible using the emulsion system.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.8-14
• /
• 2009

Characteristics of biodegradable polymers for mulching mat for seedling were investigated. The solvent solubility of polymers is highest in methylene chloride and chloroform. Tensile strength and breaking elongation of polymer dipped paper were increased to the 0.43-1.46 kN/m and the 0.03-0.26%, respectively. PLAs had showed lower glass transition temperature and melting point than those of polyester. As a result, PLA should be most suitable polymer for mulching mat manufacturing. After biodegradation of polymers by lipase, surface of polymers was change to more flat due to enzymatic degradation.

• 한국유기농업학회지
• /
• 제17권4호
• /
• pp.501-517
• /
• 2009

노지재배 케일의 재배 포장 조건과 재배 작기에 따른 멀칭재료와 제초방법이 케일의 생육과 잡초 발생에 미치는 영향을 구명하고자 재배 포장은 밭토양과 논토양에서 수행하고, 재배 작기는 봄 작형과 가을 작형에서 수행하였다. 밭토양에서의 가을재배 작형의 멀칭재료에 따른 지온은 멀칭처리가 $0.9{\sim}2.0^{\circ}C$ 높았다. 잡초 방제가는 멀칭종이 처리가 91% 이상이었고, 멀칭재료와 제초방법에 따른 잡초 방제시간은 멀칭종이+기계제초 처리가 무멀칭+손제초 대비 70% 절감되었으며, 케일의 수량은 관행재배와 비슷하였다. 밭토양에서의 봄재배 작형의 종이멀칭 처리는 기온이 비교적 낮은 4월은 무멀칭대비 지온이 높았고 온도가 높아지는 5월과 6월에는 낮았다. 우점잡초는 명아주가 우점 하였으며, 잡초 방제가는 멀칭종이 처리가 52% 이상이었고, 멀칭재료와 제초방법에 따른 잡초 방제 시간은 멀칭종이+기계제초 처리가 무멀칭+손제초 대비 75% 절감되었으며, 케일의 수량은 관행재배대비 34% 증수되었다. 논토양에서의 봄재배 작형의 우점잡초는 둑새풀이 우점 하였으며, 잡초 방제가는 멀칭종이 처리가 43% 이었고, 멀칭재료와 제초방법에 따른 잡초 방제시간은 멀칭종이+기계제초처리가 무멀칭+손제초 대비 80% 절감되었으며, 케일의 수량은 관행재배대비 26% 증수되었다.