• The Journal of Society for e-Business Studies
• /
• v.23 no.3
• /
• pp.33-49
• /
• 2018

The importance of convergence activities among business is increasing due to the necessity of designing and developing new products to satisfy various customers' needs. In particular, decision makers such as CEOs are required to participate in networks between entrepreneurs for being connected with valuable convergence partners. Moreover, it is important for entrepreneurs not only to make a large number of network connections, but also to understand the networking relationship with entrepreneurs with similar topic information. However, there is a difficult limit in collecting the topic information that can show the lack of current status of business and the technology and characteristics of entrepreneur in industry sector. In this paper, we solve these problems through the topic extraction method and analyze the business network in three aspects. Specifically, there are C, S, T-Layer models, and each model analyzes amount of entrepreneurs relationship, network centrality, and topic similarity. As a result of experiments using real data, entrepreneur need to activate network by connecting high centrality entrepreneur when the corporate relationship is low. In addition, we confirmed through experiments that there is a need to activate the topic-based network when topic similarity is low between entrepreneurs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.8-15
• /
• 2019

The PM synchronous motor drives with vector control have been applied to wide fields of industry applications due to its high efficiency. The rotor position information for vector control of a PM synchronous motor is detected from the rotor position sensors or rotor position estimators. The sensorless control based on the mathematical model of PM synchronous motor is generally used and it can be classified into back EMF -based sensorless control and magnet flux-based sensorless control. The rotor position estimating performance of the back EMF-based sensorless control is deteriorated at low speeds since the magnitude of back EMF is proportional to the motor speed. The magnitude of the magnet flux for estimating rotor position in the flux-based sensorless control is independent on the motor speed so that the estimating performance is excellent for wide speed ranges. However, the estimation performance of the model-based sensorless control may be influenced by the motor parameter variation since the rotor position estimator uses the mathematical model of the PM synchronous motor. In this paper, the rotor position estimation performance for the back EMF based- and flux-based sensorless controls is analyzed theoretically and is compared through the simulation and experiment when the motor parameters including stator resistance and inductance are varied.

• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.212-220
• /
• 2018

As increase the number of vehicles, the issue of greenhouse gas that was emitted by them became important. As a result, greenhouse gas (GHG) regulations are being strengthened and efforts are being actively made to reduce greenhouse gas emissions in the automotive industry. In the other hand, regulations for harmful emission of vehicles have been reinforced by step. Especially, the lastly applied step, so called Euro 6, not only decreased NOx limit down to half of Euro 5 but also introduced real driving emission limit for NOx and PN. It is a challenge for manufacturers to meet the recent GHG regulation as well as the latest emission regulation. To overcome these regulations a De-NOx after-treatment system is being applied to diesel vehicles that are known emitting the lowest GHG among conventional internal combustion engines. At the time of the introduction of Euro 6 emission standard in Korea, in the domestic fuel economy certification test, some diesel vehicles emitted more $CH_4$ than Euro 5 vehicles. As a result, it was confirmed that LNT-equipped vehicles emitted a high level $CH_4$ and the level exceeded the US emission standard. In order to determine the reason, various prior literature was investigated. However, it was difficult to find a detailed study on the methane increase with LNT. In this paper, to determine whether the characteristics of vehicles equipped with LNT the affects the above issue and other greenhouse gases, 6 passenger cars were tested on several emission test modes and ambient temperatures with a environment chamber chassis dynamometer. 2 cars of these were equipped with LNT only, other 2 cars had SCR only, and LNT + SCR were applied to remaining 2 cars. The test result shown that the vehicles equipped with LNT emitted more $CH_4$ than the vehicles with SCR only. Also, $CH_4$ tended to increase as the higher acceleration of the test mode. However, as the test temperature decreases, $CH_4$ tended to decreased. $CO_2$ was not affected by kinds of De-NOx device but characteristic of the test modes.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.175-180
• /
• 2018

In this study, CFRP was manufactured with the laminate angle of $45^{\circ}$. The specimen of TDCB bonded with the adhesive for structure was designed by CATIA and the analysis was progressed by using the finite element analysis program of ANSYS. This study model was designed on the basis of British industry and ISO standard and the configuration factor(m) was established with variable according to the angle of model configuration. As the study result of this paper, the maximum deformations at the specimens with the tapered angles of $4^{\circ}$ and $8^{\circ}$ become most as 12.628 mm and least as 12.352mm respectively. Also, the maximum equivalent stresses at the specimens with the tapered angles of $6^{\circ}$ and $8^{\circ}$ become most as 9210.3 MPa and least as 4800.5 MPa respectively. The damage data of TDCB structure with the laminate angle which was manufactured with CFRP could be secured through this study result. As the damage data of TDCB structure bonded with CFRP obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.3
• /
• pp.169-183
• /
• 2019

Should a startup file for a patent subject to imitation in its quest to attract venture capital(VC) investors? Considering the US pharmaceutical biotechnology industry context, this paper attempts to answer this question by investigating the relations between the number of applied patents of startups, patent imitability, and the total amount of money the startups received as their first VC funding round. Data of 157 US-based pharmaceutical biotechnology startups founded in between 1995 and 2005 are analyzed. Empirical results from this study show that the number of applied patents is positively related to the total amount of money received at the time of the first funding round, and patent imitability is negatively related to the total amount of money received as first VC funding round. Nonetheless, the interaction term between the number of applied patents of startups and patent imitability came out as positive, raising interesting questions and implications for innovation-oriented startup entrepreneurs. The current study's empirical findings suggest that, in the pharmaceutical biotechnology sector, VC investors pay attention to the quantity and quality of the patents possessed by startups when they decide the level of funding. In particular, imitability of applied patents may not be a one-sided concept related to negative features such as the weak protectability of an invention. Rather, patent imitability may be a multi-facet element which also contains positive attractiveness of the startup's invention. Furthermore, it seems that the positive side of imitability can be augmented by the number of applied patents.

• Journal of Construction Engineering and Project Management
• /
• v.8 no.4
• /
• pp.1-24
• /
• 2018

In the last decade, the use of Building Information Modeling (BIM) as a new technology has been applied with traditional Computer-aided design implementations in an increasing number of architecture, engineering, and construction projects and applications. Its employment alongside construction management, can be a valuable tool in helping move these activities and projects forward in a more efficient and time-effective manner. The traditional stakeholders, i.e., Owner, A/E and the Contractor are involved in this BIM system that is used in almost every activity of construction projects, such as design, cost estimate and scheduling. This article extracts major features of the application of BIM from perspective of participating BIM components, along with the different phrases, and applies to them a logistic analysis using a fuzzy performance tree, quantifying these phrases to judge the effectiveness of the BIM techniques employed. That is to say, these fuzzy performance trees with fuzzy logic concepts can properly translate the linguistic rating into numeric expressions, and are thus employed in evaluating the influence of BIM applications as a mathematical process. The rotational fuzzy models are used to represent the membership functions of the performance values and their corresponding weights. Illustrations of the use of this fuzzy BIM performance tree are presented in the study for the uninitiated users. The results of these processes are an evaluation of BIM project performance as highly positive. The quantification of the performance ratings for the individual factors is a significant contributor to this assessment, capable of parsing vernacular language into numerical data for a more accurate and precise use in performance analysis. It is hoped that fuzzy performance trees and fuzzy set analysis can be used as a tool for the quality and risk analysis for other construction techniques in the future. Baldwin's rotational models are used to represent the membership functions of the fuzzy sets. Three scenarios are presented using fuzzy MEAN, AND and OR gates from the lowest to intermediate levels of the tree, and fuzzy SUM gate to relate the intermediate level to the top component of the tree, i.e., BIM application final performance. The use of fuzzy MEAN for lower levels and fuzzy SUM gates to reach the top level suggests the most realistic and accurate results. The methodology (fuzzy performance tree) described in this paper is appropriate to implement in today's construction industry when limited objective data is presented and it is heavily relied on experts' subjective judgment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2019

In this paper, a manufacturing method of an anti-glare cover glass on LCD for outdoor use is proposed. The main specification of cover glass is hardness and anti-glare. Hardness is achieved by using the tempered glass, and anti-glare(AG) film is laminated to meet anti-glare specification no the tempered glass. However, the AG film is difficult to maintain the AG performance continuously because the abrasion resistance of the PET film itself is as weak as about 3H. Therefore, a novel production procedure using screen printing method is proposed. The proposed coating is implemented by applying $ZnO-B_2O_3-SiO_2$ powder on glass surface and the glass is made with enhanced hardness through tempering process. In order to apply the ZBS powder uniformly on the glass surface, a screen printing process is used. The main parameters to be considered in screen printing are the oil concentration and mesh opening size. Because the amount of ZBS powder applied to the printing process is controlled by these two parameters, the correlativity is confirmed through the experiments. In order to evaluate the performance of the proposed method, the haze, surface roughness and transmittance are selected as the performance index and are compared with the AG film. As a result of comparison, it is verified that the transmittance of the proposed tempered glass is 83.1%, which is slightly lower than 89.5% of AG film, but the hardness is more than double to 7H.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.179-184
• /
• 2019

In many countries, such as developing countries where electricity is scarce, small wind turbines in the form of Off Grid are an effective solution to solve power supply problems. In some countries, the expansion of power systems and the decline of electricity-intensive areas have led to the use of small wind power in urban road lighting, mobile communications base stations, aquaculture and seawater desalination. With this change, the size of the small wind power industry is expected to have greater potential than large-scale wind power. In the case of small wind power generators, the generator is controlled at a variable speed, and the voltage and current generated by the generator have many harmonic components. To solve this problem, the AC to DC converter to be studied in this paper is a three-phase step-up type converter with a single switch. The inductor current is controlled in discontinuous mode, and has a characteristic of having a unit power factor by eliminating the harmonic of the input current. The proposed converter is composed of LCL filter and three phase rectification boost converter at the input stage and a single phase full bridge for grid connection. It is a control system with energy storage system(ESS) that the system stabilization can be pursued against the electric power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.509-519
• /
• 2019

The size of the global game market, including Korea, is gradually expanding, there are about 80,000 people in the game industry in Korea, and it has maintained a steady increase. As the domestic game has become more influential, games have become a means of helping people to communicate with each other in everyday life. Despite these changes, There is a lack of positive perspectives such as game use and interpersonal interactivity or communication enhancement. Therefore, this study analyzed the correlation of psychological and environmental factors of adolescents, game leadership, and social capital in order to understand the positive effects of games. As a result of research, psychological factors such as social motivation, game efficacy, and game norms have a statistically significant effect on game leadership. Parental supervision has a negative effect on game leadership and a statistically influenced positive effect on social capital. Overprotective parenting has a negative effect on both game leadership and social capital. Finally, game leadership has a statistically influenced positive effect on social capital. This paper is meaningful in that the research on the positive aspect of the game was conducted for the adolescent.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.175-183
• /
• 2018

This study analyzes determinants of bond returns in terms of systematic risk versus idiosyncratic risk by examining relationship among those factors. First we examined the cross-sectional determinants of corporate bond returns with Korean bond market data from 2001 to 2014. This paper uses term factor and default factor for systematic risk, and duration factor and credit rating factor for idiosyncratic risk. The empirical result shows that systematic risk can explain cross-sectional differences of bond returns rather than idiosyncratic risk which is the same result in advanced markets(US or Europe). This result is different from the previous Korean studies which showed that idiosyncratic risk is more important than systematic risk in Korean bond market. The reason for the different result may be the longer sample period which includes the most recent period. It is insisted that Korean bond market is getting more synchronized with the advanced bond market. In conclusion, this empirical result implies that Korean bond portfolio managers should focus on systematic risk, which is contrary to current system in Korean asset management industry.